Replacing Mower Deck Bearings on a John Deer or other mower

Рет қаралды 62,483

3 жыл бұрын

This video will show you how to replace your lawn mower deck bearings. It will explain how to know if your mower deck bearings are going bad. I will show you how to remove and replace your mower deck bearings. I will explain the techniques you can use to remove stubborn bearings from the spindle shaft. Most brands of mowers have similar bearings. This video should be helpful in showing you how to replace mower deck bearings in most mowers.
Please give this video a THUMBS UP and SHARE it with your friends.
Please LIKE and SUBSCRIBE
Support from viewers like you is what keeps us going.
Thank you for your support.
This video is NOT sponsored. Some product links are affiliate links which means if you buy something we'll receive a small commission.
Equipment used in making this video:
Nikon D7100 DSLR: amzn.to/3wKhrse
GoPro HERO9 Black: amzn.to/2RXkbE1
Rode Wireless Go Microphone: amzn.to/3wSv34O
Please visit our website at:
diywithwayne.com
Visit us on Facebook:
/ diywithwayne
The focus of our KZfaq Channel is to help you save money by doing things yourself!
Please visit our new KZfaq Channel , "Bucket List Time with Ann and Wayne"
/ @bucketlisttime
Thank you for visiting and have a great day!
Wayne

Пікірлер: 146

@PatrickBarton 2 күн бұрын

This video sure came in handy today. Bought two new complete spindles. Broke a bolt off in one. Disassembled it and used an old housing to rebuild it. Thank you sir.

@DIYwithWayne 16 сағат бұрын

You are very welcome and thank you for visiting, have a great day.

@paulnavara7127 4 сағат бұрын

Very informative video Wayne! Enjoyed watching and learning. Thanks for posting!

@kbelle8700 11 күн бұрын

Thank you for your complete instructions. As a woman having to do this myself, i am grateful! Even the size of sockets. Thank you!

@DIYwithWayne 11 күн бұрын

You are very welcome and thank you for visiting, have a great day.

@sumdawgtwigg 4 ай бұрын

These videos make me think of hanging out with some of the older folks like my dad and uncles. They have so much to teach!

@DIYwithWayne 4 ай бұрын

Older folks are a wealth of information and a very unused resource. I really enjoyed reading your comment. Thanks for visiting and have a great day.

@josecastro2078 2 ай бұрын

Wayne you are the best, really well explain and easy to understand...

@DIYwithWayne 2 ай бұрын

Thank you for the kind comment and for visiting, have a great day.

@tacopupps Ай бұрын

Thank you for this video. It was superbly detailed yet simple enough to understand. I got my bearings (set of 6) for my 48" deck on Ebay for $20.00.

@DIYwithWayne Ай бұрын

Great to hear! Thank you for the kind comment and for visiting, have a great day.

@Blimkat 3 ай бұрын

Thanks Wayne! I just needed to see the part about how to get it apart. Didn't realize at a glance they're just pressed/friction fit in. Easy! So much cheaper to replace the bearings than buy a spindle assembly!

@DIYwithWayne 3 ай бұрын

Good luck with your project thanks for watching and have a great day.

@ickysticky710 2 жыл бұрын

I've done it deck off, but without removing the spindles. Saves time. Thanks for your post.

@DIYwithWayne 2 жыл бұрын

Thanks for the comment but I like removing the deck. I'm old and don't get down and up like I used to LOL Thank you for visiting and have a great day.

@jimdavison4077 2 жыл бұрын

@@DIYwithWayne No Wayne he said he didn't remove the spindles meaning the spindle housing. Many people don't remove the housings because of the risk of bolts snapping off or splitting the housing since steel bolts and aluminum housings oxidize. When there is no need to remove them best not to risk it. Also if you put the nut back on the top threads and remove the grease fitting so there is no chance of breaking it off then there is zero harm hitting the top of the shaft to drive it out the bottom with a normal hammer or even small mall. Using a real hammer speeds the process up. But over all a good video and congratulation on the channel, your videos help lots of people do things they might have to pay someone else to do for them,

@Jane1918R 13 сағат бұрын

Great video

@rachealrock3638 2 жыл бұрын

You had me at the first growl when putting that socket on the impact driver

@DIYwithWayne 2 жыл бұрын

LOL I'm glad you enjoyed it. Thank you for visiting and have a great day.

@Ubernator 3 жыл бұрын

Just bought a used D110 and this is the exact video I needed. Thanks for the insight!

@DIYwithWayne 3 жыл бұрын

Glad it was helpful! Thank you for the kind comment and for visiting, have a great day.

@bertgrau3934 Жыл бұрын

I've replaced a lot of bearings, most mower shops tell you, you can't change the bearings, you need to change the entire spindle. As you just showed folks, you can replace just the bearings. Great video Sir.

@DIYwithWayne Жыл бұрын

Yes you can. I have been replacing bearings like this for over 40 years. The spindles have changer VERY little over the years. Thank you for the kind comment and for visiting, have a great day.

@sheri023 2 жыл бұрын

Thank you, I learned a lot, and it was easy to understand all the steps by how you presented it.

@DIYwithWayne 2 жыл бұрын

Glad it was helpful! Thank you for the kind comment and for visiting, have a great day.

@Fictitious_Character Жыл бұрын

Thanks for the good informative video on the spindle bearings. I've only seen vids on replacing the spindle, nothing on just the bearings. I figure there's some spindle replacement coming up, and this gives a whole other option that looks straightforward enough.

@DIYwithWayne Жыл бұрын

I'm glad you found it. I've been replacing just the bearings for 50 years now. Good luck with your project and have a great day.

@madmullet69 Жыл бұрын

Thanks a lot for sharing this. Your video is very well explained and filmed . Got halfway through mowing and could feel nasty vibrations so off with the deck tomorrow lol

@DIYwithWayne Жыл бұрын

Good luck with your project! Thank you for the kind comment and for visiting, have a great day.

@rondopham7178 Жыл бұрын

Thank you for the video. Everyone on youtube is full sheez on their videos. Nothing to do with removing the sheaves.

@DIYwithWayne Жыл бұрын

Thank you for the kind comment and for visiting, have a great day.

@lancenorton1117 2 жыл бұрын

Thank you for the video about replacing the bearings. A few weeks ago I bought a 1988 John Deere 185 and after watching a video where they said to throttle the motor down bear idle so you can more easily hear the bearing noise all I could hear was LOTS of grinding as you presented in your video. Tomorrow BEFORE I drop the deck I am going to remove the belts so I can spin the individual shafts and see if all three are bad.

@DIYwithWayne 2 жыл бұрын

If any are bad, I would suggest replacing all 3 sets. They are not hard to replace and a lot of the work is in getting to them. Good luck with your project and have a great day.

@lancenorton1117 2 жыл бұрын

@@DIYwithWayne Bought new bearings for every shaft. They do not seem too bad,,,,BUT the mower is OLD. And the blades were really bad.

@toomanyhobbies4713 2 жыл бұрын

Very good video, thank you. Going to "play" with my JD today.

@DIYwithWayne 2 жыл бұрын

Thank you!. Have a great day and enjoy your "playtime"!

@aaron5785 3 ай бұрын

Thanks for the video, exactly what needs to be done on my dads La115 mower.

@DIYwithWayne 2 ай бұрын

Doing it yourself saves a LOT of money. Good luck with your project and have a great day.

@gavinkarey-mckenna1353 2 ай бұрын

I have watched other videos where they took off the seal, repacked the bearings, resealed and installed. Grease will work past the seals to the bearings, just takes a lot of grease and grease pressure.

@DIYwithWayne 2 ай бұрын

You are correct but I just like taking the inside seal out best. Thank you for your suggestion and for visiting our channel. We hope you have a great day.

@philliphall5198 Жыл бұрын

Replacing brg is smart and saves money, plus you can fix them to take grease also Thank You

@DIYwithWayne Жыл бұрын

Thank you for the kind comment and for visiting, have a great day.

@doug1234dougx 2 жыл бұрын

Fantastic video! Thank you.

@DIYwithWayne 2 жыл бұрын

You are very welcome and thank you for visiting, have a great day.

@tnhwyman Жыл бұрын

Thank you for taking the time and effort to explain. Much appreciated I assure you. My project was my z435 48" deck. I need to invest in an impact wrench, it would have been helpful today. I got it done with 1/2" long handle drive ratchet. A 22mm socket on the pulley and 19mm socket on the blade.

@DIYwithWayne Жыл бұрын

Glad it helped Thank you for the kind comment and for visiting, have a great day.

@almolloy5817 2 жыл бұрын

23:09 Use Loctite 620 for bearing bores that have become a bit worn. Works well.

@DIYwithWayne 2 жыл бұрын

I have never tried that but will remember your suggestion next time. Thank you for visiting and have a great day.

@johnc6157 11 ай бұрын

Very informative. Thanks.

@DIYwithWayne 11 ай бұрын

Glad it was helpful! Thank you for visiting and have a great day.

@howardjack1103 Жыл бұрын

sometimes fun and games. I was farmsitting and the lady had bought a mower at auction and asked me to change sharpen the blades. Oh man were they stuffed. But worse was te paly and grinding in 2 of the 3 spindles. Stripped them down and some bodgey ( that's Kiwi for rough) had been done before. old bearings used for spacer, angle grinder used to remove jammed inner race and the spindle gouged. She didn't want to buy a new spindle so was going to get it welded! Probably about the same cost as buying a new one. I left it in pieces for her to finish off!

@DIYwithWayne Жыл бұрын

Sounds to me like she is going to waste her money and end up purchasing new spindles anyway. Like you, I would have walked away. Thank you for visiting and have a great day.

@hottubking1229 2 ай бұрын

I like to throw the new bearings in the freezer for a couple of hours, to slightly contract the metal, before tapping them in place. I also use the old bearings in between the new ones to tap in place. I never directly tap the new bears with a hammer.

@DIYwithWayne 2 ай бұрын

Thank you for your suggestion and for visiting our channel. We hope you have a great day.

@bertgrau3934 Ай бұрын

Those bearings are 6203 RS most spindle, and idler pulleys use the same bearings. With an idler pulley, I drill out the pop rivets and use nuts and bolts to put back together. Mych cheaper than new idler pulleys. I also buy the bearings in a 10 pack on line usually less than $2 per bearing.

@DIYwithWayne Ай бұрын

Thank you for the information and for visiting our channel. We hope you have a great day.

@bertgrau3934 Ай бұрын

@@DIYwithWayne Thank you, and good luck with your zero turn, Sir

@nmccammo 2 жыл бұрын

Nice video!

@DIYwithWayne 2 жыл бұрын

Thanks! Thank you for visiting and have a great day.

@muhammadsaad6953 5 ай бұрын

Very informative 👍❤️👍

@DIYwithWayne 4 ай бұрын

Thank you for visiting and have a great day.

@MrHarrow5 10 ай бұрын

Awesome mate

@DIYwithWayne 10 ай бұрын

Thank you for the kind comment and for visiting, have a great day.

@billsimpson604 2 ай бұрын

You might be able to take up the wear in that housing by wrapping the new bearing with aluminum foil and driving it in. Once it is driven inside the hole, I don't see how it could get out, maybe put some thread locker on it to keep it in place.

@DIYwithWayne 2 ай бұрын

Next time I may try your idea. Thank you for your suggestion and for visiting our channel. We hope you have a great day.

@Deucealive75 Ай бұрын

Many years ago when I was a mechanic, I used Loctite 680 for this. It's pretty much a "fill the gap" Loctite that is made for this and works well.

@DIYwithWayne Ай бұрын

Thanks for the suggestion. Next time I will try that.

@brianbeaubien1947 Жыл бұрын

Quick hint throw those bearings in the freezer over night metal shrinks making it easier

@DIYwithWayne Жыл бұрын

Thank you for your suggestion and for visiting our channel. We hope you have a great day.

@carguy4sp 2 жыл бұрын

One of the other you tube mower repair guys says you can use a center bunch around bearing race to expand the bearing area and to tighten up the fit of the bearings. He demonstrated it on a old worn out crastman deck and it did tighten up the bearing install.

@DIYwithWayne 2 жыл бұрын

Thank you for your suggestion and for visiting our channel. We hope you have a great day.

@larryreno8293 17 күн бұрын

I would not suggest that. The race is extremely hard and you will more than likely distort the race or even fracture it. It is best peen the housing in which the bearing is pressed into because it is a softer metal and doesn’t distort the bearing itself.

@johnmilner7603 3 ай бұрын

You can get grease sealed bearings. It takes 80 pumps. There’s a youtube video showing a different color grease getting inside. I tried it on my John Deere X300. By the time my bearings wobble and become loose it’s chewed into the housing. I just buy new spindles.

@DIYwithWayne 3 ай бұрын

Thank you for your suggestion and for visiting our channel. We hope you have a great day.

@mechRuud 10 ай бұрын

.................. LIKED VIDEO ....................

@DIYwithWayne 10 ай бұрын

Thank you for visiting and have a great day.

@FendergtrJam Жыл бұрын

Great video I got my bearings and all my tools ready actually going to do mine today and if things go as planned I'll be mowing soon I have one question now I know my Jhon deare inside and out but never changed bearings out just new spindles 🤑 "That's What She Said " So why should we remove any seal ? Awesome Video I felt like I was there with ya God Bless my PAPI 👍

@DIYwithWayne Жыл бұрын

I only removed the seal that points to the inside of the housing. This lets the grease you add over time using the grease fitting get into the bearings. If you don't remove the inside seal, it is more difficult for the grease to get inside the bearing. Good luck. Thank you for visiting and have a great day.

@FendergtrJam Жыл бұрын

@@DIYwithWayne Thank you Sir for your quick reply It mkes since and i will do that... I forgot to Subscribe I will do it now...Thank's

@DIYwithWayne Жыл бұрын

Thank you for subscribing. It helps us grow.

@j.richardsnavely4083 2 ай бұрын

I would recommend anti seize on your bolt treads

@DIYwithWayne 2 ай бұрын

Thank you for your suggestion and for visiting our channel. We hope you have a great day.

@grahamsmith347 3 ай бұрын

Great vidio ,but i havent seen a vidio how to change drive ,and idler .bearings ? being 6203 ,common bearings on John Deere.

@DIYwithWayne 3 ай бұрын

For those, I would replace the pulley. Most are riveted together and yes you could take them apart but the assembly not very expensive. Good luck with your project and have a great day.

@ironmartysharpe8293 2 жыл бұрын

Use a torque wrench for final tightening to prevent stripping threads or snapping bolts , Especially with the bearing housings which looks like die cast aluminum which bolt threads strip very easily , I only use an impact wrench for loosening and use a torque wrench for final tightening

@DIYwithWayne 2 жыл бұрын

Thank you for your suggestion and for visiting our channel. We hope you have a great day.

@ironmartysharpe8293 2 жыл бұрын

@@DIYwithWayne You're welcome However , If you happen to strip the threads Especially with aluminum parts , The best way to fix it is with a Heli Coil thread repair kit , I've used the Heli Coil many times with great success

@donjones4372 Жыл бұрын

I did the same but I hand packed the bearing before I tapped them in, also I hand packed the housing, some don’t have zerts

@DIYwithWayne Жыл бұрын

Good job! Thank you for visiting and have a great day.

@thehomewizard1 2 ай бұрын

I was wondering about packing them before install

@nmccammo 2 жыл бұрын

Cleaning with A little emery cloth or steel wool would help slide that top collar on

@DIYwithWayne 2 жыл бұрын

That's a good idea! Thank you for your suggestion and for visiting our channel. We hope you have a great day.

@TheBeeMan1994 Жыл бұрын

I’ve got an older Deere 170 mower, and there is a double groove pulley (has a belt on the top that comes from the PTO to the deck, then the bottom pulley drives the belt for the deck) that is making a lot of noise, do you know if that double groove pulley uses the same bearings as the spindles?

@DIYwithWayne Жыл бұрын

I don't know but it might be the same. Thank you for visiting and have a great day.

@mrcrawford87 2 ай бұрын

What were the size of bearings you replaced in the spindles?

@DIYwithWayne 2 ай бұрын

I don't know the size. I just took one to a mower repair store and they had bearings that matched. Thank you for visiting and have a great day.

@texascottonfarmer Ай бұрын

The old bearings you took out were sealed. You can't put grease in sealed bearings.

@DIYwithWayne Ай бұрын

Sure you can. The pressure from the grease gun will push the grease past the seals. The seals are only good for keeping dust and dirt out. Thank you for visiting and have a great day.

@winterhorse290 11 ай бұрын

JB weld will hold the bearing in place. You are going to replace the housing next time anyway.

@DIYwithWayne 11 ай бұрын

Your suggestion may work for some people but I have never let mine get that bad. I have had mowers like this for over 50 years and have never replaced a spindle. Thank you for your suggestion and for visiting our channel. We hope you have a great day.

@kodak_jack 4 ай бұрын

If you're replacing the whole spindle assembly, make sure the ones you order have grease fittings so your bearings don't dry up and fail. Not all of them come that way.

@DIYwithWayne 4 ай бұрын

Thank you for your suggestion and for visiting our channel. We hope you have a great day.

@kodak_jack 4 ай бұрын

@@DIYwithWayne I'd also like to encourage those who have problems like this to invest in the equipment and do it yourself. Calling a dealer is the most expensive thing you can do!!!!!!!!

@frankiesun09 2 жыл бұрын

What bearing size did you order? ID AND OD?

@DIYwithWayne 2 жыл бұрын

The bearings will be stamped with a part number that can be used by the parts people to identify the replacement size. If you go to a John Deere Dealer they will know what size they are. I also try to take one of the old bearings with me to get replacements to be sure I get the correct ones. In other words I don't know the OD and ID of the bearings. Thank you for visiting and have a great day.

@evans1946 2 жыл бұрын

If grease comes out on the pulley side like that then it's been pumped so full of grease it popped the seal off the bearing. That's not good. You want to stop pumping in grease before it forces off the bearing seals.

@DIYwithWayne 2 жыл бұрын

Thank you for your suggestion and for visiting our channel. We hope you have a great day.

@TheCaperfish 5 ай бұрын

its a dust cover not a seal and it cannot come off because the bolts have a flat area against them that rest against the covers and are beveled on the outter edge to let the grease get by , you are suppose to grease till it comes out end so you can flush old grease out , also please tell me how you know when to stop pumping grease so it gets into bearing it doesn't come out , that is like one pump difference , if you know that you know the lottery numbers lol

@jonnymo4728 2 жыл бұрын

What about torque settings on bolts?

@DIYwithWayne 2 жыл бұрын

I have never used a torque wrench on them. John Deere may have a setting but I just tighten them good and tight. Thank you for visiting and have a great day.

@jonnymo4728 2 жыл бұрын

@@DIYwithWayne Thanks for the reply. I just wondered and I anticipated the response. In most cases tight enough is what you want. And with an impact wrench you'll get it.

@steve2736 11 ай бұрын

The factory torque setting for John Deere blade nuts is 65 ft lbs, as according to the owner’s manual for the 100 series.

@billywillis5687 5 ай бұрын

They come with sealed bearings, you can grease that shaft all you want to but the grease will.never get into the bearings. You need to take inside seal out of bearings and and put back in with open side of bearing to the inside of shaft. Then grease can get in the bearings. You won't have to change bearings for many years after that as long as you keep them greased

@DIYwithWayne 5 ай бұрын

That is what I said in the video. Thank you for visiting and have a great day.

@TheCaperfish 5 ай бұрын

lol those are not seals they are dust covers and grease goes right past them , a grease gun puts out 10 000 psi , grease until you see it come out ends of spindle , therefore you know you are flushing out the old contaminated grease that is in bearings .

@raywatson6701 Жыл бұрын

You can't grease sealed bearings that's why you remove the inner seal

@DIYwithWayne Жыл бұрын

You can but it does not do a good job. Thank you for visiting and have a great day.

@TheCaperfish 5 ай бұрын

those are not seals they are dust covers and grease goes right past them , a grease gun puts out 10 000 psi , grease until you see it come out ends of spindle , there fore you know you are flushing out the old contaminated grease that is in bearings .

@williamr.3437 Жыл бұрын

Part # of bearing would help.

@DIYwithWayne Жыл бұрын

The old part number will be stamped in the bearing and different manufacturers will have different part numbers. If you go to a John Deere Dealer, they will know what you need. If you go to a parts place, they should be able to match your old bearing to what they sell. Good luck with your project and have a great day.

@colinreid7305 Жыл бұрын

Very nice video. If the seal is removed from the top bearing, gravity and centrifugal forces may result in the top bearing running’s dry. If grease is forced out of the spindle assembly two things may happen, the bearings may be lifted from their seats or moisture will be attracted to the grease and find it way into the assembly. The bearings are sealed for a reason, but before fitting they should be inspected for the correct amount of grease even if it means having to repack the new bearings. The grease nipple is provided to ensure the spindle shaft is lubricated and to reduce heat build-up. The fact that there is no exit point for the grease means that over filling can result and not having an exit point means that once the spindle is cavity is filled with grease it will not require replacing for the life of the spindle. In my experience John Deere spindles will last 150 hours before the bearing require replacement.

@DIYwithWayne Жыл бұрын

I have not had the problems you describe. Your comment does make me think and I wonder what others think? Thank you for visiting and have a great day.

@cb6879 Жыл бұрын

They’re only $15 for a set of 4 on Amazon

@DIYwithWayne Жыл бұрын

That's good to know. Thank you for visiting and have a great day.

@leetingler619 4 ай бұрын

Remember the lower bearing assembly is slightly larger in diameter 😅

@DIYwithWayne 4 ай бұрын

I'm not following you. All the bearings are the same part number, so they are the same size. Thank you for visiting and have a great day.

@leetingler619 4 ай бұрын

According to John Deere, the lower bearing is larger. Maybe on other brands, it is not.

@DIYwithWayne 4 ай бұрын

That could be, but on my John Deere they are the same.

@Deucealive75 Ай бұрын

Pro tip. If there's room for an impact gun then use a gun. If there's no room for a gun, then use an air rachet.

@DIYwithWayne Ай бұрын

Thank you for your suggestion and for visiting our channel. We hope you have a great day.

@conradsenior5843 3 ай бұрын

amazon 10 of them for $15.19

@DIYwithWayne 3 ай бұрын

That's a very good price. Thank you for visiting and have a great day.

@user-dq5xx8gy8k 7 ай бұрын

Should grease

@DIYwithWayne 7 ай бұрын

Should Grease what? I did show adding grease to the bearings.

@ejb9545 Жыл бұрын

Freeze the bearings and they drop in with no banging

@DIYwithWayne Жыл бұрын

Thank you for your suggestion and for visiting our channel. We hope you have a great day.

@alanlashley943 Жыл бұрын

Should have hand packed bearings before install, easy time to do it, know you will pump them after but you know their purged. Just saying...

@DIYwithWayne Жыл бұрын

Thank you for your suggestion and for visiting our channel. We hope you have a great day.

@LimestoneCoastCustoms 4 ай бұрын

Interesting that there is a grease point on each hub (yes, I own a small Deere ride on) yet the bearings are sealed! No amount of grease you put in there is going to help them at all!

@DIYwithWayne 4 ай бұрын

The pressure applied with a grease gun in more than is needed to get past the seals. The grease will get into the bearings. Thank you for visiting and have a great day.