Replacing Prop Bearing - Fixing MOT failure (Transit mk6)
Рет қаралды 3,900
3 жыл бұрынReplacing the prop bearing on my mk6 Transit.
@BASHER316404 10 ай бұрын
The bolt that holds the yoke together fits through the splines as soon as the lock plate is slid out saving you from taking the bolt and lock washer out.
@maxautouk 10 ай бұрын
Good tip thanks for the comment
@davidboothby5085 3 жыл бұрын
Great video, it was a lot of help thanks
@maxautouk 3 жыл бұрын
Thanks for the comment glad it helped you out!!
@Dave_Vee 3 жыл бұрын
Did you not put the new bearing facing the wrong way round? The original one had the thick rubber facing the front of the van. Its designed that way so as to protect the bearing and not to collect dust etc from road? Good video still!!
@maxautouk 3 жыл бұрын
Hey yeah I did it did swap it around because snow gets behind it and sits there and destroys the bearing so I switch the boot the other way and it lasts a lot longer, the other side still had dust seals although obviously it's not as robust
Turners Workshop
Рет қаралды 73 М.
Auto Moto how to?
Рет қаралды 11 М.
Easy Fix
Рет қаралды 2,3 МЛН
Andian Autos Motorsport
Рет қаралды 55 М.
How does the Adblue SCR DEF system work? Explained Diesel Exhaust Fluid Selective Catalyst Reduction
GarageTech
Рет қаралды 358 М.
repairvehicle
Рет қаралды 349 М.
its.maarten
Рет қаралды 6 МЛН
jamoloniy
Рет қаралды 864 М.
narezka:)
Рет қаралды 1,8 МЛН