Repoint Dart pin without using repointing tools

Рет қаралды 38,762

4 жыл бұрын

How to repoint your Dart Pin without using any repointing tools
Dart pin
Monster barrel design 22g 90%tungsten
Point
Harrows Apex Point 26mm
Harrows Apex Point lance 26mm
Apex point lance 26mm
Harrows point
Monster barrel design
22g
The Cobra barrel
Repoint
Repointing

Пікірлер: 40

@chengliu5818 3 жыл бұрын

Cheaper then any repointing tools , thank you so much !

@froilanpamatian748 3 жыл бұрын

It's better if you use an old aluminum shaft, cut it then screw it in so your barrel won't have dents on the inside.

@jasonreilich8398 Жыл бұрын

Touche.

@MetalJuggler Жыл бұрын

That was really nice. Some of my more expensive darts, using the regular tool was almost impossible. Time to visit a friend with a garage 😃

@michaelkaybecker Жыл бұрын

Hmm I wonder if you could push the tips in with a vice and something soft like a 2x4 to prevent tip damage.

@michaelkaybecker Жыл бұрын

I tried 4 different rivet guns and not one of them had jaws strong enough to grip the harder steel the points are made of. No clue how yours worked so easily.

@darwindarwinnunez27 3 ай бұрын

Thank you

@raulgepiga7277 2 жыл бұрын

Hello, there. Is the robson messina im using now can be replace? Any recommendations for the nice point? Jt Gepiga Philippines

@renevandijk6807 Жыл бұрын

Great idea! Saved me €60

@MrCYCOFATT 3 жыл бұрын

Or use the same rivet tool as a clamp to hold the new points, and hammer the backside.

@jepatawaran 3 жыл бұрын

This. This is a great idea. Thanks! How to upvote 5x tho.

@lardy70s Жыл бұрын

Great video and concept, but i would use a hide or plastic hammer to strike your barrel into your new points.

@johnethanmatchon6145 4 жыл бұрын

Amazing,,,wow,,,😮😮😮

@Tracks777 4 жыл бұрын

lovely content

@itsmeremember1435 4 жыл бұрын

Thank you

@tonysnyman3348 Жыл бұрын

I would rather try installing the tip by heating the barrel up with a heat gun and cooling the tip down as much as possible with ice or in a feezer. Any thoughts on this?

@windartsru 3 жыл бұрын

Hi, good job! What model of darts and tips in this video?

@itsmeremember1435 3 жыл бұрын

Barrel : The Monster Cobra II Point : Harros Apex Point

@maxcastingtrip9117 4 ай бұрын

Wht name this tools

@Chelskie-darts 3 жыл бұрын

I don’t think I could bring myself to start hitting my darts with the hammer lol , must be a better way to get the points in without the use of the hammer , the way you took them out was fab but I think I’d rather spend the £35 and get the repointing tool , lovely darts you had tho mate 👍🏼

@itsmeremember1435 3 жыл бұрын

Yes bro.. much better if we install the points in correct tools.. some here in ph. Were looking other option to install it.. some of us dont enough money to buy repointing tools thats why.. sorry about that bro.. btw thanks

@Chelskie-darts 3 жыл бұрын

@@itsmeremember1435 : nah don’t worry about that mate you don’t have to apologise you gotta do what you gotta do with what you can afford 😃 it’s good that you can find other ways but imagine breaking afew of ur points ? It would then cost just as much as the £30 for the repoint tool , and if you have afew friends who also play darts you could split the cost and share the item so you’d could all use it when necessary 👍🏼 still impressive how you’ve came up with a solution when u don’t have the right tools we’ve all done it in life lol

@trevorclapham5571 3 жыл бұрын

Rubber mallet then you don’t need a nail either

@grai9529 2 жыл бұрын

You said without tools??

@thetinyman4538 3 жыл бұрын

Do I need a chopping board as well?

@itsmeremember1435 3 жыл бұрын

No.. its better if you have a pcs of wood..

@wespetit150 Жыл бұрын

Looks nice, but points are to short.

@DartsDepotPH 6 күн бұрын

The instructions will confuse people outside of the Philippines. The things you repointed are called darts, not dart pins. I also would not recommend using a rivet tool if you intend to reuse the old dart points as rivet tools leave bite marks on the points. You also mentioned "check the hole on your pin". Remember, other parts of the world would think of pins as the points. The holes are on the barrels, not the pins. It would be best NEVER to call darts, dart pins.

@nazmieismail2953 3 жыл бұрын

prevet or rivet tools?

@itsmeremember1435 3 жыл бұрын

Rivet tools

@symonaban9260 3 жыл бұрын

Imagine repointing a reflex point

@uksnusreviews9455 4 жыл бұрын

How to change points without repointing tools: first step use a point removal tool (also known as a repointing tool). Step 2, bash the living shit out of you brand new point with a hammer. Just buy a repointing tool.