RESET Motorcycle gear indicator Glpro on problems

Рет қаралды 31,875

5 жыл бұрын

Motorcycle gear SMOK Gear RESET on problems. Video englisch.
How to Reset a Healtech GIPro X-Type or DS Series Gear Indicator.
model: Glpro-X or GIpro X-type G2 or SMOK

Пікірлер: 80

@tanpham1975 4 жыл бұрын

Your video is better than all videos out there without you speaking a word. Thank you 😊

@MarcuttiMarco 4 жыл бұрын

Hi Tan Pham Wau BRO, Thank you very much for the great compliment. Yeah I know there are not so good videos about it. greetings from switzerland marco

@detroitjay8020 3 жыл бұрын

Wow great video SMH 🤦🏾‍♂️ I don't know why I didn't think to look up gear indicator reset, I first brought the cheap $15 one but after a month stop working so I bought for $52 with a bracket and about 6 months it stop working. I was JUST about to order a new one then I thought to look up "reset" and as soon as I seen the first 5 second I know this video will help. NOTE: DONT BE LIKE ME AND WATCH 5 SECOND OF IT THEN JUMP OUT THE BED AND RUN TO THE BIKE. WATCH TO THE END AND DO IT CORRECTLY 🤣🤣🤣 THANK YOU

@deanja92 5 жыл бұрын

Thanks for sharing. I have the same problem now, will be trying this fix soon. Btw, I dream of riding on roads like this. Spectacular view, not much traffic, nice bends and yeah, spectacular view. Wait,did I mention about the view already?

@chris.pbacon1811 4 жыл бұрын

Thank you!! I bought the generic Chinese version of this and the instructions were really bad. I couldn't get it in the programming mode. It said to do it 5 times. 6 worked 👍

@MarcuttiMarco 4 жыл бұрын

Hello try it with 5 times maybe not too fast. good luck Marco

@helioa.s.3288 2 жыл бұрын

Very good, I was only able to configure it on my bike because of this video. I am very grateful.

@adamhearn9368 4 ай бұрын

Super helpful, just reset my Health tech G1 Pro using your video. Thank you

@drago5935 4 жыл бұрын

Awesome! You saved me, thanks a lot! 🙏🏼

@MarcuttiMarco 4 жыл бұрын

Hi Drago Thanks a lot. nice that the vide helped you. greetings Thanks for the comment marco

@feafernandes 4 жыл бұрын

Thank you so much helped a lot!

@MarcuttiMarco 4 жыл бұрын

Hello Fabio, Thanks for your positive comment, had to make a video that helps you find otherwise no real instructions. Greetings marco

@inigomardaras9837 2 жыл бұрын

Muchas gracias por el video, ha sido de mucha ayuda

@MrM0rfi 2 ай бұрын

Thanks mate! 2024 and topic is still valid 🎉 😂

@franklin1003 2 жыл бұрын

Gracias, un vídeo muy necesario ✌️like

@run-aliens 2 жыл бұрын

This worked for me (6 times on & off) thanks for video it made my life easier 😀

@andresscriado9970 Жыл бұрын

Como lo hicistes tu?

@nicocaze3859 4 жыл бұрын

Merci tu m'as sauvé pour le RESET. j'ai débranché la fiche 6 fois 😜

@MarcuttiMarco 3 жыл бұрын

Merci beaucoup pour votre commentaire, heureux qu'il vous ait aidé. saluez Marco

@ZuninoDroneParapente 2 жыл бұрын

Muito obrigado, perfeito. Thanks very much, perfect!!!

@user-vb7sw2hv6v 2 жыл бұрын

Thanks very much Get my help!

@marcelobartikoski902 4 жыл бұрын

Me salvou aqui !!!! Love 🇺🇸 🇧🇷

@MarcuttiMarco 4 жыл бұрын

Salve marcelo Grazie mille per la risposta. Saluti marco 😀👍

@marcelobartikoski902 4 жыл бұрын

Marcutti Marco eu tá estava maluco 😜 mais seu vídeo me salvou!! Muito obrigado !!!!!!!!

@muhibbinasri6522 2 жыл бұрын

this video it so long time ago. thanks u, it work nice when i try again n again. tq bro video. im give up, but when i go out my home. i try do like under count indicator. it work very nice to go L. thanks

@vipermike9002 4 жыл бұрын

Thanks very much. I'm Thai. CBR500R Thanks

@MarcuttiMarco 4 жыл бұрын

Hi Mike Thanks for watch. Greats marco

@jortiz9758 4 жыл бұрын

Best fucking thing ever...Thank you so much.!!! I was on the street trying to keep up with traffic tryin to program and it wouldn't work. I noticed you were just barely above idle and I did the same. I just reset it on a lonely long road and took off ....went slowly and it worked for all the gears exactly as yours. Boom!

@MarcuttiMarco 4 жыл бұрын

Hello Thank you for your info and experience with my video. I'm proud that you were able to program in this way, because there are not enough good videos in the youtube network for programming. mega boom for the result. greetings from switzerland marco

@Ugaux 2 жыл бұрын

Hi mate, thank for your video. I have got one question : In reality, do you see the 8 figure of the leds like on the pictures of the product ? On your video it seams sometimes hard to see the number !

@bearrabbitchanneladventure1301 3 жыл бұрын

Does engine button has to be on the off position?

@fasin8me1 2 жыл бұрын

Does the indicator works with reverse shifting?

@JURARJ 4 жыл бұрын

hi friend, the gear indicator programs itself every 10s or according to the distance walked *** .... thank you

@MarcuttiMarco 4 жыл бұрын

Hi JURA Yes, after about 10 seconds she will program the gear herself. is also possible for short distances. it is important to use the correct gear when the gear indicator is flashing. I have made another video about the gear indicator: kzfaq.info/get/bejne/sNZ6fK-J3afQd4U.html greetings from switzerland marco

@SeparuhNafasku 3 жыл бұрын

Hi. Thanks for the video... Initially, my indicator only shows 0, 1 and stuck at 1 when I changed to higher gears. With your video, I managed to make it work but the "0" (Neutral) now become "-". Do you know how to change "- to "0"? Note:... I have 2 indicators in different motorcycle... Both problems initially happened when there was a clutch slip in high RPM due to mis-setting of clutch cable. Then it showed only 0 and 1 Both have.same issue...

@MarcuttiMarco 3 жыл бұрын

No, I don't know this problem, but it is important that the gear indicator works now. greetings marco

@paulinenash783 5 жыл бұрын

I have a question I live in the city so I don't have a road like that and yes we have highways but I am not fond of them so that option is out but in your video it looks like your going slow or are you doing 60 on gear 6 I am not a speed demon lol because I bought the healtech about a year ago and nobody wants to mess with it they tell me it takes to long to set up

@paulinenash783 5 жыл бұрын

An update on mine I had my friend take my bike on the highway and now my healtech is working but we did have to unplug it and plug it back in to get it to restart from the beginning we tried the turning of the key but it didn't want to start from the beginning

@AbDeep07 5 жыл бұрын

What do you do when the gear indicator goes upside down? I’m having that issue

@MarcuttiMarco 5 жыл бұрын

What do you mean by that exactly? I would do a reset and reprogram everything. watch this video. Gear RESET. kzfaq.info/get/bejne/ht6caaml37WspqM.html Thanks Marco

@rafaelaquino2872 5 жыл бұрын

Hi, Marcutti Marco. Could you help me with this problem and I want to know why the indicator has a delay when I change the speed?

@MarcuttiMarco 5 жыл бұрын

Yes very funny with us it runs wonderfully. try a reset and re-program the gear display, I have a video for programming in youtube. much success marco

@rafaelaquino2872 5 жыл бұрын

Yes, send me the video. I will be grateful for your help.

@MarcuttiMarco 5 жыл бұрын

Hi Rafael Hier the Video; kzfaq.info/get/bejne/ht6caaml37WspqM.html and :: kzfaq.info/get/bejne/eZhkp6iIps7MgKM.html Thanks marco

@andreabognar-cudar3142 3 жыл бұрын

Hi Marco, I have the same problem, I checked your video and I am at stage L is flashing. Then I start riding and above 3000 rpm the 1 is flashing, so that is OK. But I tried several time to reach the 2nd gear but no success. I tried slowly, between 3-4000 rpm. I tried hard, pulling till 7000 rpm, nothing. That O sign in your vide didn't appear after the flashing 1. Do you have any idea what can be the problem?

@MarcuttiMarco 3 жыл бұрын

Hello Andrea You have to be in the first gear until the 1 stops blinking, a ( n ) appears briefly and then put the 2 gear in until it stops blinking. you must try more times from time to time. try it. Check the plug if all pins make correct contact. it is difficult to judge it from here. good luck marco

@andreabognar-cudar3142 3 жыл бұрын

Marcutti Marco thanks I will try again. The problem is blinking doesn’t stop and n did not appear. But maybe rpm was not correct.

@MarcuttiMarco 3 жыл бұрын

Hello @@andreabognar-cudar3142 yes, try a reset again, greetings marco

@ksieciunio18 3 жыл бұрын

@@andreabognar-cudar3142 I have the same problem. Did you fix it?

@user-jc3rv5st3m 5 жыл бұрын

well , i fail reprogram my gear indicator I have repeat turn on and off more than 20 times, and it is still not reprogrammed I have 6 speed transmmission , and I fail program the indicator to 5th( I cant find a straight road to do it, traffic lights) I try unplug the plug from battery but the program is still remaining need help

@MarcuttiMarco 5 жыл бұрын

Hallo, Drive slowly at 20-35 km/h and so you can also program the display it doesn't have to be driven fast, try again sorry for the late answer was still on holiday. greetings from switzerland marco

@9108160469 4 жыл бұрын

Hello I bought the same indicator but learn the 3rd gear wrongly, so it shows 4 gear while I ride with 3. After 5-6 turn on and turn of it doesn't show L mode. How can I learn it again from beginning? Thanks in advance!

@MarcuttiMarco 4 жыл бұрын

Hello You have to do it like in the video maybe with 5 or 6 times up to the reset and then when it shows L again don't drive too fast constantly straight out. try it every module is different for the reset. marco

@9108160469 4 жыл бұрын

@@MarcuttiMarco I did it absolutely the same way like in the video, but it doesn't return to L mode, so I can not reset it. Is there another way to fix it? Thanks!

@ElationProductions 11 ай бұрын

@@akta01 Yeah I've got the same problem resetting one of these too. Tried with the key, tried using the engine kill switch which also kills the gauge, and even directly at the plug. Simply refused to reset, and I'm thinking these are just cheap, defective units.

@jorgecalle5603 4 жыл бұрын

Could you show me how to program this control indicator on my motorcycle

@MarcuttiMarco 4 жыл бұрын

Hallo Jorge Have you watched this video? have you bought everything yet? What kind of bike do you have. greetings marco here the one on the left. kzfaq.info/get/bejne/ht6caaml37WspqM.html

@kvmods Жыл бұрын

Mine will not reset after 6x the ignotion off and on and it only counts until 4 every time. Idk what i am doing wrong :(

@kvmods Жыл бұрын

@@akta01 i complained on ali expres and i did get a new one. Now my first display did show the correct gears only could not reset. I did not installed the new one yet. As long as i do not have to reset i will let the first one in operation.

@bodmargetts9423 4 жыл бұрын

Good camera what is it?

@MarcuttiMarco 4 жыл бұрын

Hi this is Gopro Hero 7 Thanks marco

@danielkoros7026 5 жыл бұрын

Hi I have a problem, i just bought one of these indicators i connected it, the very first time i started the engine it shown just an F! What should i do? I reconnected the cables and it still does that?! Pls help?!

@paulinenash783 5 жыл бұрын

Are you in neutral when you turn it on because mine said F when I am and then when your in 1st gear or start in first gear the number show up

@danielkoros7026 5 жыл бұрын

@@paulinenash783 hi yes i was in neutral, i manage to get it working by trying out all the combinations of the cables until i found the right one, then i just started the engine and it already knew the gears, didnt have to do the learning session , and it works fine since then

@paulinenash783 5 жыл бұрын

Glad you fix it

@jachkbro 4 жыл бұрын

@@danielkoros7026 what do you mean by "combinations of cables" what did you switch around to get it to work? Mines showing F after I get the L

@Szoki666 4 жыл бұрын

Hi man! I have the same issue, mine is counting and then showing F when I start in neutral. What do you mean by trying combinations? Rotating the cable in the plug? Pls help!

@TheArtchi 3 жыл бұрын

Hi, meiner blinkt beim starten das L schnell anschließend zeigt es mir die 1 an, aber es blinkt nur noch langsam anstatt so wie bei dir im Video schnell. Es bleibt langsam blinkend bei 1 stehen, statt N und auf 2 zu wechseln wegen anlernen. Was habe ich falsch gemacht ?

@MarcuttiMarco 3 жыл бұрын

Hallo Aslan Versuche den Reset nochmals und dan mit warmen motor langsam gleichmäsig fahren wie im video. man brauch machmal ein paar versuche. viel erfolg marco

@ksieciunio18 3 жыл бұрын

Ich habe das gleiche Problem. Hast du es repariert?

@TheArtchi 3 жыл бұрын

@@MarcuttiMarco ich werde es mal versuchen, bis jetzt leider kein Erfolg trotz Reset. Aber danke für die Rückmeldung. An der Verkabelung habe ich soweit nichts falsches gemacht..

@TheArtchi 3 жыл бұрын

@@ksieciunio18 leider besteht das Problem immer noch, Verkabelung ist ja kein Hexenwerk, verstehe es dennoch nicht woran es liegt.. Wenn's irgendwann mal klappen sollte, werde ich es dir Berichten

@crazyg3482 2 жыл бұрын

Hi. I have problem with mine indicator. I managed to reset it but cannot get it to work. It is showing letter L but upside down

@MarcuttiMarco 2 жыл бұрын

Yes L means you have to reprogram it. look at my video there I have an explanation. hope it works so. greetings marco

@MarcuttiMarco 2 жыл бұрын

kzfaq.info/get/bejne/eL2fjdSTtKjMpYk.html

@marinpopov7035 2 жыл бұрын

What is going when I have only 5 gears?

@MarcuttiMarco 2 жыл бұрын

Yes no problem 👍

@marinpopov7035 2 жыл бұрын

@@MarcuttiMarco What I have to do after 5th learning process completed?

@marinpopov7035 2 жыл бұрын

I followed the instructions and it worked out the first time. Thanks!

@marinpopov7035 2 жыл бұрын

After the fifth training process was over, I just continued driving without changing gears. "6" appeared on the display, but then returned to "5" and everything was OK.