Resin Colour Basics - what you can use to add color to your resin

Resin Colour Basics - what you can use to add color to your resin - Resin Tutorial

Рет қаралды 194,140

Күн бұрын

Resin Colour Basics - what you can use to add colour to your resin - Resin Tutorial. In this video I will be going through the most popular was of adding color to your resin, how to add different effects and what is available on the market.
Please be careful when using resin, it could be toxic and dangerous substance. Always read safety warnings on your resin and follow correct protective equipment that is recommended.
Resin Basics, list of content - Season 1
All these videos are available on day one on my Patreon account - link below.
1. Resin Basics which Resin should you choose - Resin Tutorial
( • Resin Basics which Res... )
2. How to mix resin correctly - Resin Tutorial
( • How to mix epoxy resin... )
3. Resin dyes, pigments, powders and more effects - Resin Tutorial
4. Moulds for resin casting, what to use - Resin Tutorial
5. DIY mould for resin casting from none stick HDPE plastic - Resin Tutorial
6. How to dry wood for casting or stabilization - Resin Tutorial
7. Wood Stabilization with Cactus Juice - Resin Tutorial
8. Stabilized wood dying, double dying - Resin Tutorial
9. Resin casting with pressure pot, best way to remove air bubbles from resin - Resin Tutorial
You can now support my channel via Patreon. If you feel my content adds value for you or its entertaining then help me continue to do so.
Any donations via Patreon are so much appreciated, you can find out more here: / casualdiy Thanks!
All my tools, woodworking accessories and video making kit is now in one place for you to check out. These are Amazon affiliate links. With a purchase through this link, you get an awesome tool and you will support my channel without spending a penny more.
Link to Amazon is just below! Thanks!
Tools I use and recommend:
www.amazon.co.uk/shop/casualdiy
Resins I use and recommend are on my Amazon store front - link above.
Also check out resin from ResinPro!
When shopping there you can use my personal promo code -10% off! Just type "casualdiy" code at checkout for your 10% off!
www.resinpro.eu
You can support my channel by dropping some change in the Casual DIY Tip Box. Thanks for your support!
www.paypal.me/CasualDIY
You can find me on:
Instagram - / casualdiy
Twitter - / casualdiy
Facebook - / casualdiy
Etsy - www.etsy.com/uk/shop/CasualDe...
Email - casualdiyuk@gmail.com
#casualdiy #woodworking #resintutorial

Пікірлер: 191

@CasualDIY 4 жыл бұрын

Don't forget to check out my other Resin Tutorial videos, here is some links: 1. Resin Basics which Resin should you choose - Resin Tutorial ( kzfaq.info/get/bejne/eKunmqeb1MClknk.html ) 2. How to mix resin correctly - Resin Tutorial ( kzfaq.info/get/bejne/gc58fsZ7x9LIgoU.html )

@ronandjoannsprague707 4 жыл бұрын

You probably will not even read this but the word spelled Mica is pronouced with a long "i" sound, not a short one. Please say it right.

@amandahartley9375 4 жыл бұрын

Ron and JoAnn Sprague did you think that maybe where he is from it’s pronounced differently?

@ivarolsen4218 2 жыл бұрын

ok thanks

@sammig.9770 4 жыл бұрын

This was very helpful. Thank you for taking the time to do it.

@CasualDIY 4 жыл бұрын

Thanks, got two more videos from my Resin Series, maybe they could be some interest to you as well. I've linked them in my pinned comment👍 thanks for checking out my video 😁

@da2585 3 жыл бұрын

Thank you for such a detailed tutorial. This was so helpful.

@CasualDIY 3 жыл бұрын

Thank you for watching 😁👍

@kimoanamusic8533 3 жыл бұрын

Your workshop is immaculate. Inspiring!

@CasualDIY 3 жыл бұрын

It wasn't always like that 🤣👍

@cilenebosch3806 3 жыл бұрын

Loved this. So glad I found you. Will be following.

@CasualDIY 3 жыл бұрын

Thank you kindly

@demiihenshall9504 4 жыл бұрын

They look great. Thanks for the tips. When trying to get your camera to focus try using a hand flat behind the mold so it doesn't have so much background to also compete with focusing. 😀

@CasualDIY 4 жыл бұрын

Thanks, yes the video making is an on going learning curve 😂

@secobaairways4585 Жыл бұрын

Top quality as usual, excellent!

@CasualDIY Жыл бұрын

Thank you kindly

@micksidaway 4 жыл бұрын

An excellent video/tutorial. 5 stars.

@CasualDIY 4 жыл бұрын

Thank you kindly. There are more videos about resin on my channel hope you enjoy them as well👍

@burgermaster4u2 3 жыл бұрын

Hi...firstly thank you so very Much for taking the time to explain and show the proceeders for casting and make-ing moulds. If it wasn’t for people like your self....who would know how.....🤔 I wonder...any was iv only just discovered your channel and that was by chance....so I haven’t see all..but I will I can a shore you. Iv only just started my adventure of mould making..started meaning I just purchased my vacuum pump.and chamber.iv also purchased my pressure paint pot and will be converting this to a resin pressure pot and I’m just awaiting my vibrating table...so I’m here now....trying to find out how to use it...and best of all iv just found someone-that truly knows how to use it....many thanks iv got this all to look forward to.....you...have more questions I’m sure from yours truly..to look forward to....lol.....thank you soooo much Dave..👍

@CasualDIY 3 жыл бұрын

Thank you so much for the kind words. Hope my videos will be of some help 👍😁

@joycemaureroriginal8563 3 жыл бұрын

Going to be trying making molds and making resin shapes for the first time. Had no idea I could use AI!!! Plenty of those and mica powders on hand so I have lots of ideas thank you!

@CasualDIY 3 жыл бұрын

Thank you for watching 👍

@Roxxylette4u 3 жыл бұрын

Thank you. Really needed this!

@CasualDIY 3 жыл бұрын

Thank you for watching 👍

@theduftmeister 2 жыл бұрын

lots of various examples. above and beyond a lot of other similar videos. thanks tomas.

@CasualDIY 2 жыл бұрын

Thank you kindly for watching 👍

@pampitt2545 4 жыл бұрын

Awesome video, Thank You!

@CasualDIY 4 жыл бұрын

Thank you for watching 😁👍

@pjshat Жыл бұрын

Another fun video! Thank you!

@CasualDIY Жыл бұрын

Thank you for watching 👍

@BenjeZOmbies 3 жыл бұрын

Great video very informative thanks

@CasualDIY 3 жыл бұрын

Thank you for watching 👍😁

@garypeoples9536 4 жыл бұрын

Great video! Well put together and very informative. Thank you!

@CasualDIY 4 жыл бұрын

Thank you so much for watching 👍

@dayrenstacey5406 2 жыл бұрын

Thank you for this! I was wondering why my resin was mixing unintentionally in my mold. I think it was because I made one color and the second one a while after. So the top color was made and immediately poured in. So I think it was mixing because of that. When I make both colors ready to pour at the same time I don’t have that issue.

@CasualDIY 2 жыл бұрын

Little things matter in resin casting 👍

@creatingpassions9897 3 жыл бұрын

Much Gratitude and Appreciation

@CasualDIY 3 жыл бұрын

Thank you for watching 👍

@peggyrosales9653 4 жыл бұрын

Great video, thank you

@CasualDIY 4 жыл бұрын

Thanks for watching 😁👍

@faithlove1894 3 жыл бұрын

Very helpful video 👍😊. Thank you somuch.

@CasualDIY 3 жыл бұрын

Thank you for watching

@mwills802 Жыл бұрын

Great video!! Thanks!!

@CasualDIY Жыл бұрын

Thank you for watching 👍

@jamesschwamberger7958 3 жыл бұрын

Thank you for the info.

@CasualDIY 3 жыл бұрын

Thank you for watching 👍

@leslietaylor8116 3 жыл бұрын

Cheers I learned a lot thanks for doi g this vid

@CasualDIY 3 жыл бұрын

Thank you for watching

@JakeThompson 4 жыл бұрын

Great Video Buddy!! 👍👍👍

@CasualDIY 4 жыл бұрын

Thanks mate👍 got few more in the pipeline 😁

@rommelphotography 2 жыл бұрын

Thanks!

@sajiniashana9931 3 жыл бұрын

Thankyou for the video what is more suitable for making resin jwellary and can we use fabric paints as an alternative

@CasualDIY 3 жыл бұрын

Hi, Any of the powders and pigments I presented in this video can be used to make jewellery. It all depends what effect you want to achieve. Not sure about fabric paints, never used them, but if they are water based then no. Resin does not react well with water and water based components.

@TheJewelryFantasy 4 жыл бұрын

You are the best! Like always Like!

@CasualDIY 4 жыл бұрын

Thank you kindly 😁👍

@bricofast 4 жыл бұрын

Thanks for the video 👌👌👌 a hug here from Portugal 🇵🇹🇵🇹🇵🇹

@CasualDIY 4 жыл бұрын

Thanks for stopping by and watching my video👍😁

@lilyrobinson-hill5783 3 жыл бұрын

Thanks for this! Just wondered how long you let the resin sit before you put the dye it in when it was separated? the blue and white one ?

@CasualDIY 3 жыл бұрын

The time will vary from what resin you are using and what condition you are working in ( temperature in your workshop etc.) To have a good colour separation you need to wait until you reach a certain temperature. Again that will vary from what resin you will be using so its a case of experimentation unfortunately.

@MrCed0802 3 жыл бұрын

Hello. I am willing to make a clock with wave effect. What would you suggest as pigments? A bit lost in all of these. Th aks a lot

@CasualDIY 3 жыл бұрын

I think ResinPro have got a whole kit for that. Check them out👍

@AnnasWorkshop 4 жыл бұрын

Love it !

@CasualDIY 4 жыл бұрын

Thank you kindly 👍😉

@jessicamitchell5244 3 жыл бұрын

What would be a good colorant to get an Opaque color comparison to glass cast in the US

@221b-Maker-Street Жыл бұрын

Try Let's Resin or Resin8 for pigments.

@meechie69Official 3 жыл бұрын

Helpful thanks ..however u sound like Juno Birch when u said “ absolutely stunning” and I’m living for it 😂

@salmanafzal4571 3 жыл бұрын

Dear sir I have 1 question if iam trying to make day and night wall clock we need only epoxy resin and pigment POWDER? can u plz tell me what we need to make a clock

@CasualDIY 3 жыл бұрын

Not sure what clock you are trying to make?

@dianasaur2131 4 жыл бұрын

Great video thanks. You have a very interesting accent.

@CasualDIY 4 жыл бұрын

Hehe thank you 👍😁

@Neonapi 2 жыл бұрын

I just ordered a mold for ear plugs!

@escape-n-paint5115 3 жыл бұрын

Thank you!

@CasualDIY 3 жыл бұрын

Thanks you for watching

@drjthornley 3 жыл бұрын

I need a big shed. Great video.

@CasualDIY 3 жыл бұрын

For resin work just a well wentilated room👍 Thanks for watching 👍

@radhikagrover2446 4 жыл бұрын

Hey! In this video you have talked about the dyes but then are these dyes acrylic paints or what ?

@CasualDIY 4 жыл бұрын

Hi they are special resin dyes. Check out this link to Alumilite dyes, there is a technical sheet you can read👍 houseofresin.co.uk/alumilite-dye-white-29-6ml-1fl-oz/

@theadvocatespodcast Жыл бұрын

I'm not sure but I think some amazing effects can be achieved.

@CasualDIY Жыл бұрын

You are absolutely correct

@sumosprojects 4 жыл бұрын

Gotta admit it comes up such unique colours mate, looks like you & your mate Jake Thompson are running a head to head shootout class on epoxy resin. Have you purchased the cheap eBay epoxy from China ?

@CasualDIY 4 жыл бұрын

Hehe yes you can get some cool effects. Hope Jake will come over for the Makers Central again next year. The resin I'm using its just the main stream. Don't want to risk it with the cheap Chinese one.

@mastermind1522 2 жыл бұрын

Love this video. Im just try and error for my own custom carbon fiber experiment.. in you opinion.. what can i use to give a little blue-smoke look..

@CasualDIY 2 жыл бұрын

Hehe difficult to suggest anything as we may be picturing the end result in two totally different ways🤣

@mastermind1522 2 жыл бұрын

Well yeah.. i got your point. 😓😓

@liletteautrey8481 2 жыл бұрын

I have about 12 different colour pigment from brusho , can you tell me please if I can use them with resin

@CasualDIY 2 жыл бұрын

If its water based then no.

@jetblast4356 Жыл бұрын

I watched your video. The one thing that I didn’t see in your video or anyone else’s is making TRANSPARENT colored resins. I am trying to recreate whiskey in a bottle with deep pour epoxy but everything I can find is translucent at best. Any suggestions?

@CasualDIY Жыл бұрын

It's a case of experimenting. Normal resin dye will be somewhat transparent if you only add a little bit. The more dye you add the less transparent it will be.

@gulnazfawad2946 3 жыл бұрын

U r teach very well 👌

@CasualDIY 3 жыл бұрын

Thank you for watching

@yakubvaid509 2 жыл бұрын

Thank you for amazing tutorial May I know for geode in black which is the best colour to use with resin to get good dark black thank you

@CasualDIY 2 жыл бұрын

If you want just a solid black with no extra effects then a normal black resin dye will do the job. I'm using dyes from resinpro.eu and they not failed me yet ( got a promo code for them if you want ) however most resin dyes will do just fine. One thing I would suggest is to experiment with quantity of the dye - if you add too little it may be transparent and I'm guessing you don't want that.

@yakubvaid509 2 жыл бұрын

What do you suggest about Amsterdam black acrylic paint

@CasualDIY 2 жыл бұрын

@@yakubvaid509 not used acrylic paints for resin

@clncaaquintero3595 3 жыл бұрын

I am just starting ,what mixture did you use for the resin and the formula you used?

@CasualDIY 3 жыл бұрын

Sorry not sure what you mean by mixture?

@chilkakanika1456 4 жыл бұрын

Are these acrylic dyes?

@ianmackinnon9916 4 жыл бұрын

Can you use water based paints as dyes for epoxy ?

@CasualDIY 4 жыл бұрын

I would not recommend it. Water/moisture and resin doesn't work well together

@Roknalnwader1 2 жыл бұрын

Hello brother, how can we make epoxy like bakelite hard and not affected by fire

@CasualDIY 2 жыл бұрын

Any resin essentially when cured will be similar on a way to plastic ie. If you put fire on it it will melt or even catch fire. There are resins that are heat resistant but not fire resistant. There may be some other chemicals that you could coat your cured resin but I don't know of any, never had a need to use such a thing

@user-qw8ll5eb1p 4 жыл бұрын

I have lots of leftover Holi powder, which I believe is a mix of powder pigment and cornstarch. Does anyone know if this would work in resin? Thank you.

@CasualDIY 4 жыл бұрын

Never used not sure

@annasoucek416 4 жыл бұрын

Катя Фламинго omggreat idea,

@zareena.6615 3 жыл бұрын

I’m not a resin expert however I do know that cornstarch hardens in certain liquids. I would not be surprised if when being mixed with resin it would thicken

@deborahstilwell8631 3 жыл бұрын

Can u actually make the colorant look like drops in the mold itself?? Plz help

@CasualDIY 3 жыл бұрын

I think people use alcohol inks to get that look

@popanda3652 Жыл бұрын

Hello, I'm working on a project. A bit of a side hustle. Basically I'm etching and then filling in the etching with colored epoxy. What epoxy is the most durable in your experience? Something with just a teensy bit of give would be best since my products might have to deal with very slight material expansion. Plastic pieces that often get left in cars or in hot garages is what I'm etching.

@CasualDIY Жыл бұрын

Well when resin sets its like hard plastic. It will not shrink or expand. That's why for example if you are doing a resin table or any project with resin and wood the wood needs to be fully sealed otherwise as wood moves in seasons the bond between wood and resin may break. Now are you asking for a brand of epoxy or do you mean resin? As epoxy is a type of resin. You got for example polyester resin, polyurethane resin, epoxy resin, acrylic resin and so on.

@popanda3652 Жыл бұрын

@@CasualDIY I'm gonna say epoxy resin. It needs to be clear in small quantities and sandable to a polish. I've been using gorilla glue epoxy resin but In any sort of sizeable batch it heats up too much and changes the color. Also it gets hard pretty quick when I add color.

@CasualDIY Жыл бұрын

@@popanda3652 I would suggest you try the resin from resin Pro (links in the description of this video) and try the ones for 5cm pour

@popanda3652 Жыл бұрын

@@CasualDIY thank you thank you

@2809kean 3 жыл бұрын

What's the name of the powder that changes colour when they're exposed to heat?

@CasualDIY 3 жыл бұрын

As far as I remember they are called thermochromic pigments.

@Legitfya101 3 жыл бұрын

can this work with flexible resin as well?

@CasualDIY 3 жыл бұрын

What do you mean by flexible resin?

@artcraftroom00 3 жыл бұрын

Which color pigment did you used at 11:53?

@CasualDIY 3 жыл бұрын

It was blue resin dye opaque, I don't have it anymore as I used it all and can't remember the exact colour name or where I bought it from sorry.

@Duchess_of_Cadishead Жыл бұрын

Your accent is intriguing. It seems to have traces of Birmingham, Ireland and Dutch or South African.

@CasualDIY Жыл бұрын

Hehe I'm Polish 👍

@mattersofthehartbynat8815 Жыл бұрын

🤣 🤣

@jostinton2382 Жыл бұрын

I want to try this , I have bought a resin kit with colours as a beginning. Can you tell me if the hol in the pieces was drilled or part of the moulding? Great video thank you.

@CasualDIY Жыл бұрын

Could you leave me a time stamp please so I know what are you referring to👍

@jostinton2382 Жыл бұрын

Don’t know how to time stamp but I looked at this on 11 March 2023

@CasualDIY Жыл бұрын

@@jostinton2382 I meant which minute of my video 😅

@mattersofthehartbynat8815 Жыл бұрын

This is the first of your videos that I have watched, and I’m only a couple of minutes in… but you have yourself a new subscriber! And this is based only the fact that you responded to a question that was asked just 9 days ago… considering that you uploaded this video 3 years ago, I find that totally amazing!! You gained my utmost respect… showing that you really care about your name and your watchers! Super well done to you!! 👏 👏 👏 ♥️♥️🇦🇺

@CasualDIY Жыл бұрын

@@mattersofthehartbynat8815 thank you kindly and welcome aboard, I do try to help as much as I can 👍

@JosephLorentzen 2 жыл бұрын

I wandered here wondering if dry tempera powder could be used.

@CasualDIY 2 жыл бұрын

Best way to find out is to try it out👍

@afriend8961 10 ай бұрын

Question for anyone with knowledge of this; would the half mix on the hexagonal mold have produced a perfect half color like when first poured? I'm looking to design something like this with two colors and I want to learn the best way to get as equal as possible halves of two colors. Thanks! =).

@CasualDIY 10 ай бұрын

By half, which direction are we talking about? Top and bottom or sides?

@afriend8961 10 ай бұрын

@@CasualDIY I'm going by your example at around 12:00 mark with the blue/white colors. If those colors can stay apart like that on both sides of the epoxy mold, I get what I'm looking to design. It's a football lamp for my fiance and she's a Packers fan (sadly). I want to design to halve colors of yellow/green and keep them from bleeding/mixing into each other for best results. =).

@CasualDIY 10 ай бұрын

Yes possible but achieving a perfect straight line will be extremely hard, in the end its a liquid. So before I started to stir both together that's what you could achieve - you just have to wait a bit until the resin is not so fluid anymore.

@ivarolsen4218 2 жыл бұрын

asking as a complete noob to this but what is the difference is effect from mica powders and deys

@CasualDIY 2 жыл бұрын

Dye will give you a solid colour, depending on how much dye you will add you may get different levels of transparency of the casting, or it may not be transparent at all. Mica Powders add colour and shimmering effect, you can make those swirls with them for some cool effects.

@viktorgeshka4572 3 жыл бұрын

Hi, is this similar to pearl material and which one is stronger or tough?

@CasualDIY 3 жыл бұрын

No sure which one you are referring to. You mean pearl powders ? The colours and different types of them or dyes will not influence how strong the resin will be. Unless you are doing a small project with small amount of resin and if you add way too much powder or dye it may not set correctly.

@viktorgeshka4572 3 жыл бұрын

I need like 2mm or 3mm thickness probably 2mm of the material, and I need it to be sturdy

@viktorgeshka4572 3 жыл бұрын

It's for an accordion right hand key, one of my key chipped

@CasualDIY 3 жыл бұрын

It will not be as strong as metal

@Rockysbeats 16 күн бұрын

cool but this is nothing like what im seeing with these fantastic river pours on etsy how are they getting such amazing results

@CasualDIY 16 күн бұрын

Deep pour with Mica Powders

@RexCapulet 2 жыл бұрын

Came for the tutorial. Stayed for the gorgeous accent.

@CasualDIY 2 жыл бұрын

Hehe thank you

@DuncanEdwards. 4 жыл бұрын

I've heard you can use some beauty products for colouring, don't know if it's true, just what I heard

@CasualDIY 4 жыл бұрын

Yes I heard that as well, also food dyes but not tried it myself. I think not all resins will work with those but it's worth experimenting 👍😁 that's why working with resin is so much fun 😁

@jennacoelho1548 4 жыл бұрын

I think your talking about Mica powder which is used for many eyeshadows and they use mica powder pigment for resin epoxy also

@srushxmusic 3 жыл бұрын

Can we use acrylic colors?

@CasualDIY 3 жыл бұрын

Depends on the resin. What ever you will be using the good rule is it may not have any moisture or be water based. Most resins don't react well with moisture

@shannontay552 3 жыл бұрын

Hi does it work with watercolour ink?

@CasualDIY 3 жыл бұрын

Anything water based will not work with resin as they are very sensitive when it comes to moisture

@aragureghian724 4 жыл бұрын

I noticed you got no bubbles... ah!ah!ah!... what resin were you using if you remember. [I did watch the warm water and stick magical trick... :-) ]

@CasualDIY 4 жыл бұрын

That was Alumilite, bit now I'm using a casting resin up to 2cm deep castings from ResinPro. Very good resin. There's a link to their website in description of this video. And a discount code👍

@aragureghian724 4 жыл бұрын

@@CasualDIY Thank you. I don't know if you realize the wealth of knowledge you are sharing allowing us to bypass all the learning yourself have gone through. That is huge! Of course we will make our own mistakes! But that is the fun of learning.

@CasualDIY 4 жыл бұрын

@@aragureghian724 I was hoping to put together a fairly comprehensive tutorial about resin basics as I couldn't really find one myself when I needed it.

@thelifeofanija 3 жыл бұрын

Should we be careful not to affect resin with colours, so it could cure well?

@CasualDIY 3 жыл бұрын

Hmm yes if you go way over board with the amount of dye or mica powders.

@221b-Maker-Street Жыл бұрын

No more than 10% colour to 90% resin, and you will be fine.

@berangbasanti 2 жыл бұрын

Can we add purple, blue and green together

@CasualDIY 2 жыл бұрын

You can mix whatever you want, it doesn't mean it will look good tho 😂

@berangbasanti 2 жыл бұрын

@@CasualDIY that's what i want to know that purple blue and green pearls, will this give same effect as chameleon pearls

@CasualDIY 2 жыл бұрын

@@berangbasanti hmm I don't think so. If you mix them they will just blend in and create a new color. But that's worth checking

@berangbasanti 2 жыл бұрын

@@CasualDIY thanks brother

@sagarlakhwani8356 2 жыл бұрын

How to get smokey effect?

@CasualDIY 2 жыл бұрын

Fill your mold with see through resin. Wait until it gets to about 75 degree's ( it all depends on what resin you are using) so the resin thickens a bit. Then with a tooth pick( for example) introduce another resin (the smoke) and just move the pick so you create the desired result

@sagarlakhwani8356 2 жыл бұрын

Can i have the link to the video?

@traceyleicester3875 4 жыл бұрын

where are you from?? i cant make out youre accent lol great vid

@CasualDIY 3 жыл бұрын

Hehe I'm Polish 👍😁

@dramabaazria5758 2 жыл бұрын

Can we mix acrylics with resin

@CasualDIY 2 жыл бұрын

What do you mean by acrylics, what products are you talking about exactly ?

@dramabaazria5758 2 жыл бұрын

@@CasualDIY acrylic paints

@CasualDIY 2 жыл бұрын

@@dramabaazria5758 yes, you can mix anything as long as it's not water based.

@Andyfred69 3 жыл бұрын

I can tell from your accent you are from Hungary and it is my favourite country I am from Egypt

@CasualDIY 3 жыл бұрын

Lol close, I'm from Poland 👍

@saintcake9165 3 жыл бұрын

Ahoj. Ty mluvíš český?

@CasualDIY 3 жыл бұрын

No I don't 🤣

@pizzagoblin7751 2 жыл бұрын

The green and yellowish one kinda looks like a bunny if you look real close

@gergerismail1574 3 жыл бұрын

Is the Resin epoxy?

@CasualDIY 3 жыл бұрын

There are many types of resin and epoxy is one of them

@shavewithdave5339 9 ай бұрын

Thanks for the video… just a tip… Mica is a silicate mineral and it’s pronounced “mike-a”, not “mick-a”.

@CasualDIY 9 ай бұрын

Hmm thank you, hope I will remember that for my next video 👍😁

@gladiusdei1847 4 жыл бұрын

Polish?

@CasualDIY 4 жыл бұрын

Yes😁

@ndungupeter6625 4 жыл бұрын

How can I remove the colourant in pineapple essence ,without making it Unconsumable

@lilyrye5651 3 жыл бұрын

Can someone just list all the names of pigments and stuff in this video on the comments lol

@devonswindell9735 2 жыл бұрын

Play at 1.25x

@zane003 2 жыл бұрын

starting minute 16:30 everything you put in front of the camera is too close for it to focus. I found myself unintentionally crossing my eyes

@CasualDIY 2 жыл бұрын

Sorry about that

@tjunkieu2b Жыл бұрын

4+ minutes into the video and I want to tell you to switch to a podcast format Amazing great fantastic effects and not a single image Franky, incredibly frustrating