Restoration/ Early 1980's Model Grass Trimmer Echo KIORITZ SRM-204DE Of Japan/ 2 Stroke Trimmer

Рет қаралды 417,881

3 жыл бұрын

For your consideration is a used Echo SRM-204DE. This is an early 1980's model which is built far better than anything. This engine still runs but will need the carburetor rebuilt or replaced.Feel free to ask any questions. Restoration/ Early 1980's Model Grass Trimmer Echo KIORITZ SRM-204DE Of Japan
.............................................................................
please enjoy with my videos and Don't forget Subscribe my Channel
-- / @ekrestoration
-- / @ekrestoration
............................................................
For this Multiple Share channel, I want to share my working experience to all people . how to restore old hand tools , old power tools and old engine with my skill working. more than this I will Assemble new tools like machine , power tools, engine and so on ..
................................
**Watch more videos on my Multiple Share channel:
++Restoration / Old Electric Chainsaw A-205 HIROSHIMA Japan / Chainsaw Rescue
-- • Restoration / Old Elec...
++Restoration/ Old Iseki Trimmer Kawasaki KT 12 /2 Stroke Engine 1970s
-- • Restoration/ Old Iseki...
++Restoration/ Old Rusty Hand-Held Circular Saw - Restore Concrete Cutter Machine
-- • Restoration/ Old Rusty...
++Restoration/ Early 1980's Model Grass Trimmer Echo KIORITZ SRM-204DE Of Japan/ 2 Stroke Trimmer
-- www.youtube.com/watch?v=VHh__eY5
++Restoration/ Mini Electric BLACK & DECKER U-124 Drill 1980 Restoration
-- • Restoration/ Mini Elec...
++Restoration/ Mini Water Pump Restoration /Water Pump KOSHIN LTD,SEG-25E of Japan / 2 Stroke Engine
-- • Restoration/ Mini Wate...
++Restoration/ Old Model Electric chainsaw Rescue/ Makita 5011B of Japan
-- • Restoration/ Old Model...
++Restoration/ Broken Handle Electric Drill Concrete Mixer Rescue/ TOSHIBA Cement Mixer of Japan
-- • Restoration/ Broken Ha...
++Restoration/ Antique Rusty Circular Saw Restoration | Electric Circular Rescue | Hitachi Of Japan
--www.youtube.com/watch?v=JLCn7...
++ Restoration/ Antique Rusty Circular Saw Restoration | Electric Circular Rescue | Hitachi Of Japan
-- • Restoration/ Antique R...
++Restoration/ Very Old Concrete Vibrator Restoration / Cement Vibrator Rescue / HAYASHI of Japan
-- • Restoration/ Very Old ...
++ Restoration/How to Restore Very old Electric Chainsaw /SHINKO Japan
-- • Restoration/How to Res...
++ Restoration/ Electric Screwdriver Drill/ Makita 6950 of Japan
__ • Restoration/ Electric ...
++ Restoration/ How to Restore Old Electric Drill with Silver and Gold Color / HITACHI Of Japan
__ • Restoration/ How to Re...
++ Restoration/ WOW how to restore Old Electric Angle Grinder/ Hitachi Japan
-- • Restoration/ Rust Elec...
++Restoration/ WOW how to restore Old Electric Angle Grinder/ Hitachi Japan
-- • Restoration/ Rust Elec...
++Restoration/ WOW Amazing how to restore Old Electric Grinder/ Hitachi Japan
-- • Restoration/ Rust Old ...
++Restoration/ WOW Amazing how to restore Old Electric Chainsaw/ SDK Japan
-- • Restoration/ Electric...
++ Restoration/ WOW Amazing how to restore Old Rusty Deadlocked Vise / try to save money
-- • Restoration/ perfect h...
++ How to Change Voltage From 100v to 200v Electric Hedge Trimmer HITACHI/ made in Japan
-- • Video
++ Perfect Rust USD Dollar Restoration/ How to Clean old rust US Dollar Money
-- • Perfect Rust USD Dolla...
++ Perfect Rust USD Dollar Restoration/ How to Clean old rust US Dollar Money
-- • Perfect Rust USD Dolla...
++ Restoration/ Wow Amazing how to restore old high pressure electric water pump, made in Japan
-- • Restoration/ how to r...
++ Restoration/ WOW Amazing how to restore Old Electric Bench Grinder/ try to save money
-- • Restoration/ WOW Amazi...
++ Restoration/ Amazing Fixing Chain Saw Oil Pump STIHL MS 382 and change sprocket Bearing
-- • Restoration/ Amazing F... .
............
++ PoPular Restoration Channel
- Multiple Share
- Max Tool Rescue
- Hand Tool Rescue
- Gear Show
- My Mechanics
- Restoration Scrap
- Screws And Tools
++ Multiple Share Work On
antique
Antique drill
antique tools
Antique restoration
Rusty Restoration
Antique
Antique Cleaver
butcher cleaver
Destroy Machine
Long Grass cutter
Lawn mover
cutting Grass machine
Machine
Machine Restoration
Old Lawn Mover
Old Grass Machine
Walking Tractor grass cut Machine
Power tools Restoration
...........
#Restoration #EKRestoration #PowertoolsFixing

Пікірлер: 255

@ekrestoration 3 жыл бұрын

Feel free to any questions of 2 stroke trimmer . Thanks for watching and don't forget subscribe my channel !

@GrumpyOldFart81 3 жыл бұрын

What chemical that fizzes did you use when cleaning most of the parts in the plastic container

@ekrestoration 3 жыл бұрын

@@GrumpyOldFart81 sorry for chemical name , I only know this stronger than soap and it reaction with aluminum .

@levisheets4519 3 жыл бұрын

@@GrumpyOldFart81 ++

@rafaelrivas2023 3 жыл бұрын

@@GrumpyOldFart81 x

@ayuayu5974 3 жыл бұрын

@@GrumpyOldFart81 fjdyvx

@bertg2864 3 жыл бұрын

You literally brought that back from junk. Great job. I do small engine repair. I have brought a lot back from the grave, but no total restoration.

@ekrestoration 3 жыл бұрын

Thanks 👍

@lisbethsiliezar6376 3 жыл бұрын

@@ekrestoration ffff

@latestplague3762 3 жыл бұрын

I've tore down and rebuilt several OLD trimmers myself, there's a lot of satisfaction when you first fire it up after all that hard work. I've never painted a cylinder (jug) however. I've sand blasted and polished them but never painted. Very nice video

@ekrestoration 3 жыл бұрын

yes, cylinder is very hot , so you should find kind of Paint that can be used with hot

@mattamick1163 3 жыл бұрын

Incredible,! Great job !

@ekrestoration 3 жыл бұрын

Thanks a lot!

@elmerbanta6269 3 жыл бұрын

Thank you for sharing your skilled how to restored grass cutter👍

@ekrestoration 3 жыл бұрын

Thanks for visiting us

@christopherbailie7607 3 жыл бұрын

great restoration. your attention to detail is wonderful 🤴

@ekrestoration 3 жыл бұрын

Thank you

@Brandon68plus1 2 жыл бұрын

People that can take apart something like this and know how to put it back together amaze me. I know I can’t. Amazing work.

@ekrestoration 2 жыл бұрын

Thank you my friend

@jonnysnipes3123 Жыл бұрын

I do it all the time, echo brand trimmers haven’t really changed at all

@EJ96746 Жыл бұрын

@@jonnysnipes3123 ever seen a rusted torx screw? pain in the ass especially if it hard to reach, wished echo never used torx on there equipment.

@DakxideOfficial 3 жыл бұрын

Beautiful you a so talent thanks for the good lesson you show me I'm from fiji island 😁👍

@ekrestoration 3 жыл бұрын

Thank you , and welcome

@salihefeceylan954 3 жыл бұрын

Thank you and velcome

@tetulosorby531 3 жыл бұрын

Bula

@davidroosa4561 3 жыл бұрын

nice job i really like that paint

@ekrestoration 3 жыл бұрын

Glad you like it

@joseantonio4901 3 жыл бұрын

Parabéns pela reliquia...

@ekrestoration 3 жыл бұрын

Thanks for comment

@GuadalupeHernandez-oy1dr 3 жыл бұрын

Excelente trabajo sabiduría e inteligencia

@ekrestoration 3 жыл бұрын

thank you

@AJPsWorkshop 3 жыл бұрын

Awesome job looks like new

@ekrestoration 3 жыл бұрын

Thank you

@amilcarmoncada1801 3 жыл бұрын

Excelente restauracion saludos desde Venezuela.

@ekrestoration 3 жыл бұрын

thank you

@ianvaldivia1993 3 жыл бұрын

Awesome restoration man!

@ekrestoration 3 жыл бұрын

Glad you enjoyed it

@sonyhk3824 3 жыл бұрын

Nice restoration. 👍

@ekrestoration 3 жыл бұрын

Thanks 👍

@ROADKILL4147 3 жыл бұрын

good job didnt think that there was that meny parts in that one :)

@ekrestoration 3 жыл бұрын

Thank you

@ThatRandomMan1 3 жыл бұрын

You actually pulled the bearing seals out for the crankcase GOOD JOB! You deserve a metal for that one lol

@ekrestoration 3 жыл бұрын

Thank you

@PERPARSON 3 жыл бұрын

yea its a 2 stroke and the crankbearings need to be open becouse they are lubed with fuel-premix.

@ThatRandomMan1 3 жыл бұрын

@@PERPARSON yeah i already knew that, that's why i made the comment

@berniewellcome1290 3 жыл бұрын

Outstanding.can pass for new.

@ekrestoration 3 жыл бұрын

Thank you

@tiptop1102 3 жыл бұрын

Very good job man. So strong

@ekrestoration 3 жыл бұрын

Thank you !!!

@RESTORATIONOFSCRAPMETAL 3 жыл бұрын

great job well done 👍

@ekrestoration 3 жыл бұрын

Thanks for the visit

@vitoni56 3 жыл бұрын

Wonderful, congratulations

@ekrestoration 3 жыл бұрын

Thank you so much 😀

@robertobezerra8376 3 жыл бұрын

Vocês são incríveis parabéns tmj.

@ekrestoration 3 жыл бұрын

thank you

@henrytauch8383 3 жыл бұрын

You are a professional sir

@ekrestoration 3 жыл бұрын

Thank you Sir

@Etiem666 3 жыл бұрын

Perfect!!!

@ekrestoration 3 жыл бұрын

Thank you

@bassamaljarrah3107 3 жыл бұрын

Very nice 👍

@ekrestoration 3 жыл бұрын

Thank you 👍

@pedrolandron4035 3 жыл бұрын

Quedo bello.Me gusto mucho.

@ekrestoration 3 жыл бұрын

Thank you

@andrewmantle7627 3 жыл бұрын

Echo really makes good stuff, especially for the money. I had one of these back in the eighties. It was built by Kioritz for Toro. It ran for twenty-five years and just got so ratty looking (still ran) that I gave it away. Still own a lot of Echo gear though. Thoughtfully designed and elegantly executed. Glad they went back to the orange color too.

@ekrestoration 3 жыл бұрын

thank you

@coopermuccio4409 2 жыл бұрын

wasn't it also built by shindaiwa? didn't kioritz and shindaiwa also merge to become yamabiko?

@kahlid-ataya 3 жыл бұрын

Another great video

@ekrestoration 3 жыл бұрын

Thanks again!

@kahlid-ataya 3 жыл бұрын

@@ekrestoration your welcome

@logansmith3434 3 жыл бұрын

Another job well done if you ask me

@ekrestoration 3 жыл бұрын

Thank you

@rvadventures 3 жыл бұрын

Awesome job! There's always that one. Lol

@ekrestoration 3 жыл бұрын

Thanks again!

@vandamnguyen3054 3 жыл бұрын

Very good mình thích clip của bạn

@ekrestoration 3 жыл бұрын

thank you

@reissantos5472 3 жыл бұрын

bom trabalho fez uma roçadeira

@javedwalage7290 3 жыл бұрын

Good job

@ekrestoration 3 жыл бұрын

Thanks

@nayasea3918 3 жыл бұрын

good job

@ekrestoration 3 жыл бұрын

Thanks

@Varietech-AU 3 жыл бұрын

Nice work, well done! Subs!

@ekrestoration 3 жыл бұрын

Thanks a lot!

@khomsinsin4585 3 жыл бұрын

Preface restore 😀😀 from Thailand

@ekrestoration 3 жыл бұрын

Oh I see you are Thai.

@eljtv9394 3 жыл бұрын

Saludos desde Paraguay

@ekrestoration 3 жыл бұрын

thanks for comment

@danlincoln8987 3 жыл бұрын

Bar none the best restoration channel out there no talking strictly to the point... Keep up the great work

@ekrestoration 3 жыл бұрын

Thank you

@zuraidisaleh1495 3 жыл бұрын

Good job bro i like👌👌👍👍

@ekrestoration 3 жыл бұрын

Thank you so much 😀

@mrodriguez5259 3 жыл бұрын

Increíble

@ekrestoration 3 жыл бұрын

Thank you

@ggmg9141 3 жыл бұрын

This is awesome. How come only 128k+ views?

@ekrestoration 3 жыл бұрын

My Channel still Small , Please Help share . Thank you

@bailsafe2017 3 жыл бұрын

Looks great! Just wish you would have kept the original green color 😜

@ekrestoration 3 жыл бұрын

Thank you and Thanks you advice

@Salem-F 3 жыл бұрын

Good

@ekrestoration 3 жыл бұрын

Thank you

@boonsongkroobaannok6850 3 жыл бұрын

สุดยอดเลยครับพี่

@ekrestoration 3 жыл бұрын

Thank you

@user-rs1990 3 жыл бұрын

There is a way to remove yellowing of the fuel tank and make it look new again!

@ekrestoration 3 жыл бұрын

Thank you

@tetulosorby531 3 жыл бұрын

How?

@esenkitapkrtasiye7608 3 жыл бұрын

It was a really nice repair.but a 40-year-old gas tank can crack.I wish you put a new one.

@ekrestoration 3 жыл бұрын

I already check it's tank plastic still quality

@latestplague3762 3 жыл бұрын

The Older tanks were definitely made better. As long as they didn't spend excessive amounts of time in the sun most of them last. I've reused many after cleaning up cause I like things to be original and I like the color better.

@simonev97 3 жыл бұрын

Kioritz ❤️ True made in japan

@ekrestoration 3 жыл бұрын

yes

@sharukhmatekuki5830 2 жыл бұрын

Nice 👍👍 🇮🇳 || Kuki

@ekrestoration 2 жыл бұрын

Thank you

@boss000786000 3 жыл бұрын

👍👍👍

@ekrestoration 3 жыл бұрын

Thanks

@mada658 3 жыл бұрын

you are a magician.well done,i have a rusty McMuculloch 270 and am afraid i wont remember how to put the parts back.what did you use for removing rust.vinegar?please help

@ekrestoration 3 жыл бұрын

If I have That Model, I will do it. Thanks

@random_dude_99 2 жыл бұрын

Use the parts list to help ypu remember how to put the parts back on

@Viktor.Gonchar 2 жыл бұрын

Самое главное в реставрации, это вода и краска😂

@ekrestoration Жыл бұрын

thanks

@chucksmoko5348 3 жыл бұрын

I have a sears trimmer that’s 90% the same as this unit. It has points though.

@ekrestoration 3 жыл бұрын

yes , the kind of very old model

@ronin7813 2 жыл бұрын

Bardzo dobra renowacja tylko nie dodawaj na początku filmu wstawek jak przedmiot jest już po remoncie, chodzi o to jak odpalacie silnik. Ponieważ spada chęć na dalszą część filmu. Pozdrawiam

@ekrestoration 2 жыл бұрын

Thanks for comments

@jozsefszabolcsjakab1656 3 жыл бұрын

🤜🤘👏👏👏👏👏👏👏👏Master jobs.👏👏👏👏👏👏👏👏🤘🤜

@ekrestoration 3 жыл бұрын

Thank you

@chriscreedo1068 2 жыл бұрын

Hello there EK, great video!! enjoyable and informative. I am wondering if you have any specs on a kioritz srm 501de? I acquired one in good condition today for a mere five dollars(nzd). The 501 is very similar to yours maybe a few years younger, very interested in knowing the cc's of engine etc... all in all a good example of a old trimmer built far more sturdy than those of today. Have a good day.

@ekrestoration 2 жыл бұрын

Thank you

@WanderingSawMan 3 жыл бұрын

I have not seen this type of brush cutter. What is the cubic capacity of this machine ? Nice work mate

@ekrestoration 3 жыл бұрын

This is the kind of small machine

@mansurzaidov4761 3 жыл бұрын

Мужик молочага 👍!

@ekrestoration 3 жыл бұрын

thanks for comment

@krismackbouch1844 2 жыл бұрын

Wouuuuu

@ekrestoration 2 жыл бұрын

Thanks

@baronkeithprevostjr6810 3 жыл бұрын

Hey I was watching one of your KZfaq videos and I see you fixed the 1980,s weed eater and also have you tried it out on the grass in your backyard ?

@ekrestoration 3 жыл бұрын

oh haha, sorry I don't have grass, so I cannot show cutting grass. This trimmer is strong enough for cutting , no problem

@user-co6wd8ni3x 3 жыл бұрын

@@ekrestoration воесиае

@angelgutierrezserrano980 3 жыл бұрын

Krac👍👍👍

@ekrestoration 3 жыл бұрын

thank you

@mparker7739 3 жыл бұрын

I still use my old school Tanaka TBC 4500 made in Japan definitely don't make things like they used to ✌️

@ekrestoration 3 жыл бұрын

Tanaka is still good too

@mparker7739 3 жыл бұрын

@@ekrestoration I was looking at some newer models earlier in the year they just look cheaply built for the price probably not made in Japan who knows

@ekrestoration 3 жыл бұрын

@@mparker7739 trimmer made in China now price lower than 100$. if made in Japan price is very high

@chriscraft9681 3 жыл бұрын

👍

@ekrestoration 3 жыл бұрын

Thanks

@rickr2029 Жыл бұрын

Questions. 1. Did you add a new piston ring and hone the cylinder? 2. Where besides Ebay are good places to find these old Echo trimmers? I know this sounds like an obvious question but it really is not. Because in the U.S. in the early 80's, and ALL time before, the homeowner took care of their own property and mowed, edged the lawn etc. So, the "lawn service" by a company was not popular yet. For homeowner use, this type of Echo unit was way more than a homeowner would later begin with using. Honestly, when the homeowners began using this new concept of a trimmer, weedeater, the popular (massively popular) was the Weedeater brand Green and Yellow unit. Sooo, back to the original question, it is perplexing to figure who the early units were targeted for to be able to seek one out. 3 Did you ever consider going back with original color? Thanks and anyone else want to chime in on the Trimmer evolution, I would love to hear their take on it.

@robertosaraiva6555 3 жыл бұрын

beleza

@ekrestoration 3 жыл бұрын

thank you

@supersquirrel379 3 жыл бұрын

where did you find replacement parts like carb kit and things I have one to fix?

@ekrestoration 3 жыл бұрын

Some Time I find similar part to replace , in this video I add part on Gearcase

@andrewmantle7627 3 жыл бұрын

@@ekrestoration You use too much grease. If you need to discuss this more, I am willing.

@josephquidlat5072 2 жыл бұрын

Sir Good day! ,1)how to Adjust Fuel & Air Mixture For better Response Or Proper Tune-up? 2)How many Full Turn & what Direction First Counter or Counter- Clockwise ?

@user-vp8ct3wb8o 3 жыл бұрын

It has become beautiful, but I think that the mixed gas is a little thin by adjusting the cab, why not try adjusting the gas at high speed operation? I enjoyed it till the end. Thank you.

@ekrestoration 3 жыл бұрын

Thank you

@mikespain8655 3 жыл бұрын

Everything excellent, except the trimmer head. Ditch that deeply one and get a spool feed head with bump line.

@ekrestoration 3 жыл бұрын

thanks for comment and give advice

@willarddunn9497 3 жыл бұрын

what the cleaner you used to clean up aluminum cases?

@ekrestoration 3 жыл бұрын

Normally I use water with soap , but in this video I add something stronger than soap ( I don't know in English called ) sorry brother . Thank you watching my video

@davetaylor8055 3 жыл бұрын

Man, that's a lot of parts.

@ekrestoration 3 жыл бұрын

yes sure

@tonisilva4204 2 жыл бұрын

👏👏👏👍🙋‍♂️

@ekrestoration 2 жыл бұрын

Thanks

@geraldleffronte8877 3 жыл бұрын

trump up for you my friend can you tell me the name of the solution you used at 11.35 please is very interesting good job don't forget to reply me thanks..

@ekrestoration 3 жыл бұрын

Thank for your comment , I cannot Know in English , sorry . my English is limited

@christophert5296 3 жыл бұрын

This is a dumb question but what is the thing with a bunch of things that look like lines on the thing that connects to the carborator what’s it called

@trungpham-yd1re 3 жыл бұрын

Nhìn cách làm biết bạn ở đâu luôn

@ekrestoration 3 жыл бұрын

Oh really !

@trungpham-yd1re 3 жыл бұрын

@@ekrestoration yes, northern viet nam, hay còn gọi là Bắc kì

@lucasgabrielpereira2613 3 жыл бұрын

Lucas 👍

@phonglang8135 3 жыл бұрын

VN bao h mới có công nghệ này nhỉ

@ekrestoration 3 жыл бұрын

I don't Know

@francestusias9863 2 жыл бұрын

Hi sir EK i have grass cutter SRMB253N my problem is the ignition coil,its hard to find here in the philippines,can you help me where to buy

@ekrestoration 2 жыл бұрын

This is old model ,in Here is difficult to find it's ignition too. Sometime I replace with different carburetor too

@ekrestoration 2 жыл бұрын

you can Subscribe my other Chanel ( Max Tool Rescue), when I fix machine i post in this channel

@josephquidlat5072 2 жыл бұрын

Sir Gudpm!When I use Special Gasoline w/ 95 Octane Rating in my 40.2 Cc 2-Stroke Brush cutter it's True it will Damages or Affect the Whole Performance of Engine?

@IronsharkGaming4747 2 жыл бұрын

How do remember were everything goes? I'm fixing one and I'm Half way through and already lost

@ekrestoration 2 жыл бұрын

I always repair Trimmer and chainsaw

@IronsharkGaming4747 2 жыл бұрын

@@ekrestoration so your used to it is what your saying?

@connerwhitton8982 2 жыл бұрын

what is the liquid that you put in the bowl?

@ekrestoration Жыл бұрын

sorry, I don't know in English

@user-dc9ck2qb9l 2 жыл бұрын

ใช้น้ำยาอะไรล้างเครื่องครับ

@darrenallen1387 2 жыл бұрын

Why did you take the seals out of the bearings before installing them

@ekrestoration 2 жыл бұрын

inside engine no use it

@phuongtran4064 3 жыл бұрын

Dung dịch ngâm đầu tiên có sủi bọt là gì vậy bạn

@Cactusj95 2 жыл бұрын

Where do you find parts for something that old

@ekrestoration 2 жыл бұрын

This every difficult find new parts, but some New Model similar to it

@josephquidlat5072 2 жыл бұрын

Sir,What is Recommended Oil Mixing Ratio Of 2-Stroke ? Because Ist mechanic Recommend 1Ltr Gasoline Mixed w/25 ml 2T-Oil & 2nd Mechanic says 1LtrGasoline Mixed w/50Ml 2T-Oil & 3rd Mechanic Recommend 1Ltr Gasoline Mixed w/10ML 2T-Oil.

@ekrestoration 2 жыл бұрын

mixing Depend on brand name of 2t oil you can see on The Bottle . some kind 1L Oil with 25L gasoline , some 1L with 30L gasoline and some 1L with 50L gasoline . if you not sure you can note that , there is smoke while working . if you engine made in China of copy engine you should mix much more than original engine .

@josephquidlat5072 2 жыл бұрын

@@ekrestoration thanks

@bennguyenvan7020 3 жыл бұрын

Qúa hay chỉ có ở vn

@ekrestoration 3 жыл бұрын

không ở việt nam

@bennguyenvan7020 3 жыл бұрын

Cho hỏi ở đâu vậy nhìn giống vn qúa

@hunghoangquoc2681 3 жыл бұрын

Sơn xịt đó thương hiệu gì vậy bạn

@ekrestoration 3 жыл бұрын

Please Not again

@marioscattone2530 3 жыл бұрын

👍👍👍👍👍👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏

@ekrestoration 3 жыл бұрын

Thank you

@oscaribanez3065 3 жыл бұрын

9 10

@rasikahemantha2897 2 жыл бұрын

Kioritz corp srm-204 fe

@ekrestoration 2 жыл бұрын

thank you

@zoltizolti3165 2 жыл бұрын

ECHO SRM- or hitachi or komathsuZenoah or shindawra or maruyama is robust very simple construction ????EK-REstoration

@boss000786000 3 жыл бұрын

Как часто нужно смазывать его вал???

@ekrestoration 3 жыл бұрын

thank you but I cannot read

@boss000786000 3 жыл бұрын

@@ekrestoration How often should the grease be applied to the mower shaft?

@bangto7647 3 жыл бұрын

Hay

@ekrestoration 3 жыл бұрын

@brantardrey7360 3 жыл бұрын

Only problem is as a retired mechanic that never had a large shop all my life and a lot of tools although I do have tools at this point in life I won't be getting anything major but if you're doing this on KZfaq and you're not burdened by debt or marriage or divorce or legal matters or child support and you have access to a garage or shop and you are making money all you have to do is buy the smallest sand blast cabinet and use light materials on the highest pressure with a medium size compressor and you don't have to wire wheel anything or wire brush anything and it comes out a lot better and a few things you can ask to dip to get the rust off so I would think that at this point somebody would be doing that?

@ekrestoration 3 жыл бұрын

thanks for comment

@Tittles-nv4vz 3 жыл бұрын

Why do u use washing powder to clean it less suds use dawn dish soap

@user-ny7cx4bw9k 3 жыл бұрын

คริบนี้ของคนไทยทำป่าวครับตอนลอกสีข้างกระป๋องมีภาษาไทยพ่นสีสเปรย์ยังมีภาษาไทย

@ekrestoration 3 жыл бұрын

Thanks for comment

@lanhnguyen8291 3 жыл бұрын

Bạn ngâm bằng hoá chất gì vậy

@ekrestoration 3 жыл бұрын

sorry, I don't know English

@joseiko1206 3 жыл бұрын

please restoracion engine kawasaki tg20

@ekrestoration 3 жыл бұрын

I will do Kawasaki brand . thank you

@joseiko1206 3 жыл бұрын

@@ekrestoration you're welcome bro when you see him restore with kawasaki tg20 engine

@taypat 3 жыл бұрын

Great content! But please put your channel / logo off to the bottom right side, and made it smaller, please. Quite distracting and a bit of an eye sore. Other than that, excellent video!

@ekrestoration 3 жыл бұрын

Thank you