Restoration of the Chrysler 218 Straight 6 Flathead Engine PART 1- ASMR

Рет қаралды 1,302,005

3 жыл бұрын

#flathead #restoration #asmr
I recently purchased a 1949 Plymouth Special Deluxe 4 door sedan known by its engineering code Model P-15. It’s engine needed everything and a machine shop would charge me easily $3,000 for all of the parts and machining. Enter: Facebook marketplace. I found a $200 dollar 1952 engine out of a Plymouth crab room for sale a few miles from home. The owner sent me a video of the engine rotating freely and I zoomed across town to get it. This video shows be prepping this engine for its first start. This video is part one of a two part series.
Check out Parts & Restoration on Instagram!
partsandrestoration

Пікірлер: 989

@marksettles6695 2 жыл бұрын

There's professional big budget you tubers screaming at this video about your methods. I'm 60 years old and have seen more engines rebuilt exactly like you're doing it than any other way. I watched my grandpa and uncles rebuild engines in the dirt at the oval tracks and win. Dude, I'm subscribing because of the no frills no bullshit practical way you do things. Great videos.

@partsandresto 2 жыл бұрын

Thanks Mark!!

@tomcosgrove3673 2 жыл бұрын

Point taken, I remember seeing an old guy in my neighborhood take a red brick and water, and a lot of patience, resurface a flywheel. It looked beautiful.

@johntripp2028 6 ай бұрын

This is not what you do if you want reliability and or performance. He gains no respect from me. I’m not a big budget mechanic and sometimes I have had to “make do” , but this is disgraceful.

@mrtechdeck500054 3 жыл бұрын

little tip I've learnt when it comes to gasket paper, tap it with a ball peen hammer when its placed on said object you need it for. Tap around the areas that need cutting out and it'll just sheer off. Great video man :)

@partsandresto 3 жыл бұрын

Great tip bud! Thanks!!

@jamesmorse8147 3 жыл бұрын

I rebuilt 3 or 4 of these, we used them for our irrigation pumps... solid old beasts.

@partsandresto 3 жыл бұрын

Indeed, nigh indestructible.

@jackmoorehead2036 2 жыл бұрын

Shades of my youth, we had a 53, Mayflower 2 door wagon, we pulled and rebuilt the engine in 59. I learned a lot from that. Including making gaskets and rebuilding carbs, starters and pumps. It is becoming a lost art of fixing components. Thank you for sharing this.

@Baldskul 3 жыл бұрын

Nice to see a guy fix things without all the fancy equipment, just ingenuity and hard work.....well done!

@partsandresto 3 жыл бұрын

Brother James, thank you sir!

@levivogel9029 3 жыл бұрын

It's good to see a real restoration.all of the parts are thoroughly cleaned. Keeping it as original as possible. Instead of cleaning the big parts and putting a whole bunch of new small parts on it.

@BillSeipel 3 жыл бұрын

There's a right tool for every job. He's got 'em.

@mickymaus2104 2 жыл бұрын

I Wish this time Chain would be in modern Cars....today the chains looks Like a bycicle Chain

@Baldskul 2 жыл бұрын

@@user-hv1ch5uc5d what difference does that make, I just like his ingenuity.

@robj2704 3 жыл бұрын

In my teens, I worked in my father's garage in the early 60's and learned a lot. Your engine is a good candidate. You're doing a good job. These were pretty low compression engines and the tolerances were not as critical back then as nowadays. Your engine should run just fine for years to come.

@partsandresto 3 жыл бұрын

Thanks rob!

@audi80b3samodelkin5 3 жыл бұрын

👍👍👍👍

@williambutler3269 7 ай бұрын

I'm inspired by this video! Half of the worth is that you don't interrupt the video with talking!😊😊

@markduncan6690 Жыл бұрын

Thankyou Sir for a “No Nonsense Teardown” No crazy monologue to listen to!

@oldtanker4860 3 жыл бұрын

Classic old school shade tree mechanic work there. Nice to see someone has the skill / knowledge to make their own gaskets. I learned that back n 69 working on my first car. Well done.

@NotSoCrazyNinja 3 жыл бұрын

Crusty... You know, I never really thought I'd watch a video like this, but it's quite nice and kind of soothing seeing someone restore something without all the yapping.

@partsandresto 3 жыл бұрын

The yapping ruins it...

@audi80b3samodelkin5 3 жыл бұрын

👍👍👍👍

@candlestyx8517 3 жыл бұрын

This is one of the things that irritates me about chrisfix, he never shuts up

@williamcleland9750 Жыл бұрын

Man I love your videos. I just retired from 40 years of medicine. Learned to drive in a 1947 Dodge four door fluid drive that I still own. I have dreamed of restoration but to date lacked a lot of time energy and know how. Now however I am inspired, thank you. WJDC

@ciscosservices8167 Жыл бұрын

Nice no fancy CNC machine no special order parts he rebuilt original parts he made his own gaskets he bore out the piston and cleaned everything with typical tools and did a great job thank you sir

@hitekrednek66 2 жыл бұрын

Dude...thank you for posting this vid! You obviously are gear head from way back and watching this vid and some of the old school tricks you did that I had totally forgotten...just took me back! I am a retired firefighter and noticed you were a truckie...thank you for your service as well! Stay safe sir!

@partsandresto 2 жыл бұрын

Haha. Glad you liked it brother. Mostly just making it up as I go. Make sure you watch part 2

@barnyardkh4 3 жыл бұрын

Just (4) words to add to a great project...."Pressure Washer" and "Safety Shoes"!!!

@partsandresto 3 жыл бұрын

Hahaha. Safety shoes are for communists and cowards!!! I do need a pressure washer though

@mrgremer357 3 жыл бұрын

@@partsandresto and a sandblasted!

@barnyardkh4 3 жыл бұрын

@@partsandresto I would suggest at least upgrading to close-toed shoes before pressure washing though. Stripping the skin off the top of your foot, while being non-conforming, would not feel good! Lol!!!

@wenskwensk7933 3 жыл бұрын

@@partsandresto just for first safety, i can see a blood in your finger 7:18 for not use a boots or simple shoes🤷‍♂️🤷‍♂️ Edit: i can see blood again in 7:25

@getoutmecar2940 3 жыл бұрын

Oh and a metal wire brush

@mmcshaffry 2 жыл бұрын

I swear every time I run into a snag on disassembling my flathead 6 I just watch your video and and BAM the solution is right there in front of me. Wish me luck - the manifolds are next....gulp.

@partsandresto 2 жыл бұрын

Good luck bud! Happy to help!

@MatthewSmith-to1hz 3 жыл бұрын

I love inline 6 engines. they may not make as many horseies a V motors, but the durablity and torque production is second to none.

@partsandresto 3 жыл бұрын

Without question. Thanks brother, we’re in agreement t

@MatthewSmith-to1hz 3 жыл бұрын

@@partsandresto awsome

@huntingboost8446 3 жыл бұрын

This is the type of videos we all love and no one can disagree

@partsandresto 3 жыл бұрын

Yupppppp thanks brother enjoy! Don’t miss part 2

@huntingboost8446 3 жыл бұрын

@@partsandresto I am watching all ur videos one by one don’t worry😂 Just keep like that brother!

@partsandresto 3 жыл бұрын

@@huntingboost8446 haha! Enjoy dude!

@757warbirds 3 жыл бұрын

claw hammer and kitchen sink this takes me back 55 years ago when my dad used to run modifieds 36 chevy coupe and build the engines in the kitchen as the garage had no door and a dirt floor

@partsandresto 3 жыл бұрын

Haha. I’m living it brother. My dining room table is covered in pistons and parts and my sink is full of grease

@raylarkin5004 3 жыл бұрын

Ditto Jt👍🏻

@albrighttopover 3 жыл бұрын

GREAT

@randallrice8727 Жыл бұрын

This is an amazingly helpful channel! Thanks for documenting all this. I am rebuilding a 50 Plymouth engine that was in my 49 Plymouth. Your videos are helping a lot! This is a legacy project. The car has been in our family for over 70 years. My grandad was a Mopar mechanic for 30 years (30 - 60). When he had to stop driving due to dementia, he handed the keys to me. I drove it in H.S., but then, sadly, I let it sit for too many years. I've been working on it for 30 years! My goal is a reveal in 2023. Thanks for your help!!!

@taraellis8279 Жыл бұрын

Ummm sooooo question? Are you going to post a video? Id love to see it! Im so sorry that your loved one had dementia.

@tevinabeysekera6038 3 жыл бұрын

If only Chrysler put this much dedication nowadays.

@gusgiesel 3 жыл бұрын

"Wrenching in flip-flops" A power washer would come in handy several times here. But I feel the old-school vibe going on here.

@audi80b3samodelkin5 3 жыл бұрын

👍👍👍👍

@mannym5692 3 жыл бұрын

Yap I would spray with degreaser first, wait for 15 minutes and give it unforgettable pressure wash But this is his project and he's deciding how and when to do it And we all have to respect that

@novanut1964 3 жыл бұрын

just like you, i spent hours hand cleaning my 1963 olds 215 aluminum v8, before completely rebuilding. good video.

@partsandresto 3 жыл бұрын

Thanks brother, Thant’s what it’s all about, I’m glad you enjoyed it!

@zjw3504 3 жыл бұрын

That what I love about cars from the 30s, 40s, and 50s, is alot of things are serviceable! Like water pumps, starters, fuel pumps! Great video!

@raadraad2887 3 жыл бұрын

I watched this video 3 times. Nice video, and this machine is very powerful, not like machines. Now we had a Dodge Plymouth Grandbrook, the same machine. The first car in which I learned to drive was a 1953 model and learned the mechanics. Thank you to the owner of the video who reminded me of my youth days when I was only 15 years old.

@partsandresto 3 жыл бұрын

You got it my good friend. Hope you watched part 2!!

@kamoboko86 3 жыл бұрын

There is nothing like watching a man work in sandals. So classy and not nerve-wracking at all. lol

@partsandresto 3 жыл бұрын

Hahaha. Get used to it, it’s the only way I roll

@jacquesfontein714 3 жыл бұрын

Me 2 and I'm restoring a Desoto Special Deluxe 1946 p15

@RedDFilm 3 жыл бұрын

Finally - a guy that cleans the engine before he works on it :)

@audi80b3samodelkin5 3 жыл бұрын

👍👍👍👍

@user-sh6tj3ch7c 3 жыл бұрын

@@audi80b3samodelkin5 شضششش

@WombatHide 3 жыл бұрын

I said that aloud to my wife. Crazy how many want to work in filth rather then a quick clean beforehand

@mattmccain8492 3 жыл бұрын

Nice. I rebuilt a 63 chevy 194 inline 6 like that in my backyard tool shed. Built it from the best parts from two engines and parts off a couple others. Been driving it everyday for the last decade.

@larrydunlop378 3 жыл бұрын

Your doing a Great job. To anyone who doesnt know anything about these motors.They are such a nice smooth running engine. They just purr. They had a hard time starting in the cold weather and running good on damp,rainy days. Switching them out to 12Volts is the key to making them start and run good. Thanks for the great video series!

@lexioncombine9403 3 жыл бұрын

I've been pulling wrenches over 30 years, never seen scotch tape used as a gasket template. Thanks for teaching an old dog a new trick.

@partsandresto 3 жыл бұрын

You got it!!

@chrismiller9948 3 жыл бұрын

Just wanted to say how much I appreciate a rebuild that goes for functionality over obsessive "restoration" that tries to make everything look new. My kind of guy.

@partsandresto 3 жыл бұрын

Thanks Chris! That’s it man. Get ur runnin and enjoy it

@toyotafan1234 2 жыл бұрын

I use to do engine restorations like this until I discovered brass and steel brush drill attachments. They make life so much easier!!!

@colinmartin9797 3 жыл бұрын

Most amazing part to me was that as a guy on a ladder company You didn't hit it with an axe or a sledgehammer even once. I didnt think you guys even knew how to use any other tools. Love from the aid car. ❤

@partsandresto 3 жыл бұрын

Hahahahahaha

@rudyduarte6160 3 жыл бұрын

Thank you friend,you'd brought nostalgic memories of my younger years,I remember those floating power little 216.One time we played starter races on first gear,and I can tell you those starters are mighty strong.

@partsandresto 3 жыл бұрын

Awesome Rudy, I’m glad you enjoyed it brother

@travispoppler8023 3 жыл бұрын

Even with time lapse you can tell there's a lot of work to this. Nice job.

@partsandresto 3 жыл бұрын

You said it Travis. Many weeks worth of work displayed here

@blevinsspeedandrestoration9451 3 жыл бұрын

Thank you for sharing! Nice to see a simple easy, not over the top super expensive restoration done

@TheDestinyends1975 3 жыл бұрын

I liked the way you restored the engine. We have a word " Machine does ,hand will be praised" But in your situation , hand did and the hand should be praised, welldone sir

@partsandresto 3 жыл бұрын

Thank you!!

@martint766 3 жыл бұрын

Those flip flops are killing me!

@partsandresto 3 жыл бұрын

deep breaths martin

@MrPiimpslap 3 жыл бұрын

especially with how much grease and grime you got on them, you should've put some gloves on them, lol

@michaelhill2844 3 жыл бұрын

I never knew the Munchkins made a few albums. Neat!

@leberwurst9397 2 жыл бұрын

So satisfying when you finally get everything clean and ready to go!!

@theophilusjackman6055 3 жыл бұрын

Great video. Helped satisfy some of my curiosity without tearing into my 230ci Flat Six. Thanks.

@mohitsharma9851 3 жыл бұрын

You guys are ACTUAL creator's who create content, and you specially a one man army I'm a new subscriber to your channel, I really appreciate all your hard work, thumbs up man.👍

@RicardoMartinez-kr5qk 3 жыл бұрын

So satisfying, you know he's legit cause he works in his flip flops

@raylarkin5004 3 жыл бұрын

Saw that.🤣🤣🤣

@peternewson2275 3 жыл бұрын

Those are tactical, OSHA approved flip flops. Can't find those at Walmart.

@audi80b3samodelkin5 3 жыл бұрын

👍👍👍👍

@audi80b3samodelkin5 3 жыл бұрын

👍👍👍👍

@pabloflores2870 3 жыл бұрын

Exactly what I was thinking, legit..

@Pointman-yf6or 3 жыл бұрын

Hey guys, I have this engine sitting in my barn. Spun the bearing on number two rod, and broke the piston. It’s all there including the transmission, clutch, pressure plate ect. It’s out of a 1949 Plymouth business coupe. Going to replace the rear end too, 4/56 gears. Put a 350 Chevy and trans in her. Oh yea, got split manifold exhaust and big carb with manifold like I said, just pulled it out and set it in the barn. Just watching you clean that one up makes mine look brand new. From what we can tell, broken rod bolt caused the damage. 56,000 miles. I would sell it.

@benphillips4423 3 жыл бұрын

Next time you try welding a nut on a twisted off bolt weld a washer to it first then weld a nut to the washer so you have more surface area welded.it will hold up better

@partsandresto 3 жыл бұрын

Thank you Ben, great tip

@lenBrill1971 3 жыл бұрын

scotch tape gasket template? I just learned something new!! Excellent vid, had me smiling the whole time👍🍻

@bighoss2028 3 жыл бұрын

Same here that is genius

@partsandresto 3 жыл бұрын

That makes me so happy. I’m glad you enjoyed it and learned something

@gordondick9100 3 жыл бұрын

I've made way too many gaskets the hard way, scotch tape from now on!

@bighoss2028 3 жыл бұрын

Absolutely love is and laughed a little to hard on that manifold removal 🤣 the WTF and stare was hilarious

@partsandresto 3 жыл бұрын

Hahaha

@philjerome9795 3 жыл бұрын

I have found that the big mortar mixing pans you can get at the Home Depot or Lowes are great for catching nasty grime, or whatever. When I'm done, I just wipe them out into a bag. Also good for dropping transmission pans, no spillage.

@brucestuart8180 8 ай бұрын

I had to stop in the middle of this video to say how awesome these videos are. I love the close up shots of everything and exactly how you break things down and clean it all up.

@robertschaap5342 3 жыл бұрын

Nice work! love seeing work on the old engines and not another LS motor. Love the sandals I do my best work in mine. I subscribed.

@partsandresto 3 жыл бұрын

Hahaha, my kind of man. Welcome aboard sir. Come visit on instagram

@lollo89806 3 жыл бұрын

You had my curiosity, now you have my subscription. Glad I stumbled upon your channel. Merry christmas from Finland!

@partsandresto 3 жыл бұрын

Welcome my friend. Merry Christmas to you as well

@KyleGreenhow 10 ай бұрын

this is a great video, so many of us "gear-heads" think about doing a project like this without really understanding what we are getting ourselves into, this video helps show me the reality of such a restoration, this is a huge project, kudos to you for doing it!

@cshaffadonk717 3 жыл бұрын

That lead pencil and scotch tape trick on the oil pump is an awesome idea!

@partsandresto 3 жыл бұрын

Thanks! got the idea from how cops lift fingerprints. Figured it would work and it did!

@1000yoeyoe 3 жыл бұрын

this man is chaotic with his ways, but I bet it always turns out to work lol

@partsandresto 3 жыл бұрын

Haha.that’s me Conor!

@joeschlotthauer840 3 жыл бұрын

9:30, precursor to the dilithium crystals...

@derp195 3 жыл бұрын

And here I am super impressed with myself for changing out my carb.

@partsandresto 3 жыл бұрын

Haha. You can do everything I did. I’m kinda dumb

@mikelafayette3421 2 жыл бұрын

I really admire the fact that you did this in your home shop but, wow, you caused yourself alot of work. And flip flops working in your shop...holy crap!

@legendarepa_0127 3 жыл бұрын

Почистил и мотор ожил , так не бывает. Димиксид в помощь и поршня новая отрастет

@kuvaldolet 3 жыл бұрын

на продажу пойдет😁

@user-bg6zf9bv2w 3 жыл бұрын

@@kuvaldolet этот двигатель от газа 52?

@kuvaldolet 3 жыл бұрын

@@user-bg6zf9bv2w нет

@279okiap 3 жыл бұрын

@@user-bg6zf9bv2w в Питтсбурге ГАЗ-52?

@user-bg6zf9bv2w 3 жыл бұрын

@@279okiap ну похожи очень

@trust_meim_a_lawyer5950 3 жыл бұрын

Wow, if my wife EVER found out I was cleaning car parts in the kitchen sink the punishment would be instant death :P

@partsandresto 3 жыл бұрын

Better to be single, sometimes

@petemarciano 3 жыл бұрын

In flip flops yet!

@alfreddill3251 Жыл бұрын

So absolutely INCREDIBLE!!!

@Peter-G. 9 ай бұрын

Thank you for this! 🔥 🔧

@chuckhaynes6458 3 жыл бұрын

Moving right along. You are doing the best you can with what you have. Did you mic the cylinders for taper? Good thing Chrysler made those great 6's for a zillion years. I had a 1933 and it was close to the same except for the water jacket. I still have one in an old welder I bought surplus. Keep up the great videos... I wanna go for a ride.

@joeschlotthauer840 3 жыл бұрын

*Put a teaspoon of septic tank cleaner in each of the freeze/core plug openings, and some in the water jackets...*

@partsandresto 3 жыл бұрын

Ooh good idea

@raylarkin5004 3 жыл бұрын

That was an easy watch. My dad did the same on a few old flat heads (I'm 66). I was reciting tools procedures and all the part I could see like the spring retainers.and compressors., freeze plugs, ridge reamer and servicing the water pump, the carb, starter fuel pump (all of which were my parts. all this was 100% shadetree. Great memories I eagerly await part 2.

@partsandresto 3 жыл бұрын

Glad you enjoyed it brother, just blipped the starter for the first time and she works, so with some luck the video will be done by the end of this week!

@raylarkin5004 3 жыл бұрын

Thanks. You are a work from a different time an ethic. Now, it all goes to the machine shop to be tanked to enameled. I am one of your biggest fans

@euroberto85 3 жыл бұрын

Manliest ASMR anyone could ask for

@raybin6873 3 жыл бұрын

Not so sure of the way the valve lapping was done - using a drill spinning in one direction only. Should use a hand valve lapping tool having suction cups on ends - dab lapping compound on valve - spin back and forth - lift reset at different position - spin again - repeat until valve /seat are resurfaced. At least that's te way I was taught how lap valves /seats. (40 years experience). 👍

@partsandresto 3 жыл бұрын

Yup, understood. I definitely did it wrong

@frankdavidson9675 2 жыл бұрын

you are correct that is the way i did mine it worked fine dont need drill

@redline3737 3 жыл бұрын

27:26 - Best Part

@robertlacob8831 11 ай бұрын

Love MOPARS! Great job back in the home garage!

@joshuaheath9003 3 жыл бұрын

Upgrade the 6 volt system to a 12 volt, use a gm one wire and voltage reducers where needed. That starter should take the 12 volts after a rebuild. It will make your life with that car much easier. Your flip flops would also make my dad proud, he used to weld in flip flops and get mad when he burned his toes.

@partsandresto 3 жыл бұрын

They are fabulous welding shoes, I can attest

@Ron36415 3 жыл бұрын

Nice, did the same thing with the one out of my power wagon a few years ago. if you'd like a little more power shaving about .060 off of the head, pertronix ignition and an edgy speed shop cam made mine a lot happier. also if your reusing the old oil pump the gears tend to chew up the cast cover, finding someone with a surface grinder to smooth out the cover will give you much better oil pressure

@hoost3056 3 жыл бұрын

Man, I would have dunked the whole lot into a hot vat of rust and grease remover and let it sit for a decade.....😂😂😂😂😂

@audi80b3samodelkin5 3 жыл бұрын

👍👍👍👍

@wesleycopeland3857 3 жыл бұрын

After sitting neglected for decades, another Deacde of neglective maintenence soaking should get that baby to fire right up.

@Falconurbex 2 жыл бұрын

Being a mechaninc myself i absalutly lv stuff like this, taking things apart and rebuilding them and seeing them work has they should do gives me a sence of great pride, so well done on this project, and thanks fot sharing, stay safr and see u in your next video.

@bassmith448bassist5 3 жыл бұрын

Very cool to see the heat riser valve in the exhaust manifold move freely. Every Chrysler six I've ever seen has been siezed.

@partsandresto 3 жыл бұрын

Oh no kidding. I guess I got lucky

@megadeuz6148 3 жыл бұрын

We had an old military welding machine that had a Chrysler flathead in it. That thing ran forever until one day we were using it and it made a very load bang out of the exhaust and never ran again. Now,this was many moons ago, so it's long gone by now.

@fordnut4914 3 жыл бұрын

When you use scotch tape with out taking it out the packaging thats gangsta.

@steveu842 3 жыл бұрын

This video is epic. I did the exact same thing 3 months ago on a 52 B3B and I would have killed for a video like this for reference. Well done sir.

@partsandresto 3 жыл бұрын

Thanks brother!

@Salty_Sparrow Жыл бұрын

This was very satisfying to watch. Definitely motivated me to clean and rebuild the engine of a 56 Dodge Royal I’m getting this week. Thanks man

@bobl78 3 жыл бұрын

cleaning the carb in the kitchen sink...the moment you know , she really loves you

@partsandresto 3 жыл бұрын

No she, just me

@alejonin 3 жыл бұрын

Oh gawd. Never lap valves with a drill.

@rossboyd2272 3 жыл бұрын

There aren’t many people like you , any more. I built my first engine at 11 3-1/2 hp brigs for a go kart I pieced together. At 13 I was working on my brothers friends cars . At 15 I built a 352 Ford truck that had a 300 six which I removed . I’ve painted I weld I do my own carpentry I’ve worked as a pipe fitter . I went through electrical training and college to be a machinist. When I said I paint that’s cars as well.

@paulwells4203 3 жыл бұрын

Subscribed. Interesting topic, no painfully witty talking, time lapsed the boring parts, the 30 minutes went by quickly and the video was very interesting. I had a 53 Belvedere in high school and laughed when I saw the old style emergency brake which grabs the driveshaft and the Ball and Ball one barrel carb. Nice work. (Nice looking garage too)

@partsandresto 3 жыл бұрын

Thanks Paul, welcome! Next video out hopefully next week. Glad you enjoyed it!!

@steventroglin5380 2 жыл бұрын

A What I just saw was amazing ! Dude, that engine never stud a chance against You! It was going to get a old fashioned rebuild, and by God you were going to do it ! You ant fancy but you are going to " get her done " . BTW I learned a lot.

@RoyZenzo 3 жыл бұрын

Eye of the tiger was one of the highest iq jokes

@partsandresto 3 жыл бұрын

That’s as smart as they come on here bub

@Sahkopekka200 3 жыл бұрын

The first 5 minutes of the video I in my mind i was just thinking about a power drill wire brush

@partsandresto 3 жыл бұрын

Could work, does work. Not on this one

@user-dn2tg2fj3i Жыл бұрын

no sé cuántas veces he visto éste trabajo, y aún me he imposible dejar de verlo!

@santosmercado7621 3 жыл бұрын

Finish your project and enjoy it. Forget the critics. We do it the same way in Puerto Rico.

@ejtakach 3 жыл бұрын

Good to see you doing some work rather than the talking head we see too often. Just saying (;-)

@partsandresto 3 жыл бұрын

Hahahaha.

@audi80b3samodelkin5 3 жыл бұрын

👍👍👍👍

@NORMOkPlay 3 жыл бұрын

Самый упоротый ремонт двигателя, последовательность ремонта отсутствует, цилиндры с раковинами, это что за типа хонинг дрелью сделанный, жаль двиган.

@gerdemon3331 3 жыл бұрын

Так это даже не ремонт, это "реставрация"! Ха-ха три раза. Если несчастный двигатель каким то чудом заведется после этого горе реставратора, то работать будет недолго.

@user-vr4tk8ug2m 3 жыл бұрын

а что реально можно так сделать хон руками или это мартышкин труд? мне летом предстоит капиталка и очень интересно узнать по этому поводу, бывают такие приспособы чтоб руками хон делать?

@faustofl 3 жыл бұрын

Uau!!! Total old school . Best regards here from São Paulo - Brazil

@Mopar-Pioneer 3 жыл бұрын

Sir , it is a Chrysler product, and a scarce one at that ! of Course it is worth restoring. n Well done sir !!!!!!!

@partsandresto 3 жыл бұрын

Thanks brother!

@kevindumais9610 3 жыл бұрын

Nice safety toe shoes you got there.

@partsandresto 3 жыл бұрын

Those aren’t safety shoes. Those are danger shoes

@georgechambless2719 3 жыл бұрын

12:25 The smartest thing in the video: you didn't do this on the kitchen table.

@partsandresto 3 жыл бұрын

Almost did tho!

@donalddoty5768 3 жыл бұрын

A buddy of mine had one of these in his 51 Plymouth. he lost a rod bearing on number 5 cylinder so he just pulled the piston and sawed of the top of the rod and bolted it back on the crank. He drove on 5 cylinders for at least a year. It got smoother after 35 mph.

@partsandresto 3 жыл бұрын

Haha, brilliant!