Nice video bro

Muy bueno su video,muy buena la restauración a la pobre máquina,usted le volvió a dar vida y a esmerarnos a nosotros,mis felicitaciones,saludos desde Argentina

Your mains plug hasn't got an earth connection. Dangerous... A fairly good restoration... 8/10

Estimado, el trabajo de restauración es muy bueno, pero debo hacerle una crítica que creo será constructiva: al principio del video usted muestra una secuencia; enchufa la ficha en el tomacorriente, prueba de encender el equipo, y a continuación sin mostrar la desconexión de la red eléctrica procede con una tijera sin aislante a cortar el cable, aqui le digo que usted al hacer éste video tiene que ser pedagogo y demostrar que coloca la seguridad por sobre todas las cosas, en el próximo que haga coloque la secuencia de la desconexión de la red eléctrica antes de cortar el cable de suministro, esto se difunde a nivel mundial y si llegara el caso de un accidente usted sería responsable por el simple hecho de omitir una simple secuencia de unos segundos, y además coloque al principio una indicación que diga que no haga lo que se verá en el video, ya que éste fue realizado por profesionales que asumieron todos los riesgos de las acciones que se realizaron. Ésta crítica va con toda la buena onda que tengo para enviarle.

My machinist heart is really happy with the work you did. Thank you for respecting that drill press.

ربي يسلمك ويحفضك على مجهودك الرائع اتمنه العرب يقمون نفس المجهود الرائع اللهم امين يارب العالمين والصلاة والسلام على سيدنا محمد وعلى آله وأصحابه أجمعين احسنت المزيد

You have done a great magnificent Job with a few tools Respect!

8 mins in everything laying out. Felt like home. Great job 👏👌👌👍👁️

A nice job . It should last a life time.

Came across this video by accident. I recently purchased this exact model of drill second hand without knowing anything about who made it. Your excellent restoration answered quite a few questions. Many thanks!

Exelente trabajo ,saludos desde PERÚ

الله وماشاءالله عاشت ايدك ايعينك الله يا مبدع

Always a delight and pleasure to watch you'se guys performing restoration projects. Another 100% successfully achieved.

Great job but why did you paint the main tube for the adjustable height tray? Shouldn’t that be clean steel oiled for ease in adjustments? It’s only going to get scraped up ever time you move it along with the surface of the tray. Also you didn’t break down the yoke for the chuck. There’s bearings inside of that too. It’ll be a bummer if they start rattling and squealing after it heats up from use. Never trust a bearing my friend unless you physically check it out😉 The paint came out really nice too👍🏼 thanks for taking us along

Muy excelente trabajo

Good job. You brought a dead and rusty junk of metal back to the life ... but your work deserved a glossy finish.

Aprecio muito esses trabalhos de restauração, parabéns acho muito triste se deixar um maquinário deixar se acabar dessa forma.ainda bem que existem pessoas que tem o capricho de restauradas obrigado.

Was nice if you sandblasted , than primer and painting. Use grease for bearings.

I have one similar... manufacturing date: 1992.. made in taiwan...very good job and very good machine

perfeito Eu admiro muito as pessoas que fazem esse trabalho

Buena restauración, solo faltó un poco de grasa .

Very good video . Great

When you were stripping it down I was really rooting for you and you didn't disappoint. Considering what you had to start with you’ve done an amazing job. You make a good team and as we don't know who does what it’s really well balanced. Hopefully your channel will grow so that besides the restored tools you’ll have you might be able to invest in some safer gear. I've subscribed, very well done it’s a job to be proud of.

I love the way it arrived.

really nice job. only thing i would say is the ground wire has installed over paint, but i really like how to reinstalled the name plates and labels

Главное занят, да и получается хорошо

THANK YOU...for sharing. Very nice.

well done

👍🏻👍🏻👍🏻👍🏻

Ладно. Эти хотя бы оправкой подшипники забивоют... Но зачем красить серебрянкой листы магнитопровода статора?! Они, по идее, должны быть изолированными, а тут наоборот. 😐

Para mi, una exelente restauracion quedo perfecto y funcional espero y aguante la soldadura por ser fierro colado esa seria mi unica duda👏👏👍👌

Abi birgün restore ettiğin eşyaların hepsini bir videoda çekip gösterebilir misin?🙏🙏🙏🙏

Good job

nice

Это не восстановление, это предпродажная подготовка хлама

Another tool for the work of restoration you are doing

Без обид, но это не реставрация, а издевательство... с движком вообще треш🤦‍♂️ Видно же что краска на ржавчине и местами отваливается в процесе сборки... тут только пескоструй в помощь! Так же как и старые болты, только замена! Так же как подшипники, только - замена! И т.д. .... ух перечислять можно до бесконечности, одним словом - жопа🤦‍♂️

Beautiful!!

Que chingones son 👏👏

Congratulation!

Muito bom meus parabéns 😎

Nice work!!!

9:50 das gepappse (minderwertige Schweißnaht ) hält nicht lange. Aber gute Arbeit die du mit all deinen Projekten machst, Hut ab. 9:50 các tông (mối hàn kém) không tồn tại lâu. Nhưng công việc tốt bạn làm với tất cả các dự án của bạn, mũ ra. 9:50 the cardboard (inferior weld) does not last long. But good work you do with all your projects, hats off.

Nem újat vesz, megjavítja azt ami adatik neki. Ez szép!

Muito bom 👍👍

Super tare

Wow, excellent restoration work......

Great man.....Thanks for video ....

Got same one ! Its great doing good work for me

You are a genius, then you are Moroccan

Well done 👍👍👍. It drills again. What more anybody want .Thanks for sharing

Did you really paint the pillar? Really? How did you expect it to work properly after doing that?

How does the chuck spline attach to the vertical screw sleeve? All the restorations I view don't seem to detach this and replace the bearings. Mine just falls out and other than a few damaged threads I can't see how it attaches. Thanks

У моего НС только станина весит больше чем этот станок в сборе.

Great work mate

Молодец!!!!!

just paint everywhere!! but the real restoration is missing! lasy work!

1:41 always a good idea to cut a live wire from a broken machine, it takes the machine and the human out of it´s missery...

Very good work but why you don't repair the angle of the base of the drill, it is broken and you hide it

You are amazing. I salute your courage. More grease to your elbow

Take a couple bucks and go buy u some grease.. it looked like everything was assembled dry..

I wonder if he unplugged the cord before cutting it...

É uma gama, modelo g2320 😬😬😬 Dependendo do vendedor, pois muitos mudam a marca kkkk.

Что это за сверлилка с толщиной стенки колонны в миллиметр??? У китайских современных станков и то толще.

Hello man you connected yellov-green cable to colored piece of machine. This solution is very bad you must connect it to clear metal because it is safety cable.

Well done, but without the painting🤔

Excelente amigo, felicidades... Tengo una duda, ¿que liquido químico utilizan comúnmente para remover el oxido y a pintura?

Meus parabem pela recomperasao você e bom

And you forget to put grease where it is necessary

Nicely done would like to give you good rod holder

👍 مهندس بارع .. من أين أنت؟

Can you tell me what that paint remover is?

Держак, это сила.😂😂😂😂😂😂.

I hope you are going to keep the drill to be used on other restoration projects because unless people are re-educated, giving the drill to someone else the same will just happen again. It will get used, then forgotten about, then neglected and then many years later another restorer will see it and do exactly the same as what you have just done.

Fico muito bom!!! Mas tive a impressão que a rotação estava invertida

Maneirissimo

Que medida de banda lleva en las poleas

It’s called a bench top drill press

Top 👌

Nice job! Congratulations from Brazil!

You always do a outstanding job ,thanks for the videos

The pillar is too thin and pitted to use. It would make a far better job to replace it with a suitable lengrh of tube.

what a great job, congrats!

Nice

9:31 сварщик от бога))) ну кто так варит толстое железо... Слов нет

I would like to have a drill of that

Tira o fundo musical deixa o vídeo normal

What id the spindle style on this one as well what are the bearing sizes?

А я ждал как они будут мотор в воде мыть

Awesome :)

Muito bom trabalho..o que é isso que você faz com os parafusos no fogo em 13:48?

The original color was hammertone green (research). It would be nice to keep the original color in the future videos.

И зачем востанавливать китайский ширпотреб??? Если с новья бьет пиноль гнется станина... таким станкам место на помойке

I like it better with red colour.

Нуууу скоооолько можно гайку откручивать?

En chanclas y haces maravillas

ESO ESTA GIRANDO AL REVES

de seguro les sobraron piezas falto pomer el tope de la palanca en lado izquierdo

сверление производится на 400-500 в мин

Magnifique restauration (sauf qua : 18 " 35 le mandrin tourne a Gauche ) et que pour percer ce foret acier est affuter a droite .Sinon beau travail