Vintage Stanley Saw Set Restoration

Рет қаралды 72,840

4 жыл бұрын

I was restoring a saw (future video) and I realized I needed a saw set to properly set the teeth. I checked eBay for a saw set and found this gem of a hunk of rust. It seemed like a great restoration video opportunity so I decided to restore it before I finished sharpening and setting the teeth on the rip cut saw I was restoring.
Keep an eye out for that rip cut hand saw restoration video which will probably come out next Friday.
Instagram: restoration.station
Facebook: Restoration.Station.FB
TikTok: tiktok.com/@restostaysh
____________________________________________________________________________________________
Products used in video:
Evapo Rust Rust Remover: amzn.to/2EjmlTD
Spray Max 2k Primer: amzn.to/35cZ69P
Spray Max 1k Trim Black Spray Paint: amzn.to/2JeskNe
Abrasive polishing wheel set: amzn.to/34K7XPl

Пікірлер: 49

@hotaruishere2133 4 жыл бұрын

I just realized a ton of the viewers of this channel seem to be middle aged men. I'm a 20 year old female college student 😂😂😂 what is wrong with me??? Lol! I just love to see these things get cleaned, like when you sandblast them or use various fluids to be able to just wipe off the rust and grime of the ages. It's also really fun to watch, because I like to believe that once the tool is restored to its former glory, it's like I get to see what it actually looked like or could've looked like back when the product first came out. it's awesome!! And SO satisfying.

@davidcox2264 4 жыл бұрын

Nothing wrong with that.

@mouser6e 4 жыл бұрын

Im only 11 I've watched almost half of these videos

@johnbesharian9965 3 жыл бұрын

"20 year old college student", eh? In four months I'll be 80 and I enjoy learning the "How-To's" and the "Why-For's" just as much as you seem to. There's another advantage to learning these things; relearning the pleasures of working wood without filling the air in your shop with clouds of sawdust and decibels of noise. Suddenly you can listen to the whispering wood telling you if you're working it with or against the grain. Yes, you can feel it as well.

@philanna38 4 жыл бұрын

After my husband passed I found one of these in his tool box but never knew what it was used for. Well now I know. Thanks for showing how to use it. I'm going to try it on the many hand saws he had. Nice restore.

@dr.skipkazarian5556 4 жыл бұрын

One of the great things about your videos and craftsmanship is that you also provide a lot in the way of education regarding tools, their use, and methods of restoration. I very much appreciate that...thanks and best wishes for the holidays.

@GT_Racer347 2 жыл бұрын

Sweet 👍🏻 👍🏻

@RESTORATIONOFSCRAPMETAL 3 жыл бұрын

Good restoration👍

@python357magnum100 11 ай бұрын

I got one of these from my late father’s tools, didn’t know what it was ( adjusting parts missing) now I know. 👍🏻 Nicely done.

@theropesofrenovation9352 4 жыл бұрын

Nice. I've never seen one of those. Good job!

@dallaswoiken7533 4 жыл бұрын

Very cool ,I have never seen anything like this tool .sweet find

@user-dx6pt9oo6h 4 жыл бұрын

Hi RS👋👋👋 a good and interesting tool 👌🏽 very good restoration 👍👍👍🔥💣

@matthewbrady5214 2 жыл бұрын

The paper has led on it, your supposed to rub it on the tool until it turns pink (if has lead) but if it doesn’t turn pink you can rub on the paper to confirm it is working. It’s so you don’t get a false negative.

@ronaldlapointe1219 4 жыл бұрын

Very good!

@metalartRestoration123 4 жыл бұрын

I did one of these a while ago cool little tool I didn't paint mine but the paint looks good nice work.👍

@davidcox2264 4 жыл бұрын

That is cool.

@terrytrostel6965 4 жыл бұрын

Cool i have been watching restoration videos

@MusicFurler 4 жыл бұрын

This is only used to set teeth after sharpening or to change the entire cut of saw. Also most modern saws have hardened teeth and are more tasking to set and sharpen.

@persioboni9373 4 жыл бұрын

Muito bom.

@tootall5559 4 жыл бұрын

I haven't seen one of those in many years.

@user-pn8wv2vr6j 4 жыл бұрын

Неплохое востановление , РАЗВОДКИ !!!

@wetdedstuocm 4 жыл бұрын

Well done.. A very useful tool, now all you need is a saw vise. Peace

@royreynolds108 4 жыл бұрын

I bought one of these in 1965 or 66. Have used it 2 or 3 times.

@Shnick 3 жыл бұрын

Roy Reynolds it’s like a bathtub drain wrench... once you use it, you’ll never use it again.

@planejet42 4 жыл бұрын

Sounds like your light really needs a new ballast. Or convert it to LED

@ROBird 4 жыл бұрын

Never knew that was a thing. Super cool, thanks for sharing

@judexavier1929 4 жыл бұрын

I supercool restoration, but I was hoping to get to read the inscription in the bottom of the handle.

@johnbesharian9965 3 жыл бұрын

The inscription, as you call it, inside of the fire engine red pull handle is stamped, "MADE IN U.S.A.". The rest of mine is dark blue. The tooth adjustment wheel at the front has stamped settings from 5 to 11 and the model is stamped as ND over the numbers 432. The left outside of the body opposite the spring has a sticker saying, "Stanley" w/yellow letters on a blue background and "Handyman" in yellow letters on a red background just below it.

@themendesmendes9712 4 жыл бұрын

👏👏👏👏👏👏👏

@nouf6208 3 жыл бұрын

lik 1000 😂🙋🌸

@hephaestusrestorations4885 4 жыл бұрын

Can I give you some advice next time before you apply primer make sure to send the metal very well because even though you sandblast it it it caused the metal to be raised in Byrd but you could see when you were applying the primer so do you aluminate that sandblast it and then send it my hand with like 600 to 300 to 1000 grit

@juliebaker6969 4 жыл бұрын

Why do you check the paint for lead? Does lead affect what stripper you can use? Or is it to take extra precautions not to be exposed to lead? If it's to prevent lead exposure, why not just treat ALL paint like it contains lead?

@mjbirdClavdivs 4 жыл бұрын

If you're going to sandblast, you can strip the paint at the same time. However, if the paint contains lead, you don't want any of the lead particles to be recycled into your blast media. So, you have to strip it first. You then sandblast to remove rust.

@juliebaker6969 4 жыл бұрын

@@mjbirdClavdivs that makes sense, I never considered that.

@paulorth2251 4 жыл бұрын

There's something you won't see in to many toolboxes.

@getyourkicksagain 4 жыл бұрын

Great job on the restoration, as always! Unfortunately, you are putting undue stress and wear on your ultrasonic cleaner by not filling the machine it to its rated capacity. The machine is designed and tuned to provide a maximum output with a full tank in the same way an antenna is tuned or matched to its load for maximum efficiency. When you use less liquid, the transducer(s) in the machine literally vibrate themselves to an early demise. The heating elements, if being used, also suffer from insufficient load.

@mred8002 4 жыл бұрын

Huh. Didn’t know that. Thanks

@trebronikum 4 жыл бұрын

Why is the lead check if he removes the paint anyway, regardless if it is contains lead or not?

@RestorationStation 4 жыл бұрын

If it doesn't have lead I would just skip the paint stripper and go straight into the sand blaster

@ianallen2 4 жыл бұрын

If he stripped the paint with sand blaster or just a wire wheel on a drill etc, it would put lead particles in the air and these can be inhaled. Stripping lead paint with paint stripper is wet stripping and clumps the particles together so it can be cleaned and dispensed of more easily without the lead getting airborn. Saved inhaling the lead and damaging lungs.

@trebronikum 4 жыл бұрын

@@RestorationStation Thanks for answer

@trebronikum 4 жыл бұрын

@@ianallen2 Thanks for answer, makes sense

@ianallen2 4 жыл бұрын

@@trebronikum Youre welcome. Glad to have helped you understand. :) Happy new year to you and your family.