Restoring a 20-Year-Old Pocket Trumpet

Рет қаралды 28,849

Күн бұрын

Restoration of a beaten-up twenty-something-year-old Bessons & Co. pocket trumpet. This little rascal arrived in pretty bad shape, but with a bit of elbow grease, and a lot of polish, I'm sure we can get it looking squeaky clean again! What do you reckon?

Пікірлер: 38

@YoliBuru 3 ай бұрын

Thanks for saving this beautiful instrument!

@derekflay5531 2 жыл бұрын

This instrument is at least 90 years old. I worked for the Besson Company - it closed when the name was taken over by B&H. in 1947. "Besson & Co" was a name used when the factory was in Euston Road London, prior to the 39/45 war. We never made these in my time.

@TinkerInTheShop 2 жыл бұрын

I'm afraid not, These are Indian made and are purposefully made and engraved "Bessons & Co" (With an S) to trick buyers into thinking they are the rarer original "Besson" pocket trumpets. They are nothing like the high quality of the original authentic Besson Instruments.

@derekflay5531 2 жыл бұрын

@@TinkerInTheShop thank you - Interesting - if I could have handled it I would have seen the "fake"

@TinkerInTheShop 2 жыл бұрын

@@derekflay5531 Absolutely. It's a shame as many people don't realise until they arrive on their doorstep.

@user-gi3mv4lk6c Ай бұрын

yea thats treu

@quadrumvirate86 Жыл бұрын

You can use scotch bright pads to clean / polish the inner slides. Works pretty well

@gib321 Жыл бұрын

Great project and story well told.

@GordonHudson 10 ай бұрын

As others have pointed out, these are fakes, but more importantly thats not a mouthpiece receiver. Its supposed to have a detachable leadpipe that fits into that oversized socket. This would have a cornet mouthpiece receiver on the other end.

@DonaldJPump24 2 ай бұрын

Im pretty sure your valves are misaligned. Unless there is a massive leak somewhere

@brad6742 Жыл бұрын

4:20 The Indian manufy forgot to drill out the hole for the water key lol. Congrats, you restored a new horn, which was faked to look aged. 16:00 Sounds like one of the pistons has an incompletely soldered passage way, hence the air leak. The grin at the end is priceless. Love the overall optimism, reminds me of current bull sentiment while buying dips in the market :) Surprisingly, some of the Indian euphoniums are not too bad as they copied 19th century English instruments. As always, play before you buy, or at least return when deceptive/defective.

@IAMeagle251 Жыл бұрын

If your valve caps won't open, you can always take a soft cloth and some pliers to it.

@tamasfoldesi2358 Жыл бұрын

Or a wooden mallet rather.

@sonlotus 2 жыл бұрын

Amaziiiiing

@RockStarOscarStern634 3 ай бұрын

Sax Son What a cute little Trumpet.

@RockStarOscarStern634 Жыл бұрын

Sax & Son I Love this Trumpet

@AlphaMachina 2 жыл бұрын

Man, it's beautiful!

@kaiiimee 6 ай бұрын

Hey, don't know when you will see this comment, but this video will surely help me a lot! I just got a pocket trumpet yesterday and an instrument "professional" told me it's for the wall or the trash. I'm determined to restore it! Could you tell me what kind of brushes those were and also what to look out for when restoring the trumpet?

@markosterman419 Ай бұрын

Am I hearing you correctly? You are saying it’s 20 years old but it looks much older based on the tarnish and engraving.

@RockStarOscarStern634 Жыл бұрын

Carol Brass makes these Trumpet

@coreymiggins2420 6 ай бұрын

Hey how you doing I got one just like this but no sound what should I do go a different mouth piece right now wind I blow in it no sound just air I need up

@coreymiggins2420 6 ай бұрын

I need help

@SaxSon 6 ай бұрын

Hello! Make sure the mouthpiece has a tight seal against the lead pipe, so there is no rattling or space. You'll also want to check that your valves are open - if they get stuck, you may have a blockage in one of your tubes. Hope that helps, but if not, you may want to get it checked out by a local tech. If you have this same pocket trumpet, though, you might want to consider getting a more modern and better-quality one, as you may end up spending more than it's worth on an overhaul. Good luck!

@antoine8730 Жыл бұрын

What are the product you use ?

@terrydoberstein6742 Жыл бұрын

Try Mothers Mag & Alum Polish on non lacquered metal. Just do not use in on the valves.

@user-ed4jb3in8p 10 ай бұрын

👍👍👍🎺🎺🎺

@romanchomenko2912 Жыл бұрын

What size and make the mouthpiece you were using for your pocket trumpet. I have a pocket trumpet and a Bugle can you use a trombone mouthpiece for your pocket trumpet or not .

@SaxSon Жыл бұрын

Hey Roman! Sorry I didn't reply sooner! For this project, I used a standard trumpet mouthpiece (I think it was a 3C). It was just a cheap one that I bought in bulk from Amazon for various things, such as this. Note that I did have to chop a couple of centimetres off the mouthpiece in order for it to fit. I know tenor/baritone horn and trombone mouthpieces have a much shorter barrel, so there is a reasonable chance they would fit in a pocket trumpet; however, whether or not they would produce a tuneful note is another issue! Hope this helps!

@PapaBearApproved Ай бұрын

@@SaxSon maybe you couldve used a cornet mouthpiece as their shank is smaller?

@richardhardy7818 5 күн бұрын

So, you have cleaned it, not restored it!

@m.m.7511 Жыл бұрын

Should use Tabasco sauce...

@douglehrer4385 2 жыл бұрын

These cornets are fake and are intended to deceive the buyer in thinking he or she has a real Besson. They play terrible and are not worth anything, even when they are restored. Recycle it as scrap brass.

@idk-ki8mn Жыл бұрын

They arent cornets lol, pocket trumpets are meant to be portable, i think originally for the military. They are worth it.

@twistedtrails8128 7 ай бұрын

@@idk-ki8mn LOL! not this one! HA! or any other india made knock off piece of shite!

@nef003 5 ай бұрын

This one sounds horrible. So much work for such a foul sound.. but it did turn out quite shiny and looks 😃