I love these vids. I watch them before bed as they send me to sleep. Your voice and the looped music are hypnotic, better than Tamazepam, thank you.

Bike rebuilds and service videos will now be my binge for the fall/winter season. Great video hopefully I can find somewhere to get my bike serviced with this much quality. Much love from canada!

Nothing like bringing A bike back to life😎

Never tire of watching your work.

I have the same wheels on my Cube SL Road SL and can confirm changing tubed tyres are a swine, esp at the side of the road!

🔥Art and science!🔥

I hope I can find this quality kind of bike service in my local bike shops.

Another bike clean as a whistle and all problems resolved

It's satisfying to see the before and after of the bikes . That's the best part of your videos. Keep up

this has been said before, but these videos are the best cycling content on KZfaq thanks!

Cracking, love a small bike they always look fast. It will go some now for a good service.

So nice! I wish I had a bikeshop that does such thorough service in my town!

9:54 Thanks for that tip. I need to do that now.

love the before and after on this, just shows what a difference a service makes.

I love your videos ! Huge fan since day 1... personally I would love to see you doing some bike related tutorials as kind of an alternative to your servicing videos. Greetings from Germany :)

Proud to be one of 1000 first subscribers!!🎉 even if sometimes i don’t comment,i am still watching every episode with pleasure❤!

another great job another happy customer

thats a rock soild bike every area needs an LBS like yall

This is the best bike maintenance video I've seen . A thorough service and clean, attention to detail is amazing. Where are you based? On a personal note, I'd be too ashamed to 1. Let my bike get in that state and 2. take it to a bike shop in that filthy state.

Excellent work as usual!

Loving this good stuff.

a pleasure to watch you at work such care and detail is a rarity in anything today

Like almost every Wednesday: greetings from my couch in Germany! Lovely cleaning/ servicing job on this bike, looks amazing!! Keep going with the good work here on KZfaq. Cheers!

smashing little bike; love that the owner's got 650b wheels on; just looks the business. 7000 series 105 is an amazing groupset too. Great job, as ever.

I need this done to my canyon ultimate!

Awesome Video!

Look at type of steel used in here no rust at all crazy

You know the sh*t is serious when copper grease is applied! Excellent!!

Sus clientes nunca limpian sus bicis, ni modo más trabajo para usted!! Saludos!!!

Havent you thought about doing some tutorial videos? Just as bar taping or setting the gears. I would be more than happy to see that, since i like to learn from a more experienced mechanic. Cheers

Marvel work!

looks like new, great looking bike.

Great service as always 👍

very informative. Thanks for the great video.

Beautiful bike. The owner seems to use the large chainring almost exclusively 💪. These videos have inspired me to buy/use an ultrasonic cleaner to feel more motivated to clean my friends' bikes and, thus, have regular riding buddies on the colder months. Thanks for the great videos!

Nice video bike speeds good work

Great service as usual. When it comes to tires that are hard to mount I recommend VAR tire lever set RP-42500. This lever set hooks the rim wall and the tire bead so you can mount any tire without a lot of struggle. I run Continental Gatorskins on most of my bikes and the VAR levers take the pain out of getting them off and on. I never ride anywhere without out them.

I want this service but I live in Austria :( Awesome job!

Lovely job. Been putting off cleaning my commuter for a couple of weeks. Saturday its getting done.

nice video i learned something new thanks for that 👍😀

Wow lovely cute bike amazing work lee and simon again fab work on cameras xx

Winter is coming in the UK dont think chain waxing will be done until next year maybe ;) knowing our climate anyway, awesome video as always been here since 300 subs :)

Awesome, love the finished transformation.

Very good workmanship I have a fairly new MTB and the chain just keeps coming off and the gears keep skipping plus the brakes always squeaking! I wish you could service it for me

Great work, wish your shop was closer to me.👍

putting a 25 tire on a 26mm external width rim is easy, a lot of rims now are 28-29 mm wide, my tires have deformed from taking them off and on because it takes so much force

When the notification pings life is good. Great vid, keep ‘em coming.

awesome job! 🎉❤

Love this vid y'all.

Your work and videos are terrific! Thanks

Awesome job

Amazing Job!!

Great video as always. Cool to see a bike that's very similar to mine in terms of parts. See you next week!

Once again ,amazing job .thank you for putting out the best content !

Beautiful bike!! Nice work!!

Great video!! Awesome job!!

I have noticed something that you didn't do which surprised me, you didn't remove the sticker from the rear brake rotor. Is there a reason? Also you have to know I have watched A LOT of your videos and this is the first time I've seen anything remotely suspect 🤣 I think it's important that people who aren't mechanically adept have a bike shop go over a direct to consumer bike like this Canyon. As always a relaxing and enjoyable video!

So refreshing to see a bike video without any Muc-Off products! Myself would not but any grease near the disc brakes. My opinion is also that copper paste would be banned from the cycle industry. Nice videos from you. PS. That is not a carbon fibre bike.

Absolute superb job on this Canyon. Yeah Schwarble tyres can be tight, very tight. Also you left the little orange sticker on the disc brakes, always get them off 😉 That’s a good point about the disc pad screws, I will check and grease mine this weekend before winter sets in 😎🇫🇮

Nice work 😊👍🏻👍🏻

Noice again!

Fantastic job!! You should be a watchmaker too... mm, are you? 😀

Waiting for a video on your watch collection

Great videos guys, keep up the good work✨✨

This bike was really easy to assemble kzfaq.infoUgkxMesz3KOGEmwmvyKQfLfrRSUXLFzfVHZA and required very few adjustments out of the box. The wheels did not require any truing/adjustments. The frame had some small scratches, but nothing major.I did replace the seat though - the seat it came with was very uncomfortable. The tires need to be re-inflated every 4-5 days, but this appears to be quite common for the narrow 700x25 tires.Overall, in my opinion, this bike looks and rides like a much more expensive bike.

Another excellent video lads 🤓

Excellent as ever! Could you specify the torque settings sometime when you go through? If they are common for example- thanks

surprised you didn't take the pedals off the crank

Great work, I am absolutely thrilled. I love it when people ride and use there bike for a long time and when the bike then also gets a proper service. I have sold my entire bike collection (except for one bad weather bike) in order to build my dream bike. This won't be a high-end €12,000 build how my colleagues do it, but simply an 2022 Allez Sprint frame combined with the "old" 105 R7000 and a set of Zipp 303 S. A simple aluminum race bike that you can ride for a very long time.

When you are changing shift cable looks like you are removing a screw at the top of the shifter. I've not seen that required before for 105 Shimano shifter? What screw is that? Also, how long did it take to perform the service in real time? Great video!

Outstanding service & nice video as always. I have purchased the chain checker and emery paper for the disc rotors :)

FIRST! Keep up the good work

Mate, da bloody vids are brilliant, please do go make da videos a bit longer.

🎉🎉🎉

The cable guide for the derailleur looked pretty funny in some positions. What's happening there?

Always look forward to your Wed video, relaxing and informative. Would you consider doing a 'normal time' how-to series on small jobs, ie adjusting v brakes after a wheel removal or how to change a chain? Cheers

Lovely job as always, but why leave those awful looking stickers on the brake rotors? Cheers 👍🏻

Lovely stuff - any recommendations for when the disc brake rotor bolt seizes? would like to avoid buying a new set of callipers...

I'm watching the perfect rebuild and all I can think is; he's gonna change the bar tape, surely, he's gonna. He's got to? WAIT??? He didn't change the bar tape!!!

👍

I've now purchased a Ribble but with though axles rather than quick release. Never had them before. Might be a pain on the side of the road than the QR system. Any advantage? Quality stuff as always guys.👍

Any tips on washing the bike indoors? How do you get water on the bike and not on the workbench being

Love your videos. In some of your videos you have used vinyl stickers for frame protection. What brand are they, such a good idea.

Great service Sir, out of curiosity, how much that service costs?

How come you don’t align the rear derailleur hanger in any of your videos? It’s a must before resetting limit screws and adjusting tension.

Why no more chain waxing? 🙃

always nice to see the before and after. One question: how long does this take for this rebuilds and service?

Relatively easy to assemble kzfaq.infoUgkxMesz3KOGEmwmvyKQfLfrRSUXLFzfVHZA (note that is does not come with tools, so please have a set of hex/Allen keys and Phillips screwdriver handy). The bike weighs 27 lbs fully assembled, which is not bad.A couple quirks about the bike:- left brake lever operates the front brake (something to get used to if controlling the front brake with your right hand is what you usually do)- Shimano thumb shifters for the gears are positioned close to the center. This is a bit of a nuisance because changing gears involved taking your weight from one hand to change gears, a hassle if you are regularly changing gears. However, gear shifters positioned at the drop bars are very expensive compared to thumb shifters, so I can understand, given the price of the bikeBike is otherwise of good quality. Gears change fairly smoothly and fit/assembly is of good quality. A totally competent product for the price.

👏🏻👏🏻👏🏻👏🏻👏🏻

Wednesday highlight again. Quick Q. Any recommendations for lubricant of road levers other than my usual squirt of spray lube once in a blue moon?

at the bikeshop I used to work at, we'd use a blowtorch on disc brakes to burn off the dirt - thoughts on this? we didn't apply the heat too long so the disc wouldn't warp

Cadre fitness

great video! what lubricants are you using?

The care you put into your work is clear and the work is done to a high standard. Out of interest, what did this service cost the customer?

What are the different types of grease used on the RD please? Two different types on the thru axle too?

@Bikespeeds Question on the Ceramic Spray - can this be used on clearcoat bike frames? I know you use the Autoglym resin polish on those but I own both matte and clear finish bikes and would like to avoid buying two if possible. Thanks.

Amazing video once again, but the rear disc brake rotor still has the little orange sticker on them (07:11), even after cleaning 😱. I'm calling the police...

could you give us an idea of how much this would roughly cost? thanks

what about the headset and bottom bracket?

Without distracting background music the video would better