This fire pit is one of a few covered pits that is on the list kzfaq.infoUgkxAU9pOCSV9Y5JprooHvfxTpOrt4hx8uRM of approved products for Disney Fort Wilderness. The product served its purpose well and provided excellent fires throughout the evening. We were able to open the door and do s'mores, but I had to be careful because the handle was a bit hot on occasions. Additionally, I wish they had replaced some of the standard nuts with lock nuts in some places. We lost the door handle after just a couple of days of usage. Not a deal breaker, just a recommendation. I still give it 5 stars.

I've been loving your channel and content! Found you through Bushradical

An old buddy of mine had a similar looking stove years ago. We cooked a lot of chili, venison and fried taters and brewed more pots of coffee than I can count on that thing. Nice job stove looks real nice!

I like to watch projects like this one. Keep ‘‘em coming!

Thank goodness. Couldn’t figure out why it didn’t have a floor! Something to look forward to. . . . And another lovely, peaceful cabin build. Thanks for a perfect afternoon!

This channel is growing fast. You’re doing a great job 👏

That is nice and sort of modern. ❤

Amazing work!! I love how these stoves with windows light the room.

That Red looks sooooo much better compared to the first red you decided to use. Thanks for the video!

Really nice color combo turned out great I'm sure she will enjoy it in her new cabin another great video people should check out thx for the upload Ryan Merry Christmas

The what not to do's are the most educational sometimes. Thanks for sharing the mistakes! I also agree, the second red looks way better!

That ending color was much better anyway. It's a nice looking stove!

Those are good tips to restore wood stoves. Merry Christmas 🎄⛄ to you and your family.

Great job Sir! Came out looking real nice. Merry Christmas to you & yours!

I've done a few like this. I'll tell ya get a small pot sand blaster. It takes cleaning from a few days of grinding and wire brushing to a few minutes.

That was AMAZING! Great job!👏🏻👏🏻👏🏻

WHOA! That is red. How cool that this can be done so easily.

I have a stove I am preparing to paint. Thanks for the tip on not using automotive paint. That’s what I was going to use.

Great video and beautiful result. Thanks for sharing the entire process.

Looks good, and for the price you really can't go wrong.

Merry Christmas to you and your family 🎄🎄🎁🎁🎄🎄😘👍🏻💕

I always like red. Thanks for sharing

Absolutely love that stove. I am looking for one!

Thanks for the information.

Wow automotive paint is what I put on my perfection kerosene stove that I am restoring, haven't tested yet with heat. Your wife's stove looks great. Thank you for the information. 😊

Those are nice, simple, effective stoves. They last forever and the window is a huge bonus!

I had a wood-burning fireplace in WA, much like yours, and that baby would produce the heat! If I ran a floor fan to move the air around, it would heat the entire house.

Thanks for posting this man! I will be restoring the EXACT same stove that is in pretty much the same state. It was my dad's and it will heat a backyard sauna, so kind of a special project. I'm new to metal restoration so the steps you showed here are super helpful! May skip the painting it red part though :)

I used a high heat automotive paint on my custom bbq pit and it’s held up for the last 6 years but I also used a high heat primer

Beautiful out in the woods house

Thank you for the helpful tips. I’ll keep them in mind. Great video. Hope you and your family have a very Merry Christmas.

Very relaxing!!

I need to do this to my little wood stove I bought a while back on f b market Great video. Thanks.

That second red paint looked waaaay better. You are good with your hands mang. Great job ! It came out amazing. The wife got this one too lol... The last video she swiped your chicken coop.... for the second time haha....❤ Go easy on him Tina 😂...

Sucker looks brand new! Outstanding work!!!

That looks great!

Like seeing fellow michigan boys on here!

Great job. I’m sure your wife will enjoy it for years to come

Great build! Merry Christmas to you guys.

NICE!! Lesson learned, and posted.

Those both likely were expensive when new. Quality. Some municipalities in the Western USA now ban wood heat. Imagine that. Sad. We have in the long past had 2 Buck Stoves. One in a small 1 bedroom home and one in a 4 bedroom home. Loved both.

Such a pretty stove! Good job! 👍

It looks great.

Good looking finished product 🔥 Merry Christmas 🎄

Hey Thanks buddy! Sorry though about you mishap. I am redoing my wood stove and was thinking of red and black. I was going to use flat black wood stove paint on the door and thought I might use the VHT automotive flat red high heat header paint on the stove. I can see now that wood have been a huge mistake. That must have been super frustrating for you but glad you didn't throw in the towel instead you bit the bullet and carried on through with plan two. So today I used high heat flat black stove paint on the stove and high heat copper color stove paint on the door. Have to run the cure outside tomorrow. Cross my figures. Another mistake you can make is on the re-coat time if you are doing a second coat. I had a corner heat shield I made 3x3x4 feet high and sprayed it with high heat stove paint out of spray bombs. It was going great until spray bomb nozzle started spitting lets call it barfing on the job. So on one bent section of the shield that the paint stared to spit all over, I sanded lightly and sprayed over the next day and unfortunately it started to alligator the prior days paint. Nightmare on Pain Street. So was left with no choice but to rub that section all off with acetone and start again. Not perfect the second time but nearly. I hate spray bombs with a passion but funny how we find ourselves using them again. There are better nozzles out there now but they still seem to screw up just when your nearly finished. They have a lot of xylene, toluene and or acetone in them so not only are they pretty toxic, you need to do all your re-coats within one hour in one session otherwise you need to wait 48 hours or more to avoid eating into the first coat and get the dreaded alligator finish. Not the wrinkle finish you were going for the other pull your hair out one. On the stove I used the Satin Black Rustoleum stove paint in the quart can and just thinned it enough to get out of the gun. It when on beautifully with no spitting like the stinky bombs. Hope I am still happy tomorrow after the heat cure fire.

Thanks for this

Good job Young man!

Nice job and good advice on the paint

Awesome!

You did a good job on it. It looks nice.

Nice to see recycled stove projects.

Extra work but end result looked amazing

I am really digging the channel keep up the good work. Try a twisted wire cup brush for the angle grinder eats through rust and paint. Work well and last forever. If needed I will finish with one of those 3M stripping discs. Strippers are nice but in my experience they are to distracting and not so handy around the shop lol.

That is some really nice restorative work you have done there. I bet it didn't look that good when it was built brand new.

That looks really good 👍

Another good option is true Rust-Oleum spray paint. A huge variety of colors. I've used it on plenty of engines.

Looks cool man!

Beautiful work 👏👏👏👏

Beautiful 😊

Great video! Keep it up!

The second red is infinitely better looking than the bright one, not to mention it resists the heat!

Good information to know. Thank you and have a good holiday

The burn , what it is will be , trial and error. Love the truth burn 🔥 and how they make something possible

Nice job , look good as new

Thanks for the heads up re the paint 😅

Better color for sure!!

Merry Christmas 🎄 to you and your family

Hey good vid, very informative!

Beautiful job 👍🏻 Merry Christmas 🎄. 🐾🙏🏻✌🏻

Very cool

Happy New Year

Merry Christmas!

Do I understand you correctly that I would have to hear up the stove and let it cool some to paint. I have a good wood stove store by me that has cleaned my chimney. I will be selling the house and want to certify the chimney and stove. For people who do not have a good clearance behind or below their stove pipe I learned that a flashing can be added to the pipe to eliminate need to change hearth.

Love I love this stove great job. Did you use acetone to clean the door after grinding ‽

Merry Christmas & Happy New Year

Nice, i have the same wood stove.

Great video ! That came out great ! What Brand of stove is it ? Merry Christmas to you and your family. Take care Ryan

I'll be sure to try that, whenever I find a "cheap" second hand wood stove... Second hand wood stoves start out at $450 around me, in worse condition than yours. (Oklahoma)

LOTS of 'Work'! I think this is the 'why' behind bargain prices. You really did a LOVELY job on the stove...thanks 4 sharing! I also like the 2nd color better. God bless and Merry Christmas!

Pro-tip: you can use those tiger paw sanding pads, but to avoid the flaps gumming up with paint, you just have to dip into clean metal frequently to knock that paint off.

Happy wife happy life

Who is the manufacturer of that stove? I need new glass and the glass retaining plate with new screws. Data plate is unreadable and I’m trying to do the same thing you did which looks fantastic!

What were you cleaning the stove with after you removed the rust, acetone?

That’s a Fleet&Farm stove we have one just like it at our cabin. It’s been 10 or so years.

Merry Christmas!!

Great just what I have to do with my over 50 year old wood stove that came with my house. I have had it for 30. Mine is not as rusty. So I figure it should not be hard to do. I do have a crack inside the liner, not sure if that is a problem?

PS it was the same model stove you refinished. They were cheap and they sold a lot of them. Not a high end stove but they work.

What brand and color is that red? I like it a lot as well.

Do you know what make and model this stove is. I just purchased a used one just like it and I need a piece of glass for the door

I’m sure your wife will enjoy it for years to come

My stove is very similar. It attracts dust like crazy. I have a hard time keeping a steady fire in it. It's either all out or dying down too much. Any tips?

I need one for the apartment, wonder how I can install outside the fire escape

what color and brand of wood stove paint did you use? It looks brand new!

Do you have a link to the second paint you used? Love that red!

Wearing headphones...OMG!! Squeaky glass!!

What size cabin did you put the stove in?

Best to have a good heat shield BEHIND THE STOVE... HMMMM

What's the product you use after grinding/sanding?

That's not moisture but the H out of the CH4 (gas)

That was too bad about the paint. But, if you found red stove paint in the end why did you use the first paint?.