Experimenting with hotel cards - retrieving keys and emulating cards #nfc #mifare
Пікірлер: 68
@kristianbaraldi9046 Жыл бұрын
helpful video, thanks!
@solyngen883 Жыл бұрын
Godt å se nordmenn lage videoer om slike ting :)
@axxelgannon91468 ай бұрын
Did you press continue after reading the reader? What did you do?
@adser86879 ай бұрын
I love this tutorials straigth 2 da point
@mr.x23 Жыл бұрын
Nice
@theodordimov65187 ай бұрын
When you initially tried to read the card it said it managed to read 16/20 pages - it's safe to assume that one of the 4 unread pages was the one holding the password so you would not have been able to see it in the .nfc file before the actual password-capturing step
@mastrotentaculopapichuloАй бұрын
I had 16/32 and it worked fine. Do u guys even check if it works when "it doesnt find all pages" ?
@bazooka57808 ай бұрын
Man I really miss your videos fr ❤
@techandfun77238 ай бұрын
Thank you. I've been too busy, but more videos are coming soon
@dseednorwayn478 ай бұрын
@@techandfun7723 Cool, curious on if you done any skipass readings and had the chance to test the xtreme firmware or if you by any chance have tested the Chamelon Ultra from Lab401?
@WPGinterceptor460Interceptor5 ай бұрын
What are you using to read a NFC file?
@johnnyhellfire6 Жыл бұрын
Just ordered mine last night mahahaha
@silvio2402 Жыл бұрын
Great video! I was at a hotel with Mifare Ultralight (11?) and couldn’t get it to detect reader. Are there readers that aren’t susceptible to this vulnerability or did I do something wrong? I came to the conclusion from research that MFKey32 attack only works with Mifare Classic cards but your attempt shows that it can crack the ultralight. Or did your method use something different than MFKey32?
@grantstinson4861 Жыл бұрын
I am having the same issue!
@valheruguild11 ай бұрын
What firmware are you running?
@OurFather249 ай бұрын
Some readers have anti-copy tech. Don’t know how to differentiate but, you may be able to emulate with flipper, but actual key is no longer usable
@miloosa69176 ай бұрын
Im trying to Duplicate an Elevator access card (Mifare ULTRALIGHT 11 , ISO 14443-3 , NFC-A It reads the card which is password protected and asks me to approach the reader to get the password , so i scan the reader and it gets the password Successfully and asks me to read the card again to save that info on the flipper zero. But in the option i dont have 'write to Initial card' which is for duplicating that card so i only can use the Flipper zero itself to emulate that NFC Frequency into the Elevator's reader each time im going up... What if i want to write and duplicate on different cards ? The only options i have on my flipper are these : Emulate Info Restore to original Rename Delete Any suggestions???
@Potato.68 Жыл бұрын
Please say how to do that with a NFC phone and a script
@exploreworldx4 ай бұрын
It copies does all,but when i try try to emulate,does nothing,anyone knows why?
@Morcego5388 ай бұрын
After getting the password from the reader what option did you clicked in "continue" for the flipper to ask you to "apply the target card"?
@axxelgannon91468 ай бұрын
Im confused about this part too
@Morcego5388 ай бұрын
@@axxelgannon9146I will try this wen I have a chance and I will find out. I will get back to you to help out.
@vxbrxnt7 ай бұрын
What firmware is this? Mine doesn't have "Unlock with reader" option anywhere.
@igoraugustin42904 ай бұрын
Do you already know what firmware is?
@blendi0042 ай бұрын
I know-its not Unleashed for sure?
@blendi004Ай бұрын
Extream firmware
@user-lw3ij9np7t2 ай бұрын
Guys how can i add keys to my flipper ?
@grc_whale13042 ай бұрын
Is the song on your outro Josh Martinez?
@Morcego5384 ай бұрын
Picopass is NFC or RFID?
@Thadopeera Жыл бұрын
I have a question maybe you could help me out with. A friend of mines is a manager at ampm gas station. He allowed me to try to hack their air and water machine which is turned on with radio frequency.. I pushed the button, hit frequency analyzer and it read at 918.00mhz.. so I bumped the frequency up to 925mhz then hit read but the flipper couldn’t pick it up.. You think maybe the distance was a factor??
@kongakonga7 ай бұрын
Wrong frequency bro
@Thadopeera Жыл бұрын
I’ve read about 5 rfid cards and never seen a password protection issue on them.. Is that because of a weaker security?
@joyhoward610511 ай бұрын
This is nfc not rfid
@Crazy--Clown Жыл бұрын
Andreas Spiess here on youtube did a good video on this without a flipper
@pamelax64 Жыл бұрын
Not avalaible in many country,lucky you!
@GM_O Жыл бұрын
That sucks :/ i just got mine in the mail today ;p
@pamelax64 Жыл бұрын
@@GM_O happy for you ;)
@johnnyhellfire6 Жыл бұрын
Which countries?
@tankmaster60622 ай бұрын
The flipper zero is just a bunch of different tools slapped together into an easy to use and fun piece of hardware If you are super into this stuff you can try and make a lot of these things yourself (although I'm not sure on the legality of this) But this is much more difficult...
@The_Positive_Hour Жыл бұрын
Can the flipper zero clone or copy a game card?
@hayleyoram264711 ай бұрын
Yea
@The_Positive_Hour11 ай бұрын
@@hayleyoram2647 could you show how to do that? I’ve tried but it never finishes the last part of the DL.
@NotPorn Жыл бұрын
This is so cool. I need to look up local laws and stuff before I even turn the flipper on! 🤣🤣🤣🤣 I don't want to accidentally unlock a neighbor's garage door or something just because my button got worn out in my car. Be safe, flipper homies!
@minibikemadman11 ай бұрын
it's not that bad lol I've owned one for 3 months already. It's all about how you use it.
@PLAYINSKILSSRT3 ай бұрын
Ur dumb lol
@ishdemon_10 ай бұрын
doesnt work with mifare ultra..only classic
@LeHeavyBoy7 ай бұрын
KHAZAKSTAN
@hish30008 ай бұрын
Can I use flipperzero to hack biometric face recognition attendance
@lagknowswhy8 ай бұрын
Dumb?
@agskeete Жыл бұрын
soo where can i pick one up??
@ClickClack_Bam Жыл бұрын
Google it bro. They were in stock last time I looked.
@baileysalvatore533211 ай бұрын
I’ve got a card without password (it’s nfc) but when I go to emulate it, door remains locked
@Dave-386311 ай бұрын
*Tapn @LITTWEBB*
@Dave-386311 ай бұрын
On tele
@WPGinterceptor460Interceptor5 ай бұрын
me too, did u figure out why
@staslogachev582511 ай бұрын
Why the name of this device looks like Флиппер ?)))
@battlebman10 ай бұрын
iirc, it is only present on the orange cover (made to protect the device) and it translates to flipper or something not entirely sure
@ukhogwash3 ай бұрын
If that’s the case, does it mean if someone does exactly the same educational thing you did in the clip, he / she can somewhat break into the same room some time later, yeah?
@the-terraria-nerd31303 ай бұрын
That depends on if the hotel uses the same key card and same nfc data for the card instead of changing it after each guest
@the-terraria-nerd31303 ай бұрын
As long as the hotel doesn't change the required nfc data for the scanner after each guest (which some do) then yes you could educationally trespass
@OneAndOnlyZekePolaris Жыл бұрын
Didn't know you own this card.
@OneAndOnlyZekePolaris Жыл бұрын
Joke
@HaiPhamlawАй бұрын
Anti-copy card reader?? Ad!
@stou-hh6yh5 ай бұрын
How can i contact you ?
@rynogameover Жыл бұрын
data_gov?
@gman3163 Жыл бұрын
So can you top up card then from flipper your say 🤷♂️🫡