Retro Header Build-Off Part 7: Installing -AN Cooling System

Рет қаралды 62,282

6 жыл бұрын

Now that the exhaust is complete, all that is left on the car is the cooling system. When Art first brought his BMW to the shop, his coolant lines were spewing their guts. With all new Vibrant Performance -AN lines and Fittings along with a new radiator, thermostat, and waterpump, he shouldn't have anymore issues. In this segment, Art shows us how easy it is to make your own coolant lines using the Vibrant Braided Flex Hose, -AN Fittings, and which tools he needed to get the job done.
Be sure to subscribe so that you don't miss the next episode:
►Subscribe: bit.ly/2gJyK9F
Be sure to check out the Speed Academy channel to see what Jay is up to and how they build their header:
► • Celica Beams 3SGE Head...
If you want to learn more about Vibrant Performance Products:
bit.ly/2fBIuRz
Parts used on this exhaust system (Vibrant Part Numbers)
Header:
4x 2603 U-J 1.75" Mandrel Bend
2x 10350 1.5" - 1.75" Collector
6x 10340 Spring Tab Kit
4x 2601 U-J 1.5" Mandrel Bend
1x 10352 1.75" - 2" Collector
Anti Reversion Chamber:
1x 2686 2"-2.5" Reducer
2x 2630 2.5" - 3" Reducer
Exhaust:
3x 1490 2.5" V-Band Assembly
1x 60804 2.5" Flexible Coupling
1x 7525 GESi Catalytic Converter
1x 2641 2.5" Straight Tubing
1x 11898 Exhaust Hangers
1x 1188 Saddle Style Weld-on O2 Bung
1x 1118 Street Power Muffler
3x 13040 2.5" Mandrel Bend 90 Degree
Or visit our website: www.VibrantPerformance.com
Follow us on Instagram: @Vibrant_Performance
And Like us on Facebook: / vibrantperformance

Пікірлер: 74

@RobertKohut 6 жыл бұрын

Wow, loved that cold start especially the "skrrraap pop! pop! ka ka ka" that was amazing!!!! Corsa LOOK OUT!!....LOL...LOL

@CessnaStyle 6 жыл бұрын

That first start is so good!

@JohnnyFabz 6 жыл бұрын

Aaron's fab skills are amazing!

@Mike_Pedals 6 жыл бұрын

My hat is off to you guys for making your videos more entertaining than the Speed Academy's. You have my vote ;)

@hotdognr12323 6 жыл бұрын

I must say it sounds fabulous!

@dallaschandler2843 2 жыл бұрын

i know im asking the wrong place but does any of you know of a tool to log back into an Instagram account..? I somehow lost the login password. I love any assistance you can offer me.

@sergiosergio68 2 жыл бұрын

@Dallas Chandler Instablaster ;)

@dallaschandler2843 2 жыл бұрын

@Sergio Sergio thanks so much for your reply. I got to the site on google and I'm waiting for the hacking stuff atm. Looks like it's gonna take a while so I will get back to you later with my results.

@dallaschandler2843 2 жыл бұрын

@Sergio Sergio It did the trick and I now got access to my account again. I am so happy:D Thank you so much you really help me out!

@sergiosergio68 2 жыл бұрын

@Dallas Chandler you are welcome xD

@doctahwhoopass285 6 жыл бұрын

Well, with that shiny new header, you gotta get some nice Weber DCOE carbs on there! Might as well get a new cam while you're at it, and oh, isnt it time to upgrade the suspension?.......

@VibrantPerformanceTV 6 жыл бұрын

There will definitely be an upgrade on the intake side over the winter including all new carbs, refreshed head and a new cam. I also have all new suspension for it, however we just wanted to focus on the exhaust and coolant modifications for this series. You can be sure to see a video of Speed Academy's Celica and the 2002 reuniting in the future and going for a drive together with all the new modifications.

@vincevegacustoms8860 6 жыл бұрын

Thanks for the support brace trick! Nobody needs to order any,takes so little effort to make

@G10v4nn1 6 жыл бұрын

One thing I noticed when you guys explained the line going from the upper radiator connector to the waterneck/thermostate housing: When turning the hose that it enters the waterneck from the upper side you risk creating an area where air bubbles can accumulate and make bleeding the system an absolute nightmare...

@BruceLee-xp5fc 4 жыл бұрын

Wow what a gold channel

@p330hne 6 жыл бұрын

YES you absolute fucking legends pap pap boom boom

@TheForcedinductn 6 жыл бұрын

love dat BMW pap pap boom boom

@2tonedc5 4 жыл бұрын

Would you recommend using these hoses if the engine and radiator are on opposite sides of the car. Trunk to hood length. Let say 6-8 feet in each direction.

@truthseeker8483 6 жыл бұрын

Hey nice workmanship..the only thing I worry about is the original hoses were all rubber so they were vey flexible however some of your hoses have very short sections of flexible hose which may transmit more vibration to the radiator etc...

@VibrantPerformanceTV 6 жыл бұрын

It's very important to have flex, like you said. However, the Vibrant Race Hoses are flexible as well, actually more flexible than the original ones. The lower section is now longer to allows more flex, and the upper portion has the silicone piece that attaches to the waterpump which allows for flex as well as you can see at 10:17

@hamzalag2006 2 жыл бұрын

Thanks

@rlew12 6 жыл бұрын

how did Aaron clear the chips out of the radiator after drilling? i was thinking of making a custom oil cooler and intercooler and could use some tips -ryan

@VibrantPerformanceTV 6 жыл бұрын

Hey Ryan, you could either vacuum them out, or blow them out from the other side. Ideally you want to de-bur the hole using a deburring tool. This will provide larger chips as opposed to a hand file which will create smaller chips that are much more difficult to remove.

@RobertKohut 6 жыл бұрын

That's some pretty small ID coolant piping. Looks nice though!

@coryhalvorson8874 5 жыл бұрын

I thought the same lol, but it's just a lil 4 banger, not going to be generating enough heat to necessitate larger (wayyyy more expensive) fittings and line

@gerrit2107 6 жыл бұрын

where can i buy me some vibrant performance cardboard?

@bsjmarble 6 жыл бұрын

Gerrit-Jan Bergwerf I think if you order some stuff from them they send you some complementary performance cardboard ;P

@kayshwarsieunarine 4 жыл бұрын

Hey how much would it cost for this set up on a different car for just the large upper and lower rad hose?

@VibrantPerformanceTV Жыл бұрын

Would really depend on the length, type of fittings and amount of hose you are running.

@jeffreygomez7360 5 жыл бұрын

hey wats the song in the background

@dinxsy8069 6 жыл бұрын

Gotta love Vibrant Performance hardware, it's a shame when ordering to the UK we get screwed by import duties.

@VibrantPerformanceTV 6 жыл бұрын

Contact BTN Performance, they are our direct UK Dealer

@MrCaprinut 6 жыл бұрын

Any Norwegian Vibrant dealers?

@VibrantPerformanceTV 6 жыл бұрын

It would also be BTN Performance, as they are our master distributor for all of Europe.

@wiliambanquiter8039 6 жыл бұрын

Fire in the bay, fire in the bay, your manifolds not hot, manifold can never be hot

@japmuscle 6 жыл бұрын

Does anybody else think the plumbing would have been way neater if the top-hose connected to the drivers-side tank and the bottom-hose connected to the passenger-side tank or just me?

@VibrantPerformanceTV 6 жыл бұрын

I was trying to do that initially, the problem was the positioning of the thermostat. It had to go directly to the water pump to separate the water coming from the radiator and directly from the engine. If you ever look at the oem lines, it uses an "S" shaped hose at the bottom which usually kinks. -Art

@getweir_d 6 жыл бұрын

also, a longer line will be more flexible and accommodate engine vibration/movement as the radiator is fixed.

@RobertKohut 6 жыл бұрын

FYI...I vote your build "The Winner"...Header that is....LOL

@aussiebloke609 6 жыл бұрын

6:57 Aren't those fittings going to choke your coolant flow a bit? The ID looks to be quite a bit smaller than the stock hose ID, and even a small difference in diameter will make a large difference in cross-sectional flow area.

@VibrantPerformanceTV 6 жыл бұрын

You are right about it being smaller, the factory ID for the M10 engine is 1.25", and the -16AN hoses are 1" ID. We have seen this exact radiator setup (which also comes with -16AN bungs preinstalled) in many 1200+ WHP race setup (Drag and Circuit) 4 cylinder Honda Engines with no overheating issues (for comparison - Honda B and K series engines have 1.25" ID hoses from factory). We also have know that Will Au-Yeung's Vibrant Time Attack Civic (1000+whp, turbocharged 4 Cylinder K Series Engine) is currently equipped with -16 AN lines and not experiencing any overheating issues. You can see a video of his car setting the track record at Buttonwillow on our channel. -Art

@magnetic0314 6 жыл бұрын

aussiebloke609 with a decent radiator setup, I feel like the difference would be negligible.

@RobertKohut 6 жыл бұрын

With a factory water pump??

@aussiebloke609 6 жыл бұрын

Kinda what I was concerned about...the rad isn't important if you can't get the coolant to and from it fast enough. Those older engine designs didn't exactly have the most efficient water pumps - those Honda engines mentioned would have much better flow from the factory, and I wouldn't be surprised if they were running improved pumps, or possibly even electric helper pumps. If you reduce the ID from 1 1/4" to 7/8", you lose about a third of your cross-sectional area - 3.9 sq in vs. 2.6 sq in (-16 AN is a 1" OD, so that should be pretty close for the ID) - making a significant difference to possible flow rate and possibly increasing the likelihood of cavitation inside the pump at higher RPM (and of course, the easier the coolant flows, the less parasitic load from the water pump - another plus in terms of performance.) It may work, but it would be too marginal for my taste. On the other hand, I come from a country where the road surface sometimes melts on a nice, hot summer's day (you can sink your tyres into it if they spin, just like driving in thick mud), but it may be less of an issue where you blokes are. :-D

@kawasakieddy61 6 жыл бұрын

My favorite part is the "you want to consider that"

@yolandathomas7862 6 жыл бұрын

What size r the an fittings u r using

@VibrantPerformanceTV 6 жыл бұрын

For the Coolant setup, -16AN fittings were used

@jeffleblanc8850 4 жыл бұрын

We’re are they located in Montreal

@VibrantPerformanceTV 4 жыл бұрын

We are located in Mississauga, Ontario

@jackinthebox6143 Жыл бұрын

What size are the AN fittings? Oh by the way WD40 isn't a lubricant.

@VibrantPerformanceTV Жыл бұрын

We agree, WD40 is a solvent but we are using it as a 'lubricant' in this situation so that they fittings don't go in completely dry. The size of the Upper and Lower Fittings and hoses is -16AN

@jackinthebox6143 Жыл бұрын

@@VibrantPerformanceTV It's job (wd40) is to displace water but there's another spray I use available in the UK called GT85 which lubricates and prevents rust and generally used on bike chains. It''s a light lube and really good to have hanging around for these type jobs. I bought AN16 fittings for my EWP project on a Ford 289 mustang. Thanks for your video I can see that they can work as I was worried they might be too small as the standard hoses on a 65 Mustang are 1.5" (top) and 1.75" (bottom)!!

@brianlutzak 4 жыл бұрын

How do I get one of those custom Mufflers? LOL

@VibrantPerformanceTV Жыл бұрын

You can order them through our distribution channel, feel free to check our website, we have plenty of options: vibrantperformance.com

@MrBenstero 6 жыл бұрын

Really hope the hose material isnt rubber because that wd40 will just deteriorate that hose pretty quickly. Would suck to put that much effort in that system to have to redo it in a year or two. Silicone lube works best for assembling these hoses.

@VibrantPerformanceTV 6 жыл бұрын

These hoses are "E85" safe; Aaron had done it this way with all the lines in the RWD CRX about 4+ years ago. We have yet to have a leak from any of the oil, water or fuel lines he's done.

@coryhalvorson8874 5 жыл бұрын

The type of hose used there looks like either startlite which has an elastomer smooth bore inner tube (safe for all water, lube, fuel or air) or if they're using the fancier stuff (I forget the technical name) it has a nylon bore, either way wd-40 won't touch the stuff

@brianvisek 6 жыл бұрын

arron looks like elmer fud

@DjNileOne 6 жыл бұрын

gave me a laugh.. pa pa pa!

@BLUEVITZrs 6 жыл бұрын

Meep

@xturboexpress 6 жыл бұрын

I died.

@lucianosantos-uq7gm 4 жыл бұрын

Kkkk

@tomscustomshop 4 жыл бұрын

Posh!

@phoneuser3569 6 жыл бұрын

Now you need to bash in the sheetmetal so that stupid bundle of snakes doesn't rub when the motor mount flexes.

@AlfredBenyardJmoney Жыл бұрын

Funny part is that's how I describe honda car noise

@TheShangralaaaa17 3 жыл бұрын

So $300 in hoses and fittings and paying someone to tig it all? I'll stick to rubber hoses lolol

@edwardmullen1581 5 жыл бұрын

WD40 is a penetrant not a lubricant.

@coryhalvorson8874 5 жыл бұрын

I used to argue that, til I found out it's basically fish oil, not as much lubricity as needed for bearings, but perfectly fine as an install lube. Nice and light, no residue to worry about.

@phoneuser3569 6 жыл бұрын

No need for those race fittings on that old turd of a engine. It is like putting a giant carbon GT wing on a Yugo. You kids know they make OE fitment cooling products right?

@vincevegacustoms8860 6 жыл бұрын

Phone User get to know what makes builds unique..average backyard builder would use rubber i feel you

@EUC-lid 6 жыл бұрын

Old turd of an engine? BMW used to use production m10 blocks to make 1500hp F1 engines. They're fantastic little motors and easy to work on.

@danielnapast4955 6 жыл бұрын

Adam Jordan That and they are trying to teach people how to build a cooling system in a roundabout way. I don't get why people cant understand that these guys are trying to teach us not just spend $300 on hoses for no reason.

@coryhalvorson8874 5 жыл бұрын

Heh, are they spending your money on that car? No? Then shh, it's not your problem.