Reupholstering a Vintage Car Door Panel
Рет қаралды 197,486
Күн бұрынReupholster your vintage or classic car door panel yourself using supplies and tools from Sailrite. The style of car door panels vary greatly, but the principles of fabricating them are all similar. Follow the steps in this video and you too can easily upholster your vehicle's car door panel yourself.
REUPHOLSTERING A VINTAGE CAR DOOR PANEL CHAPTERS:
Preparing Dorr Panels Board - 0:35 min
Cutting Vinyl Fabric to Size - 1:53 min
Gluing Sew Foam to Vinyl Fabric - 2:58 min
Sewing Pleated Channels - 5:06 min
Creating Transition Strip - 7:25 min
Attaching to Door Panels - 10:46 min
Cutouts for Hardware - 13:53 min
Material List - 15:17 min
MATERIALS LIST:
Quality Marine Vinyl Fabric - www.sailrite.com/Fabrics/RV-a...
3M™ General Trim Adhesive - www.sailrite.com/3M-General-T...
Fabric Backed 1/2" Sew Foam 58" - www.sailrite.com/Fabric-Backe...
V-92 Polyester Sewing Thread - www.sailrite.com/Notions/Thre...)
Seamstick 3/8" Basting Tape for Canvas - www.sailrite.com/Seamstick-3-...
21 Gauge 1/4" (6mm) Staples 10,000/Box (Stainless Steel) - www.sailrite.com/Sailrite-21-...
TOOLS LIST:
Hole Cutter 5/16" ‑ #1 - www.sailrite.com/Hole-Cutter-...
Scribe‑All® Water Soluble Marking Pencil White - www.sailrite.com/Scribe-All-W...
Barry King Mallet Hammer Style 3# - www.sailrite.com/Mallet-Hamme...
Sailrite® Cutting Block & Die Holder - www.sailrite.com/Sailrite-Cut...
Gingher® Scissors Right Hand Lightweight 8" - www.sailrite.com/Gingher-Scis...
Clear Acrylic Ruler 6" x 24" - www.sailrite.com/Clear-Acryli...
Comfort Grip Rotary Cutter 60mm - www.sailrite.com/Olfa-Deluxe-...
Self Healing Rotary Cutting Mat 24" x 36" - www.sailrite.com/Self-Healing...
Washable Wonder Fabric Marker Blue - www.sailrite.com/Washable-Won...
Sailrite® Fabricator® Sewing Machine - www.sailrite.com/Sailrite-Fab...
Sailrite® Long Nose Upholstery Staple Gun - www.sailrite.com/Sailrite-Lon...
@garygerard4290 6 ай бұрын
'Narrator gets an A+ for explaining everything very well. Thank you for these videos I ordered a Fabricator yesterday.
@SailriteDIY 6 ай бұрын
Thank you for your kind words! I'm glad you found the explanation helpful. Enjoy your Sailrite Fabricator Sewing Machine!
@yellowtr6 4 жыл бұрын
All of my upholstery work is doing interior panel kits for the classic British Sports car the Triumph TR4 and TR6 so I have two suggestions for your video. The vinyl gets cut about 2" larger than the card but the foam should get cut the same size as the card. This eliminates the bulk that you're showing that can affect how the panels will fit. When you're using upholstery or headliner contact cement, wait for it to flash and feel dry to the touch and then put waxed paper on top of it. Now you can lay the other piece on top of the waxed paper and position it perfectly without fear of things sticking together. Once the pieces are aligned, slide out the pieces of waxed paper.
@carsbikeandmusic1236 3 жыл бұрын
Absolutely correct .... as v r manufacturing trims here in delhi india .... v do same
@seinarukishi9228 9 ай бұрын
What about shrinkage from the sewing? when sewing leather to closed cell I have came around a quarter inch short on all sides vertical to stitching when doing stripes similar to the ones in the video. Good advice on the adhesive, I have had mixed results depending upon the adhesive brand though.
@jraposo911 5 ай бұрын
Yellow tr6 can you recover my dash for me . Vinyl or leather. It’s all cracked . 71 Lemans 😊
@corinnegeddings4667 2 жыл бұрын
Getting ready to do the door panels and headliner in a 27 “T” coupe....this is very helpful! THANK YOU
@AnthonyColebourn Ай бұрын
Brilliant video. So detailed and well explained.
@chuckgordon3693 2 жыл бұрын
Thank You very informative.
@thek.p4899 4 жыл бұрын
Thats awesome great talent
@SailriteDIY 4 жыл бұрын
Thanks!!!
@marcussmith4913 Жыл бұрын
this is awesome bro. thank you I waNT TO see how to do velvet inlay work as well.
@countrysmurfcomedy3099 Жыл бұрын
💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾🔥.. Very informative, great tips..
@samperras 2 жыл бұрын
Thank you
@wacherawaiganjo9938 4 ай бұрын
Lovely 😍!
@SailriteDIY 4 ай бұрын
Thank you! 😊
@inactive67 3 жыл бұрын
When marking or cutting and having to move your straight edge, leave the pencil/pen or blade in place and move the straight edge.
@DMAX_DIY 2 жыл бұрын
Pretty cool video my friends! Thanks for posting! I'm needing to make some stuff for my racing seat.. Good tips.. DMAX motion sim ch
@exchaoordo 2 жыл бұрын
Just the video I need! Do you think a regular sewing machine will have the power to do the sewing you're doing? What are you using for thread?
@Banditemcee123 2 жыл бұрын
GREAT VIDEO!! Could you show how to button tuft a door panel like you would see in a lowrider I would love to see how it's done if possible 😊
@SailriteDIY 2 жыл бұрын
Hi Bandit, We are planning on doing a video on tufting at some point this summer. I think we will be tufting a headboard, but the concepts should be very similar.
@larrystehle8746 4 жыл бұрын
You have an incredible amount of bulk as you fold that 1/2 in foam around the panel and that could result in poor fit as you attach the panel to the car. Try trimming the foam to the panel before wrapping and attaching....
@Sugarkryptonite 4 жыл бұрын
Good idea! Thanks
@tommybroughton2191 2 жыл бұрын
for real
@ARASHMAFI1 4 ай бұрын
Not to mention ½” being so overkill for door panels
@evenemad5010 3 жыл бұрын
Big thanks ❤️😊
@mikem3403 Жыл бұрын
Someone please let me know. If you were to not wrap the foam around the back, how do you keep the staple from coming through the front? Or would the glue be good enough to hold the vinyl?
@GarageItYourself Жыл бұрын
How would you go about doing a butt join of the two colours instead of using the additional strip of vinyl?
@TheHamadanners 4 жыл бұрын
Mmm vintage
@scottschmittmusic 11 ай бұрын
Neato!
@itseasiertotakeitsomewhere738 2 жыл бұрын
Those sharp staple ends have to go somewhere. Aren't you able to feel them on the outside? That cowl board is only 1/8" thick.
@OUTFXD Жыл бұрын
"Car Door Panels... are typically found on Classic cars!" "We are cutting wholes where the Plastic Rivet inserts need to be inserted" We have very different opinions on what constitutes a "classic car" Great vid! Thanks!
@tommybroughton2191 2 жыл бұрын
where do you get this cowl board every site I look on it is like they dont know what I am talking about
@dyingforpie6879 Жыл бұрын
My door panels have a radius- straight ones are easy 😄
@user-io8pz9ow8l 4 жыл бұрын
🌷🌷🌷
@dijones2441 4 жыл бұрын
😃👍
@siamese35 4 жыл бұрын
Does this machine have a foot operated reverse and a thread cutter?
@boarhog1979 4 жыл бұрын
no. It will have a lever for reverse and is not an automatic machine. A Juki LU-158 which is a monster long arm machine uses a foot-operated reverse
@boarhog1979 4 жыл бұрын
at 635 you can see the push down lever for reverse
@user-mn1ws3uk6g 4 жыл бұрын
👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
@joanneczaplicki4460 3 ай бұрын
Is this an industrial machine? Will a regular sewing machine sew through this foam and vinyl?
@SailriteDIY 3 ай бұрын
I do not think a home sewing machine will work very well with this project, sorry.
@CulinarySpy 3 жыл бұрын
Where can one find the 'cal board' or whatever is?
@davesoanes1649 3 жыл бұрын
Cowlboard
@CulinarySpy 3 жыл бұрын
@@davesoanes1649 yeah that - where do you source it?
@dyingforpie6879 Жыл бұрын
@@CulinarySpy did you get an answer? Just use 1/8 hardboard
@jacintolangi767 3 жыл бұрын
you know what? you sound like Agent Smith in The Matrix ^^ i like your voice
@DaRooMN 3 жыл бұрын
Thought exactly the same XD
@porroh869 3 жыл бұрын
Strike a straight line Mr Anderson
@user-mn1ws3uk6g 4 жыл бұрын
❤️❤️❤️❤️❤️❤️❤️
@MrJaespun 4 жыл бұрын
Do you guys sell used sail rite machines?
@SailriteDIY 4 жыл бұрын
Sorry, we do not.
@dsloop3907 4 жыл бұрын
www.used.forsale/sailrite-sewing-machine
@hasnaoldgmail8097 4 жыл бұрын
@@SailriteDIY hello sailrite can i talk to you in private please !! I want to send you some pictures of what i make so that you encourage me please
@SailriteDIY 4 жыл бұрын
@@hasnaoldgmail8097 email me at ericg@sailrite.com
@floridasaltlife 4 жыл бұрын
You will find a much larger market when you start selling to car guys !!!
@tthams73 3 ай бұрын
I never use spray adhesive on door cards. It’s not durable enough
@SailriteDIY 3 ай бұрын
Oh, nice tip!
@greavous93 Жыл бұрын
too much foam in the corner and around the edges. A door panel that wont lay flat when installed is wasted time and materials.
@ARASHMAFI1 4 ай бұрын
Totally agree looks like crap. Foam should be cut the same size as the board so when the vinyl is bent over it has nothing glide in the back but the vinyl
@georgespapillon364 2 жыл бұрын
Where can I get the car board ?
@SailriteDIY 2 жыл бұрын
Sorry, we do not carry it. I would search Google: "cowl board upholstery board"
@richlounder2465 Жыл бұрын
Totally wrong, the foam should never go behind the door trim, too fat and bulky. Cut the foam off to the board edge so that you only have the thickness of vinyl around the back.
@mikem3403 Жыл бұрын
How do you staple the vinyl to the board without it coming through the front? Or would the glue be good enough?
@terryblanchard8199 4 жыл бұрын
Jh
Autorestomod Manic Mechanic Gasoline Media
Рет қаралды 108 М.
LeatherSeats.com
Рет қаралды 113 М.
Sam's Project Bench
Рет қаралды 111 М.
Sam's Project Bench
Рет қаралды 197 М.