Where to Buy: bit.ly/2018-2020-honda-accord...
Follow along as we do a super quick mirror removal and install for the 2018-2020 Honda Accord side view mirror. It's much easier than you think! If you'd like to see anything else or have any questions, let us know in the comments below.
Source: www.revemoto.com
00:00 Introduction
00:46 Remove control panel
01:15 Remove door panel screw
01:35 Remove door panel
01:55 Remove mirror base cover
02:17 Tools needed
02:43 Remove side view mirror from door
03:11 Install side view mirror
03:31 Attach mirror to door
04:02 Attach door panel to door
04:38 Reattach control panel to door
05:06 Visit ReveMoto.com & thank you for watching
TOOLS NEEDED:
You will need a socket wrench to remove this Honda Accord side view mirror. It'll work for the years 2018, 2019, or 2020. To take off the door panel, you will need a panel clip removal tool and a Philips screwdriver. If you do not have a panel clip removal tool, you can substitute it using a flat-head screwdriver (just be careful not to scratch your car since it'll be more abrasive).
PROCESS:
Use the panel clip to uncover the screw hidden behind the armrest or window control module, then use a screwdriver to remove this screw. The interior piece is part of the door trim or behind the door panel. You will have to pull the door panel away, Door panels are easy and fairly simple to remove, just wiggle it out carefully, and usually, you'll have to pull it up to unhook it. The next step is to remove the speaker uncovering 3 screws holding the side view mirror. Using a socket wrench, unscrew the bolts and be careful not to let the mirror drop to the floor (that would be terrible!). Installing a Honda Accord mirror is pretty easy, especially if you just follow these quick and simple instructions. Using these simple tools, you can easily remove the mirror yourself.
This installation video works with several model options and features for 2018, 2019, and 2020 Honda Accord side view mirrors. Shop this Honda Accord painted mirror here:
bit.ly/2018-2020-honda-accord...
Replaces OEM mirrors with these part numbers:
WITH: Power, Heat, Blind Spot Detection | WITHOUT: Turn Signal, Automatic Reverse Tilt, Memory
-76258TVAA22 (Left, Driver-Side)
-76208TVAA22 (Right, Passenger-Side)
WITH: Power | WITHOUT: Heat, Turn Signal, Blind Spot Detection, Automatic Reverse Tilt, Memory
-76258TVAA02 (Left, Driver-Side)
-76208TVAA02 (Right, Passenger-Side)
WITH: Power, Heat, Turn Signal, Blind Spot Detection | WITHOUT: Automatic Reverse Tilt
-76258TVAA42 (Left, Driver-Side)
-76208TVAA52 (Right, Passenger-Side)
Follow us to check out what we're up to!
FB: / revemoto
IG: / revemoto
Twitter: revemoto?lang=en
TikTok: / revemoto
________________________________________________________
#hondaaccord #HowTo #installation #revemoto #paintedautoparts #DIY
DISCLAIMER: While ReveMoto tries to make the information in this video as accurate as possible, we make no claims, promises, or guarantees about the accuracy, completeness, or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself (DIY) projects entail some risk. It is the sole responsibility of the viewer to assume this risk. ReveMoto is not responsible or liable for any loss, damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.