Reversing Sensors Install

Reversing Sensors Install - Easy!!

Рет қаралды 19,504

3 жыл бұрын

#SUBARU #FORESTER #BOXER #EJ25 #DIY #Carer #Cars #Daily #Auto
Another simple and effective modification to the car, I believe they assist greatly when reversing and for a low price and a small amount of work are a very good upgrade!
They can be found online easily, just look for Parking Radar Monitor Detector System Car Auto Parktronic LED Parking Sensor with 4 Sensors Reverse Backup Backlight Display.
Feel free to leave a comment, Like and Share the video and Subscribe!
Thanks for Watching!!! 😁
Music: 🎵 1973 - Bruno E

Пікірлер: 25

@charliegeorge. 4 ай бұрын

Wish i was as chilled as you! You weren't even phased at all, just wearing flip-flops also! I need a neighbour like you to pick their brains and give me confidence to attempt these jobs. 😁

@ScubaMade 4 ай бұрын

Haha thanks heaps! 😁 I worry about my neighbors sometimes when I rev up my other cars though, but I don’t do it very often so it should be ok!

@greggregson9687 2 ай бұрын

Just got a hand me down Subaru Liberty RX 2001 model, and I thought this would be a good idea. Then I saw your video. Should be somewhat similar in practice to do. Thanks legend.

@ScubaMade Ай бұрын

Sounds good and that’s a nice car to get, hopefully it’s a similar job and improves the fuel economy too!

@zunigagt 2 жыл бұрын

Great video!, Thanks I will use it when I will install the sensors to my Forester. Greetings from Chile, South America.

@ScubaMade 2 жыл бұрын

Awesome, thank you! Nice to know you’re in Chile too! Greetings from Australia 😃

@Mark-ks9jj 7 ай бұрын

Great install video & a great mod given the blind spots on the SH forester (experience).

@ScubaMade 7 ай бұрын

Thank you very much, I really appreciate that 😁👍🏼 I agree that they’re a great mod too!

@nchia Жыл бұрын

Nice job, mate. And here I was wondering how to install these so if the rear bumper cover had to come off, it wouldn't yank everything out! I wouldn't worry about the display however, just the sound would be sufficient.

@ScubaMade Жыл бұрын

Ok cheers buddy, yeah the sounds pretty good to know when you’re getting close to something.

@BobaFutt 8 ай бұрын

Thank you!

@ScubaMade 8 ай бұрын

No problem, thank you too!

@sprite7841 Жыл бұрын

nice video, can i ask what drill did you use to drill and make the hole?

@ScubaMade Жыл бұрын

Thanks heaps buddy, the little hole saw came in the kit with the sensors if that's what you mean, and the drill I used was just a Ryobi cordless!

@sprite7841 Жыл бұрын

thank you

@IXxK3v1NxXI 2 жыл бұрын

It is there anyway to lower down the volume? i have it and i think is very loud.

@ScubaMade 2 жыл бұрын

Oh maybe, but I’d think just putting some layers of tape over the speaker would probably change the sound. I’d start with that!

@shay1831973 7 ай бұрын

you say u did it on a mitsubishi lancer, i have the same car Q1-did you removed the back bumper there Q2-do you have any photos regarding your installation on the mitsubishi?

@ScubaMade 7 ай бұрын

Ohh it was well before I started my KZfaq channel so I didn’t document it, it was back in 2016, I’m pretty sure I did remove the rear bumper though, but from memory it wasn’t such a difficult job luckily!

@curtisborow6588 3 жыл бұрын

You do not need sensors. When you back up stop when you hit something.

@ScubaMade 3 жыл бұрын

I know you don’t have to have them but I think they’re kinda cool to have! And it was cheap and easy to put them in anyway! Haha 😁

@mitevski9 2 жыл бұрын

@@ScubaMade Do you know what company makes them and also have you had any problems with them?

@ScubaMade Жыл бұрын

I’m not sure what company makes them exactly, there are many different sellers selling them so I just got some that were cheap and they seem to work properly!