I had the same thing and broke the gun down and sprayed some lube back on the recoil spring that the bolt arm fits in back in the stock and it fixed it for me. Just occasionally hit it with some more every time I do a full clean once or twice a year

Thats a good lookin shotgun! in my opinion the BEST looking guns on the market today are the Browning guns in vintage tan. My main hunting gun it bottomland too.

Son in laws Maxus 2 has had feeding issues all year with several different loads and IMHO the trigger sucks on the Brownign. My A400 Plus has had zero failures with about 1500 rds on it, while not as trim she always works. Found your video looking for info on Maxus 2 failures. Good luck with your hunting!

Welcome to the club. lol I got a ton of videos on my channel about my maxus 2

It takes over 100 rounds to break this gun in... I new this before I purchased mine... So its normal just be patient and it should be grand after another few boxes of shells

I have the original Maxus Wicket wing and it’s never have a flaw. I can tell you if you didn’t clean the factory oil off the magazine tube and piston you will have issues. Not saying that’s why yours won’t cycle. But give the piston a really good cleaning. See if it works better. If not. Remington 870

My Maxus 2 hasn’t had any feeding issues and I’ve had it for a year +

It's bec it's a 3-1/2 I hate 3-1/2 chamber I wish browning would make a 3 inch maxus wicked wing I got a maxus 2 as well it needs to break in id pick up a box of 3-1/2 and run that just to wear it in it's short stroking I had it happen to me a couple timed when reloading not shooting tho after a couple boxes it will be fine

I have the same issue. Called browning and mine is on its way back.

My Maxus ll I’ve had for 4 months has had cycling issues every Hunt , rubber inlays in the Fore end and Grip are beginning to peel.

I have heard many maxus one and two owners complain of the same problem. Maxus two seems to be worse. It’s a common flaw and I’m not sure it goes away after a break in period. Would be interesting to hear from Browning.

I recently purchased a Browning Maxus 2. I'm having the same issues. I've sent it back to Browning twice and they can't seem to get it to fail. I had it fail on 3 days back to back waterfowl hunts. First shot fires and ejects. The second does a double feed and the 2nd and 3rd shell are to both jammed. I took pictures and video to show my local dealer. After I got it back the first time i show a box of 2 3/4 and it jammed once. I shot a box of 3in and it jammed 3 times.

Only problem I had was the gun got completely wet frozen, unfroze it the little tiny pin in the safety came lose and makes the gun unable to shoot load so you have to take the trigger whole assembly out then take apart the whole safety setup with springs and pins with a funny shaped clip literally in 25* weather wet and windy it was a 🤬 but other than that I barley cleaned mine the wicked wing bottomland edition in 2years hasn’t failed me at all!!! 2k cost was a bit high but she takes the abuse I treat her like a 870 😂😂

You should contact Browning directly. Normally manufacturers are good about either sending you the parts or having you send the guns back to them for maintenance.

When you will make a new update video?

I bet if you shoot it more it will wear in

it seems that is a common problem on maxus 2 and Bowning connot fix it since many owners sent guns back to browning and get them ''repair it"" but they still have the same problem.... watch this video from another user that may help you fix it