Looks like some tough huntin. Ive hunted Sparkleberry swamp for over 40 years and gotta say, Ive never had it this tough lol. Good vid tho. Its not always about the kill. Sittin there while the sun comes up is priceless .
@ChrisTopher_Browder7 күн бұрын
Thanks. Stanley wins hands down!
@JurgenStroda-rr8zt11 күн бұрын
You really don't know, what your doing with the Remington 58 tear down.
@ironspringoutdoors3 күн бұрын
@@JurgenStroda-rr8zt Feel free then go post your own video. You may do better! It’s not like it’s as simple as an SBE or Maxus.
@35rem1920 күн бұрын
Good video. I shared it on my Remington Model 11 facebook page.
@ironspringoutdoors3 күн бұрын
@@35rem19 Thanks!
@bhecknerАй бұрын
My brother has my uncle's regular 1000. The o ring in gas system went bad,he had no clue what to do.🤦♂️ I like the finish on yours vs the shiny.
@ironspringoutdoors22 күн бұрын
@@bheckner I do like the parkerized version better. The only down fall is that it shows every little scratch and bump.
@bheckner22 күн бұрын
@@ironspringoutdoors it has character, stories for the next generation
@user-rg4dl1oh9q4 күн бұрын
@bheckner There's lots of videos on how how to clean all that gunk in the S&W 1000 and replace it with a water hose rubber washer. I did the same to mine
@coasgaming3860Ай бұрын
I got one a couple years back and I finally took it today. 100% my favorite gun right now. 12gauge birdshot got stuck in the loader and im trying to find out how to take it out.
@ceetwarrior2 ай бұрын
Great video thank you. My rubber gasket is completely dry rotted and brittle. I ordered the one on eBay. Also my extractor is having issues. Ordering new extractor and spring from numrich too. Hope it fixes the issues it's having.
@ironspringoutdoors2 ай бұрын
They are pretty reliable guns, I would say it would probably be a good idea for an extractor spring too.
@francoiswgagnon74102 ай бұрын
Thanks for the video, there's not much info on the SL5. I'm looking at purchasing an SL5 Tactical. Seems a good as a Beretta A300 or 1301, but quite a bit cheaper (in Eastern Canada anyways)... Cheers !
@ironspringoutdoors2 ай бұрын
I could be mistaken but I believe the SL5 defender is a different receiver than the waterfowl. It should still be a good platform, but different than the Waterfowl platform in my video.
@shapsugh18643 ай бұрын
I have one that's engraved, I'd like to ask you if you have it still as I need some help.
@ironspringoutdoors3 ай бұрын
I do still have this S&W M1000Super12 Waterfowler. What are you needing help with?
@pneuma554 ай бұрын
Change your smok detector battery.
@YakMotley4 ай бұрын
Where do you find the O rings?
@ironspringoutdoors4 ай бұрын
I purchased mine from eBay.
@papado57875 ай бұрын
Nice video looking forward to more! There aren't a lot of vids on the sauer sl5 waterfowl! Is the shotgun 1+3 without the plug or is it 1+4?
@richardespinoza62435 ай бұрын
Nice shotgun. What that really is a Miroku arms shotgun. Miroku made this for Smith & Wesson. Take for example Colt had a semi-auto back in the 1960's but was made by Franchi . I also heard Remington sued Miroku because they argued it was a copy of 1100.
@seanobrien42386 ай бұрын
Thank you very much for this information
@wizardofahhhs7596 ай бұрын
That's a really nice shotty, never even knew they existed.
@ironspringoutdoors6 ай бұрын
I definitely think S&W was trying to pull all the stops.
@RDReynoldsOutdoors6 ай бұрын
That’s crazy.
@billy_h_bonney20979 ай бұрын
remington 11, 58, 1100. These are the shotguns I just aquired. The 11 needs a new firing pin spring and firing pin
@fredcapers61619 ай бұрын
Dude wtf if I can't see I ain't got a clue . I'm a novist and got to go to another channel
@brandongillette46219 ай бұрын
Just found your channel. I like it. I’m a old Remington lover. Model 11, Sportsman 48, and 1100 are the stable right now.
@NoName-ml5yk10 ай бұрын
200 lumens makes all the difference. haha
@ironspringoutdoors9 ай бұрын
Yes it does. I need to do another review. I have since went to a 12v HID spot light and it is the best I’ve used so far.
@jeremybridges53388 ай бұрын
Can we get a comparison on the Stanley fat max and your hid spotlight
@OutofSpecStudios8 ай бұрын
@@ironspringoutdoorsreview of the HID spotlight?
@manuelcyr3690 Жыл бұрын
How’s the shotgun treating you now? You still happy with its performance?
@ironspringoutdoors Жыл бұрын
So far so good. After the last cleaning I haven’t had any issues. This season I’m hoping for the same reliability.
@pacob1500 Жыл бұрын
I have the same issue. Called browning and mine is on its way back.
@daviddahl83 Жыл бұрын
That Fat Max is godly
@lukegafa3063 Жыл бұрын
When you will make a new update video?
@ironspringoutdoors Жыл бұрын
I’ve posted a short update video since this video. Check it out! kzfaq.info/get/bejne/b7p4gtWIlt6ck6s.html
@meclay4671 Жыл бұрын
Only problem I had was the gun got completely wet frozen, unfroze it the little tiny pin in the safety came lose and makes the gun unable to shoot load so you have to take the trigger whole assembly out then take apart the whole safety setup with springs and pins with a funny shaped clip literally in 25* weather wet and windy it was a 🤬 but other than that I barley cleaned mine the wicked wing bottomland edition in 2years hasn’t failed me at all!!! 2k cost was a bit high but she takes the abuse I treat her like a 870 😂😂
@vinceedwards3311 Жыл бұрын
I recently purchased a Browning Maxus 2. I'm having the same issues. I've sent it back to Browning twice and they can't seem to get it to fail. I had it fail on 3 days back to back waterfowl hunts. First shot fires and ejects. The second does a double feed and the 2nd and 3rd shell are to both jammed. I took pictures and video to show my local dealer. After I got it back the first time i show a box of 2 3/4 and it jammed once. I shot a box of 3in and it jammed 3 times. Browning called me and started down through their talking points of was it cold outside.... what length were the shells... what was the speed of the shells ... after i shot down all those theories they basically said they couldn't get it to fail. Interesting it has failed for me with 5 different factory loads consistently and they can't get it to fail at all. It's sad that you pay $2000 for a gun and the company won't stand behind their product and make it right. Well Browning as I told yoI rep on the phone i will be selling the Maxus and if my other brownings didn't have sentimental value they would be sold too. I'll never be purchasing another browning product. Sad since i recently purchased a Cynergy and guess what it's history too. Browning needs to get their act together. Decades ago when Remington 1100/1187 were popular you could shoot 2 3/4 and 3 interchangeably with no issue and jams in all kinds of weather. Now Browning advertises a gun as a waterfowl gun that fails and they want to suggest maybe it's the weather conditions or the loads. I don't hunt waterfowl in 70 degree weather nor with only one brand of shell. Admit it Browning, you manufactured a crappy product and you should be making it right with your customers.
@ironspringoutdoors Жыл бұрын
I will say that since this video with a good cleaning I haven’t had any more issues. I cleaned my gas piston really well as well as the rest of the gun. Used Otis dry lube on the trigger assembly, and REM oil in the action.
@thehortons7582 Жыл бұрын
Any source for a carrier latch spring? Just picked up a 58 in 16ga. Thinking of just making my own. Nujricj was $12 but 5he out of stock. eBay has them from $30 shipped to $80. Love these old Remingtons.
@ironspringoutdoors4 ай бұрын
Right off I’m not sure. I haven’t had to source one yet. Would a carrier latch spring for a Remington 1100 possibly work?
@thehortons75824 ай бұрын
@@ironspringoutdoors no sir, two complete different designs.
@ironspringoutdoors4 ай бұрын
@@thehortons7582 then I’m not sure what the solution might be other than finding one where you can.
@chado2575 Жыл бұрын
Where did you find the square o-ring washer? Thanks for the info on the extractor being the same as the 870. Mine is broken.
@ironspringoutdoors Жыл бұрын
There is a seller on eBay selling them. www.ebay.com/itm/264199079712?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ew9WRHGaRWa&sssrc=2349624&ssuid=yWreFz1JQDG&var=&widget_ver=artemis&media=COPY
@530exc1 Жыл бұрын
Thanks for posting a review of this shotgun. I recently picked one up and have found only one round will fit into the magazine. I think 2 should fit. I would appreciate any help.
@guaporeturns9472 Жыл бұрын
Maybe you are putting 3 inch shells in it?
@dougB4454 Жыл бұрын
Very nice review. I bought one in 1980 and never really stripped it all the way down. Good point about the seal. I have a Winchester 1400 that is very similar and I take down often.
@RDReynoldsOutdoors Жыл бұрын
Welcome to the club. lol I got a ton of videos on my channel about my maxus 2
@zatoichi124 Жыл бұрын
I just got my 58 out to clean for Turkey season. This video was great and timely. Love shooting older guns and keeping that history alive. Thanks!
@ironspringoutdoors Жыл бұрын
I’m happy the video was able to help.
@ducksintheskymodel1216 Жыл бұрын
What shells are you using in the ol' 58
@lRickGrimesl Жыл бұрын
Mine won’t eject shells
@lRickGrimesl Жыл бұрын
@@ironspringoutdoors haven’t took it apart yet i said it doesn’t eject but i shot it today and it just won’t cycle it shoots the first shot it ejects but it won’t put the other one in there
@ironspringoutdoors Жыл бұрын
@@lRickGrimesl I would say it sounds like it could use a good cleaning. Don’t forget to check the gas piston as a dirty piston and tube can also cause issues even if the action is clean and lubricated.
@lukegafa3063 Жыл бұрын
Keep it up i bought maxus 1 brand new hope i will have a goodluck with it.
@HMuny55 Жыл бұрын
I had the same thing and broke the gun down and sprayed some lube back on the recoil spring that the bolt arm fits in back in the stock and it fixed it for me. Just occasionally hit it with some more every time I do a full clean once or twice a year
@jamesconnelly3189 Жыл бұрын
I bet if you shoot it more it will wear in
@4492573 Жыл бұрын
I have the original Maxus Wicket wing and it’s never have a flaw. I can tell you if you didn’t clean the factory oil off the magazine tube and piston you will have issues. Not saying that’s why yours won’t cycle. But give the piston a really good cleaning. See if it works better. If not. Remington 870
@georgeefialtis8044 Жыл бұрын
it seems that is a common problem on maxus 2 and Bowning connot fix it since many owners sent guns back to browning and get them ''repair it"" but they still have the same problem.... watch this video from another user that may help you fix it kzfaq.info/get/bejne/rd6khtmInrymn4k.html&ab_channel=RDReynolds as for me i was interested to buy it but i'm not willing to give 2k for a problematic gun, i'm verry disapointed from Browning :(
@craigcaulder8849 Жыл бұрын
Your hunting is like mine, the Carolina grind it's tuff
@ironspringoutdoors Жыл бұрын
It can be challenging. Sometimes these woodies only give you a quick opportunity.
@stevegoulder1739 Жыл бұрын
I have heard many maxus one and two owners complain of the same problem. Maxus two seems to be worse. It’s a common flaw and I’m not sure it goes away after a break in period. Would be interesting to hear from Browning.
@mcafee3604 Жыл бұрын
I’ve had my Maxus 2 for over a year now, and it’s JUNK! I finally stopped using it for anything other than Duck Hunting where I’m shooting 3” and 3.5” shells because it will not reliably cycle 2-3/4 shells. I’ve completely cleaned it 8 times, shot heavier loads and it still won’t shoot 2-3/4” shells without jamming at least once every box of shells. For $1,800 that thing should eat whatever I feed it, but unfortunately that’s not the case
@buckchaser312 Жыл бұрын
My Maxus ll I’ve had for 4 months has had cycling issues every Hunt , rubber inlays in the Fore end and Grip are beginning to peel.
@ironspringoutdoors Жыл бұрын
Well that’s not promising. So far my rubber inlays are fine. However my gun had a scratch and chip on the stock finish and I have no idea what happened to cause that.
@buckchaser312 Жыл бұрын
A few cycling issues I can live with , but the rubber inlays is what really bothers me, why reinvent the wheel wish it was just a textured synthetic stock like the A5
@paullynch6718 Жыл бұрын
It takes over 100 rounds to break this gun in... I new this before I purchased mine... So its normal just be patient and it should be grand after another few boxes of shells
@browningmaxus53609 күн бұрын
Rubbish there is no need to break in a gun I own a maxus runs 100%
@paullynch67189 күн бұрын
@browningmaxus5360 well im after putting over 1000shells through mine still have jamming issues same as lots people who I have been in contact with so explain that...
@stephenstrong119 Жыл бұрын
What??????
@jonathanhornbuilders Жыл бұрын
Thats a good lookin shotgun! in my opinion the BEST looking guns on the market today are the Browning guns in vintage tan. My main hunting gun it bottomland too.
@penshockey5474 Жыл бұрын
Run Lucas oil clp on it clean your gun with that
@penshockey5474 Жыл бұрын
It's bec it's a 3-1/2 I hate 3-1/2 chamber I wish browning would make a 3 inch maxus wicked wing I got a maxus 2 as well it needs to break in id pick up a box of 3-1/2 and run that just to wear it in it's short stroking I had it happen to me a couple timed when reloading not shooting tho after a couple boxes it will be fine
@dereksimmon1551 Жыл бұрын
You should contact Browning directly. Normally manufacturers are good about either sending you the parts or having you send the guns back to them for maintenance.