Very well done,-nice restoration ! I was lucky enough to be given an Emco-Star in nice condition a few years ago, - just needed a few bearings replaced. Had some new sanding belts and bandsaw blades made, and it has been a fantastic machine for modelling work. The guys who designed these were clever buggers. I'd love some of the back end attachments, but they are like hens teeth now.
@gray-mandiycrafts5183 ай бұрын
That's Cool They are lovely machines You must enjoy it.
@sida565 ай бұрын
Thanks. Been looking at you’re video some times while having my machine under assembly and been forgetting how the pieces where fitted :) great!
@gray-mandiycrafts5185 ай бұрын
Only a pleasure I had great fun putting it together
@Penessence8 ай бұрын
Well done!
@gray-mandiycrafts5188 ай бұрын
Thanks
@hj179 Жыл бұрын
Very nice restoration. These are excellent machines.
@gray-mandiycrafts518 Жыл бұрын
Thanks yes thay are
@williamkeily6686 Жыл бұрын
😁I just got the same machine, with planer/thicknesser and lathe. I`ll be restoring it over the winter up here in Denmark. Cheers.
@gray-mandiycrafts518 Жыл бұрын
That's Great enjoy it
@kai-uwefranck60766 ай бұрын
Awesome job, it was nice to see what I need to do to rebuild my machine. The one thing that I see you don't have is the planing machine. Awesome colour you have chosen.
@gray-mandiycrafts5186 ай бұрын
Thanks
@johnwhitley28982 жыл бұрын
Nothing else beats the feeling of bringing an old dead machine back to a new life. Kudos!!!!👍
@gray-mandiycrafts5182 жыл бұрын
Yes true. Thanks
@hj1797 ай бұрын
I have separate Woodfast lathe, bandsaw, and thicknesser machines. Very big/bulky. I would still prefer one of these for small tasks. Everything is located in one place - very convenient and user-friendly. When I was a teen my dad bought me a SkillSher setup comprising of two solid steel bars with two caste ends. It could be converted to a lathe, circular saw, drill press, etc using a large half-horsepower drill as the power unit and was a bit dangerous. Definitely not a toy and not anywhere as good as this machine. Someone put a lot of thought into the design.
@gray-mandiycrafts5187 ай бұрын
Yes l love working with it. It's a bit limited because it's small but handy
@moonwoodworks46072 жыл бұрын
That is truly an amazing job you did in the restoration of that machine. Very nice.
@gray-mandiycrafts5182 жыл бұрын
Thanks
@timandrew45152 жыл бұрын
Nice one. Looks great. Check those circ saw arbour shims again though. That blade isn't centred on the spindle.
@gray-mandiycrafts5182 жыл бұрын
Good eye Thanks I think the blade is not the correct size I do have a table saw so I don't think I'll use it that much
@jckalma79162 жыл бұрын
Great work! I have the same machine, got the Rex planer/ thicknesser to go with it. Designing a designated bench, stumbled upon your vid looking for inspiration.
@gray-mandiycrafts5182 жыл бұрын
Thanks its a great machine having fun with it
@MyGrowthRings Жыл бұрын
Nice work.
@gray-mandiycrafts518 Жыл бұрын
Thanks
@hickmanchawasarira78602 жыл бұрын
Nice work 😎
@gray-mandiycrafts5182 жыл бұрын
Thanks
@13WunZ2 жыл бұрын
Top stuff!
@gray-mandiycrafts5182 жыл бұрын
Thanks
@beardeddronie2 жыл бұрын
Weldone nice work
@gray-mandiycrafts5182 жыл бұрын
Thanks
@thejaptoolguyYT Жыл бұрын
Nice restoration. What paint did you use love that color
@gray-mandiycrafts518 Жыл бұрын
I'll have to look I can't remember the Name. Thanks
@sofiaerzini8026 Жыл бұрын
Hello, great job! is the sand belt/ blades a standard size that is easy to find?
@gray-mandiycrafts518 Жыл бұрын
Hi I had to get the sanding belt and blade made up. Google helps a lot
@ewanrobertson49622 жыл бұрын
Could you tell me which type of blade you used for the band saw please.
@gray-mandiycrafts5182 жыл бұрын
Hi the bandsaw blade is1340mm x 13mm x 4 Tpi I got it at blades world wide Bww@worldonline.co.za
@franktoyer19542 жыл бұрын
where can i get a manual and replacement parts. live in trinidad, the caribbean. have one since 1980, and need to repair
@gray-mandiycrafts5182 жыл бұрын
Hi Manual i got off Google. I live in Johannesburg South Africa sanding belt i got made up at pherd and the v belt was a luky fit. But there is one part for the scroll saw that I'll have to have made at a machine shop
@alfiebiddulph72462 жыл бұрын
Hi what is the bandsaw blade size that fits the machine and where did you buy one. Also the belt sander belts what are the sizes. I just bought my self one and it did not come with a belt for the sander or the bandsaw blade that i can use as a sample
@gray-mandiycrafts5182 жыл бұрын
Hi the bandsaw blade is1340mm x 13mm x 4 Tpi I got it at blades world wide Bww@worldonline.co.za The belts I got at Pherd South Africa I can't remember the size I'll have to get back to you on that
@gray-mandiycrafts5182 жыл бұрын
Hi here's a link to the the manual elcompptyltd.co.za/wp-content/uploads/sites/312/2019/04/Emco-star-manual.pdf
@ENGFREEMAN2 жыл бұрын
Thanks sir, I bought one .. but it needs to rehabulation ... So do you have any links for shopping the spare parts ... Thanks again
@gray-mandiycrafts5182 жыл бұрын
No but if you Goggle you mite find them i found the Manuel on goggle
@ENGFREEMAN2 жыл бұрын
@@gray-mandiycrafts518 thanks ... I got the manual ... But the spare parts 🧐🧐🧐
@gray-mandiycrafts5182 жыл бұрын
I live in Johannesburg the v belt was a lucky find and the sanding pads i got at pherd im also looking for a part for the jig saw on the top of the machine
@arnaudvanbeveren23882 жыл бұрын
www.emcostar.nl
@jacoengelbrecht24202 жыл бұрын
I have exactly the same machine,I would like if you can help with parts,also from SA
@gray-mandiycrafts5182 жыл бұрын
Hi parts are hard to get but the sanding belt I got at Pherd factory shop and the bandsaw blade I got at blades world wide Bww@worldonline.co.za
@jacoengelbrecht24202 жыл бұрын
@@gray-mandiycrafts518 Do you maybe have an email to contact you please