This is my first time commenting on one of your videos, but I have been watching for a while and I think you are truly skilled. The motivation for this comment was about the rate you charge for your time. I think your specialized knowledge is worth significantly more than the upper end of the range you mentioned. As a general IT guy over ten years ago I charged $120 a hour and I think you are worth more. The market you operate in may not support that, but I wanted to say you should make sure you get payed what you are worth.

its so cool that your wife helps you with your projects 🙂

I would still love to hear a demo of the music that you make!!! I think a lot of us without VPNs would.

God KZfaq is such a shitshow. Amazed that 3D scanner is ONLY $1,000. That's an insanely powerful tool! Sadly, can't watch the demo video 'cause some other country has told KZfaq I'm too American for their music, and I can't visit the link to the product because it's listed as a malicious tracker. Good job, Google! Such a user-friendly experience!

I asked a friend to print your Hexibase for me. These projects are so neat and feasible for some with actually obtainable tools. I can't wait for the wife to approve of my own tools.

It's pretty cool you are still doing this. You designed a box for me back in 2011-2012 maybe and it BANGED. Was on a TFS Ultra I think it was called. Pretty cool you can do what you're doing with smaller drivers now. Absolutely love it!

BAAAABE! NEW HEXIBASE VIDEO DROPPED!!!

Man sub box was awsome dang someone will be able make a lot cool stuff for people or their self with that. A car audio shop could kick butt with that. Great video

Awesome SUB Design, My Compliments ! !

it's nice to see talent at work

Brooo the intro on your videos gets my ears tingling

I have been waiting for this video for ages!!!!

That note at the end explains the video being re-uploaded.

This is amazing. I remember back in the day when I had a box made for my Buick Sundance. Took up the whole trunk. Two 12” gold ohm symbol pioneer subs with a single port. Man it sounded good and man I miss it haha

Omg you're still alive! Glad to see another vid from you 2. Take care. 😎👍👍

Ah just clicked on the "old" notification, and video was gone. Seconds later there's a reupload. Very nice timing for me specifically, thanks 😊 Edit: After now watching it, obviously I know why now. Honestly splitting out the demo part is probably for the best anyway.

It's situations like this where I desperately want to justify getting a scanner like this. It feels like the counterpart to the type of manufacturing we have today (3D printing, cnc, lasercutting, etc). Also, this sub design is absolutely stellar! Love the little TCP115 woofers. Using 2 of them as midwoofers for my desk.

Holy that companion video... Dude thats insane!!! wish you could do those boxes for cars. would be killer to do a hideaway in my camaro!

Insanely awesome tech

I stumbled across this channel when wanting to know about 4th order 6th order boxes ect. This one I liked also . Very interesting. From Iowa.

bad ass! i LOVE it when stuff fits perfectly...

nice work man! that scanner would be fun to play with..

That 3d measureing tool is awesome

Had to VPN to Australia to get the demo video to work without being region blocked. First one I tried that worked

Great job as always!!

I’ve thought bout this before and u brought it too life great idea for my Lexus Rx350 some 6.5 sub great job n we need more vids Pete

This is what I have wanted for so long for my car but no one does this locally

I was completely unaware that a device like this was available. I will definitely be purchasing this.

Excellent car audio project. If you can create some kits for Tesla, BMW and other popular cars for audio mod, you could easily convince lots of owner like me to either buy the plan or the kits to upgrade our audio system. It's more convincing than some of the specialist speakers kit without any audio measurement.

I came thinking this was a new fishing cooler system for boat.... stayed for the cool tech

i heard you say missouri...i am also in mo...kansas city are...tooo cooool

Another great build! I look forward to the design details that you do so well, especially why those drivers in that "complex" enclosure vs other alternatives. Each triple of drivers wired in... parallel?

I like the build, don’t remember did you say the box volume sizes, as well as port length? Or driver model. Dang it, might watch it again! lol nice work, keep it up.

Damm that’s dope!

That is so freakin' dope.

So skillful 😎

Looks amazing and fits like a glove! I really wanted to hear a demo though. :(

Here i was initially thinking this would be great for making complex curved beauty panels, like for top and sides of wall builds.. didnt think about an actual box... pretty cool.. really thinking outside the box..... pun intended. Thanks for the vid.

Very cool

I would like to get a hold of the blueprint to this box,,, awsome video as usual Pete🎉🎉🎉🎉🎉

You’re too skilled for youtube.

THAT STEALH BOX WAS FIRE! 🔥 IT SHOULD BE CALLED THE NINJA HEX 🥷🏼

BIY(Build it Yourself) channel also reviewed it. Scanned their custom DOHC Ford V10 Lincoln project.

Ugh... the level of knowledge and tech you put to this makes me feel completely inadequate. TEACH ME YOUR WAYS SENPAI. I want amazing, effecient bass in my Miata! lol

Dude, you're a dang good professional. ?Just a idea for you, Custom subwoofer enclosures designed specifically for Toyota Tacomas, for example... =D The market's begging for them - the options out there are either too pricey or just not up to scratch. With your skills, you could fill this gap and make some serious cash. Count me in as your first customer! Cheers to revolutionizing car audio!

It has a learning curve like all things. It took a while to sink in how to do multi part scans with it. And those can only be merged in RevoScan5 anyways. Also do your self a favor and be generous when deleting scan defects before you merge.

Pretty cool that you are in Missouri to I'm in belton. We have a decent size car audio seen here.

KZfaq needs to change its logo to facepalm😅. The amount of work you do always amazes me. Totally underated this channel...

You got skills, i love your videos

Never disappoint hex gold standard.

I would love to come work in your workshop.. building boxes in the 2000 for friends was always kinda the same, ported or sealed.. now with such precision making a box fit is not that hard, just have to have the right tools to work with :) I i dig your work!.. I need a box for my vega 12" that wants to go in my G37 but it takes up too much space with the standard box.. so it sits for now!

3D is one of those final frontiers for hobbyists to build things only OE's could accomplish just a few years ago. Also another series of what's in my hatch should be forthcoming. The CRX pounded with small subs.

Random. What ever happened to your older uploads? I just remembered something I went to check out and your oldest videos only go back 5 years.

Thats a great use of that space, I couldn't catch the name of the finish Sophie was applying!?

at 8:28 you had some kind of 'flocking' or quite possibly just foam glass cleaner to detect the angle of the windshield to keep down reflectivity. What exactly did you use?

I have a video request, I have two subwoofers called the tymphony lat 500 and 700, I'm curious about your take on the sub and setting it up. Love the videos! 3D printing and bass two things I love!! Makes this channel amazing to me!

Looks dope af my guy, well done. Takes me back to the 90's when I did a stealth four 12in JL Audio sub install in my 1993 Ford Escort GT. Well, it was visually stealth. Physically I had no storage space lol. I don't have a VPN, sad panda. I was looking forward to making my AT closed back headphones, being driven by a Schiit Magni+, vibrating my brains. Have you considered using Rumble as a YT alternative for things like this?

Would be interested in seeing how you reference the 3D mesh in Fusion 360 or in Solid Works. I have always struggled with combining the 3D models with the sketches and modeled bodies.

I WANT A BUILD BY YOU!!!.. but I can't afford $5200/ hour.. not in the slightest 😆 🤣 😂.. awesome videos bro, you're a true master and genius at your craft

2:18 you legend lmao

Wish I could hear it. This stuff fascinates me.

love your videos!

I been looking for a 3D scanner like this, but waiting for them to be more hassle free than the ones I was seeing. Not sure if this is that much better, or if there is something like this for cheaper. But I really need something when it is useable without being a pain in the ars.

I wish i could purchase some of these finished products!!

Man I wish I had time but I work crazy hours just to pay for the fun shop toys I got

To drop bottom without bottoming out.

Nice! But sound treatment is needed.

make demo recordings available somewhere via the cloud for people who want to hear what it sounds like.

Amazing😮

So...as one of those people who bogarted the entire space under my SUV cargo floor and installed a downfiring 12-inch "pancake sub" with 14.5mm xmax in a sealed enclosure with plenty of DSP on tap, you have me curious...I would want to see what you would do with a "pancake sub" and your design expertise to maximize its performance without having to add bass boost or anything to enhance low frequencies.

How loud does it get? :) I'm always wondering about the spl levels on others builds

I need a VPN to watch the demo of this.

Well this answers a question I'd been wondering about. Whether spending the money to get a 3d scanner just to scan the area behind the seats in my 2015 Miata, in order to provide those to you would be helpful for you. I'm really hoping that I can get down to around 30 hz without sacrificing what little usable space the car has, and this gives me hope, lol.

Демо работает с впн на Францию, на сша не открылось, так что смотрите какую страну выбрали Как обычно, классная работа :)

I was in the hay day of loud deep base car stereo days of the early 90's. Lots of linear 5002's, rockford fosgate and literally tons of others on play. I've built systems that have gone to iasca soundoffs nationally mostly using kicker double stitched competition speakers in either isobaric, vented or passive radiator arrangements(popular then). I built and enclosure in place inside of a 75 vette stingray with 4 10" comp kickers and a 600 watt amp that kept breaking off the rear view mirror while driving. I miss those days even tho most music was metal and pop rock. Another system i built made a friends car sound like it had a radical cam in the engine from a block away as he came down the cruising strip playing the intro drums for hot for teacher(van halen). Those were the wild west days of stereo and speaker design that was so fun.

I wonder if the LiDAR on the cellphones will do the same for measurements.

This is why copyright is useless. Well the jokes on them. Now I wont know who they are. Good job lol.

WOW!!! That sound AMAZING!!! And only 200 watts??? How do you have them wired??? And is the amp in 2-channel or mono? (I doubt it but 4-channel? lol ) I'm just wondering all the detail because you said the speakers were 4-ohm and I it's not very often you can run amp in 6-ohm... well I guess I should say older high-wattage amps from the 90's..... at least that was what I had experienced on 3 different amps trying to run 3 x 2ohm speakers... they would all just shut off as soon as the bass hit..... Yea there are different classes of amps, but I don't know very much about the technical side of it all... which I am SURE you are VERY fluid in :) yea... now that think about it, my little tiny home amp I got just as a little substitute for running my VERY HOT Onkyo 7.2 receiver ... and I THINK thats where I saw the manual say "16,14,12,10,8,6,4,2,1 ohm stable" - I was baffled!!! But it's some VERY CHEAP 30 watts x 2 + 100 watt x 1 Chinese no-name amp that I've had running for about 5 years now, and we ALL know how truthful those specs can be LOL ..... ANYWAY, I am IMPRESSED with your little setup.. except for 1 thing :( - You REALLY should have painted the inside of the box.... LOL .. yea no one is gonna look at it, but WE DID... and it really doesn't look good.... what if you wanna show it to someone??? bah... it's no big deal :) And I'm still impressed

The Companion video was RESTRICTED because she said SH_T within the first 40 seconds of the video... thats funny.. I JUST got done explaining this to another channel!! LMAO And I haven't brought this up since I learned about it like 4 months ago... and now TWICE in the same day!!! LOL So yea... General Rule = NO FOUL LANGUAGE IN THE FIRST MINUTE (just to be safe) after that you can say whatever you want..... VERY STRANGE! - You should try it again just to test it out and see if I'm right or not.... and this way we don't have to go to Italy just to listen to your music LMAO :D

How come you use those KRKs over your desk when you design badass speakers for fun and profit?

I wish 3D scanners and a half descent 3D printer could be had for like sub 500$. By the time you go and get a shit ton of tools its gonna cost you roughly the same anyways plus the possibilities are endless with a scanner and printer. You can easily design just about anything you need for any application and just make it happen on a computer. IMO for car audio its almost a must especially if you want to go and do something really custom and fancy. Having those 3d scans is so valuable. Maybe your next video should be a budget friendly 3d scanner and printer combo video and you try and use it to idk make tweeter mounts for an a pillar.

Amazing Do you build for other people and if so where are you located

HexiBase El escaneo 3D,con el Revopoint MIRACO,no he visto,q fabriquen una caja para paralante, imprimida a forma del interior de la puerta del tu vehículo,esperomentando mediciones q,tanta diferencia hay con una puerta insonorizada u si,logras parecidos resultados obviamente el parlante expuesto afuera,sin regilla oem de lienso exterior

The port looks small. How is the vent velocity when you push the woofers?

but doesn't it bang!

2015 Chevy Sonic and Cruze ive worked on a few of them that is not what I would call reliable by any means the coolant system is more fragile than the crappy plastic BMW uses the check engine light is always on because the many sensors they use are junk and the timing gears are not keyed ive seen one with 60k miles and the valves and pistons were making sweet love

Revopoint vs einstar?

My last car had 3 18s and hit 152db on music and I was just curious about small subs to get loud and move wind you would just have to add a whole bunch of them to increase the cone area ?

The "companion" video is already down 🙃

Man I watch this thinking we were going to get a sound demo, nice build tho.

Commented on the video that was removed, but TLDR of the question: Would an iphone be good enough for the 3d scanning? as they have lidar and can be had for like 200eur used (or less)

Do you also rebase music n sell sticks

How do I get in touch with you for a design quote

I would love to see how a 3D printed speaker made out of flexible filaments would perform. They are available from really soft 60A to hard 98A. But I'd imagine the softer ones would absorb sound more. Maybe worth a video? 😍☺

Hi. im curious to know what model is your cnc machine?

My man... did you say you change $5200 an hour?!!

oh no, demo video already blocked

Fun Fact: A used Chevy Sonic or Chevy Spark when involved in an accident are almost always totaled if the airbags are deployed, the cost of airbags + repair is usually more than the value of the car.

This is awesome. Very talented. Could have saved soo much material by using a single 10" shallow mount in that sane space though. Or even 2. -I know that isn't the point, but. Man the waste

I’ve been looking at 3D print scanners to do similar car audio builds. I thought you were going to just 3d print the box. Laser cutter to make the box in mdf even better I imagine for the sound. I just don’t like the price on that scanner, do you recommend a lower priced scanner?