Revving the Mud Wagon's 600HP Monster to the Max

No video

Revving the Mud Wagon's 600HP Monster to the Max - Carcass S1, E7

Рет қаралды 120,429

Күн бұрын

The Carcass team prep the Willys cab for a hefty chassis, and give the undercarriage of their military ambulance a lift with some suspension upgrades.
Check out the PowerNation store for shirts, hats, and more: pntv.us/lnk_f8a...
Want to watch POWERNATION completely ad-free? Subscribe at the link below and receive the first month for just 99 cents:
pntv.us/lnk_3d0...
Follow POWERNATION Everywhere:
www.powernation...
/ powernationtv
/ powernationtv
PARTS USED IN THIS EPISODE:
Eaton Corporation: Eaton ELocker
More Info: pntv.us/pn_pt_1...
Permatex: Permatex Red Threadlocker
More Info: pntv.us/pn_pt_1...
RockAuto.com: Rock Auto - Leaf Spring Shackle
More Info: pntv.us/pn_pt_1...
Supplied by Summit: Richmond Gear - Ring and Pinion Install Kit
More Info: pntv.us/pn_pt_1...
Supplied by Summit: Skyjacker Shackle Bushings
More Info: pntv.us/pn_pt_1...
Supplied by Summit: Summit Racing Fuel Cell
More Info: pntv.us/pn_pt_1...
Supplied by Summit: Yukon Gear and Axle - Drive Flange Kit
More Info: pntv.us/pn_pt_1...
BDS Suspension: BDS Suspension Lift with Nitro Shocks
Matco Tools: MATCO Tools are the Official Tool Supplier to PowerNation
The Industrial Depot: Tools, Hardware, Shop Supplies

Пікірлер: 90

@mikewhite3123 3 жыл бұрын

Was a machinist for about 10 years and I'm liking those drill bits lol looks way easier than standard bits..

@kickinwinghotboi883 3 жыл бұрын

"Careful not to let it come crashing down" Let's it come crashing down

@edwardott7239 4 жыл бұрын

Loved that Pat from Engine Power explained the method behind the dyno runs. I've always wondered about this part of the process.

@keneshacoates-dixion9877 4 жыл бұрын

Rebuild a c223 engine please

@albundy8052 3 жыл бұрын

Tall & narrow it will roll over in a stiff breeze. Buy two trucks, throw away 90%.

@DanReynoldskb9jlo 4 жыл бұрын

Why didn't they replace the hardware on the spring shackles? Seems like a no brainer...

@justinworkman9980 4 жыл бұрын

Why would you put a blower that big on a small block

@DustinDoesStuff 4 жыл бұрын

Looks like the u-bolts aren't long enough, they only thread half way up the nut.

@pekelosilveirajr7461 3 жыл бұрын

Yeah no brainer on the 1300 dollar locker lmfao

@feltondyer2960 4 жыл бұрын

You drilled a hole in the housing, wwill that leak out the differential lubricating fluid?

@strikermed 4 жыл бұрын

The plug has a rubber gasket on it, so it won't leak fluids.

@TheCapitalVice 4 жыл бұрын

When are you guys gonna do a torque monster Buick Nailhead build?

@bigslim492 4 жыл бұрын

I agree with the guy who said the body still isn’t sitting correctly, but I’m thinking the rear axle needs to be centered in the wheel well

@zarkeh3013 4 жыл бұрын

I don't like how almost all of the jeep is tossed, but I do like where this is going.

@1000machz 2 жыл бұрын

That is sad

@coolHandLuke5150 4 жыл бұрын

Should have done a shakle flip

@kenwelch198 4 жыл бұрын

Wasted not one, but two good 4x4s.

@mikewhite3123 3 жыл бұрын

Yeah like they could have just built both trucks...

@davidnichols1363 4 жыл бұрын

With that hole in the pumpkin ;unless you seal it , everytime you go in the mud or water you contaminate the gear oil. You didn't mention any sealant or wire boot ; that would be an expensive replacement or change the oil everytime.

@jordanwright5430 4 жыл бұрын

Good catch, man.

@swhit 4 жыл бұрын

I was wondering about that too

@JingleBop 4 жыл бұрын

At 5:57 you can see the plug for the hole on the wires. The shoulda mentioned it. I would put some rtv on it as well to be 100% positive

@permafrost2064 4 жыл бұрын

Pat: "this makes me grin large" *frowns*

@aaronburratwood.6957 4 жыл бұрын

My dads had two of these back to back. The first one was a stock restoration and the two door is a 350/350 combos on a newer pickup chassis.

@frankyalvarez7160 4 жыл бұрын

What if you did a complete engine build. Cheap vs expensive parts?

@Bricklinsv1970 4 жыл бұрын

Carcass is a killer Metal Band ;)

@miguelshady842 4 жыл бұрын

Great grandioso programa

@ivanmitchell3876 4 жыл бұрын

👍,great show.build something uncommon.

@elayhohnson2536 4 жыл бұрын

Only 600hp.? You can get this hp today in a grocery getter!!!!

@bluegrassman3040 4 жыл бұрын

Yeah, they are afraid to throw power at stuff.

@bmstylee 4 жыл бұрын

They broke it once. So they may be gun-shy to give it the beans.

@mikewhite3123 3 жыл бұрын

Junkyard 6.0, ebay turbo kit.... Way over 600 lol

@vortec9311 4 жыл бұрын

Y'all are working in that nice shop with $100k in tools, but you don't have a chop saw table or even a couple jack stands? Just cut shit out and let it drop ? Ffs

@sirjamesthenerd 4 жыл бұрын

Guys what's up with the sweeping cuts scenes? I'm getting motion sick watching this...

@albundy8052 3 жыл бұрын

It's also a waste of time. When the video had more time, looking at the two goof balls and one minute of video time on the running engine SMH.

@42Goopy42 4 жыл бұрын

No sealing the diff? Either gonna splash gear oil out or water in. Really hope they sealed that off camera

@leviwilder1205 4 жыл бұрын

these guys are butchers and hack jobbie pros.. started with a perfectly fine MILITARY vehicle chopped it up and placed another military design ontop of it. for the time and energy wasted they could have started with a war time willys or a powerwagon and ended up in the same spot with half as much effort

@Angel_the_Bunny 4 жыл бұрын

I've never seen someone bounce around so much while talking. Looks like this guy is standing on a trampoline every time they do a close up.

@OzarksWildman 4 жыл бұрын

I’d be like...why the hell is the crank pulley smaller than the blower pulley?

@KPearce57 4 жыл бұрын

Overdriving the blower.

@FerasAlhawas 4 жыл бұрын

OzarksWildman they wanted to decrease the boost so bigger pulley=lower boost

@xkobeplayz5396 4 жыл бұрын

K.D. Pearce Underdriving*

@andyclemente4205 4 жыл бұрын

I was hoping way more then 600 ho

@tphvictims5101 4 жыл бұрын

How many gallons of hair gel did you go through in this episode ?😉

@Shahska1 4 жыл бұрын

Why would you make it higher you all ready need a freight elevator to into the dang thing

@kattcasel9730 4 жыл бұрын

The sponsor said so!!

@Kevin_747 4 жыл бұрын

About 11:00 amish Mike got a good start on a beard walking from the 4x4 shop to the dyno. Another cringy script and some cool parts.

@thecman26 4 жыл бұрын

Good eye to catch that! He goes from freshly shave to a weak beard in just a short walk to the dyno. Dude can grow some facial hair fast!

@johnstephens7697 3 жыл бұрын

"The Cringe Is Triple C Strong With These 2" "The Cringe Is Triple H Strong With These 2" If You Don't Know????? "Triple C Cringe=UFC/Retired Fly/Bantom Weight Champ&Gold Medal Winner At Olympics In Freestyle Wrestling" "Triple H Cringe=WWF/WWE Became CHAMP Of Banging Vince McMahons Daughter" Well "If You Don't Know?" "Now You Know!" 😂😂😂😂😂😂

@BelowAmbient 4 жыл бұрын

Yeah Dynoing is super challenging LMAO

@bmstylee 4 жыл бұрын

"I'm not going to let you hurt it." We've already done that once.

@StraightLineCycles 4 жыл бұрын

What camera do you guys use

@Mr.Safety. 4 жыл бұрын

I have a challenge for the carcass team

@charliesybert2683 4 жыл бұрын

Rebuild a 1950 Ford f1 and put a Chevy 302 in it then use a 4x4 f150 4 speed transmission with front axle and gearbox then stiffen the suspension and do rust work

@alexyo3927 4 жыл бұрын

In the intro you said you save left for dead cars, but both cars looked far and I mean far from dead beforehand. Love the show tho.

@25slim82 4 жыл бұрын

You got to expect from the newer generation .

@kenwelch198 4 жыл бұрын

Take two perfectly good 4x4s and hack them into one weird looking one.

@matthewtroiano3024 4 жыл бұрын

You need to look at the camera like you are talking to the person who is watching. It is like being ignored while you have a conversation with someone else. I dont care much for carcass because it is not personal it's like look at me do stupid shit.

@darrindouglas1 4 жыл бұрын

so many arm chair warrior keyboard critics........don't watch anymore episodes then....problem solved........

@elizabethbitc9579 3 жыл бұрын

Exactly It's almost like they are watching something they don't like on purpose, just to get mad

@johnmirbach2338 4 жыл бұрын

😁✌🖖👌👍😎very cool

@allianceofsteel 4 жыл бұрын

thing was already ridiculously high, then another eight inches.. that thing will be eye candy only.. and unusable.... for most things.. sad they ruined it....

@ericlarkin6563 4 жыл бұрын

This is a bum show, why can't we have a show about working on cars and trucks! Bring back the old show.....

@angmoore985 4 жыл бұрын

How much y’all want to rebuild my 2v 4.6 lol

@basshead. 4 жыл бұрын

ewww

@angmoore985 4 жыл бұрын

basshead to each is there own

@basshead. 4 жыл бұрын

You should step up your game, bro.

@angmoore985 4 жыл бұрын

basshead that’s not my only whip? I’m in Southern Indiana I’ll meet you at edegewater motor sports park n show u my game gates open at 1 on the weekend.😂 you simp