I successfully built and rode my first 2 stroke this weekend and I don't think I would have been able to do it without you! The addiction levels quickly rose the moment I managed to get this bad boy running. I'm hooked and you are awesome! Thank you.

I think that chopper fit the young guy a-lot better, awesome build-n-great video guys,😉👍, thanks for sharing.

Hey Tony, thanks for this content. I recently came across a2005 Schwinn stingray occ chopper also with a 100cc engine kit. Kit needs work and the seat was Harley style rigged with springs on the rear of it. However, I ran across an exact replacement of the oe seat. I was happy it fit in that day seat post tube! Problem now I have is a lock down clamp for either and any sweat for this Cali chopper

I'm a chopper fan and a bbr fan, but why not build it with a built in frame fuel tank? That would definitely help a lot for a lot of people, and would look good..as well. Also like to add, I love how you run without the air filter, down a dusty driveway..

Looks good 👍

you already know my thoughts so ill just be nice and say great video . thanks for sharing . your the man .

If you use with chain guard with spacers out I used u bolt brackets and the pipe I heat stock and bring up and I go through Carr hardware and carquest for parts that fit up..

Great video makes a nice build overall also when you stated mod the heck out out the 80cc like you all do anyways I felt that lol

Berry, im going to install one of your motors on to my e bike. On the rear wheel i see the sprocket and the bike disk brake. Did you install an adapter or is the sprocket engineered to have a disk brake mounted? Kinda new with this topic. Thanks!

Interesting!

i not got a stinger but it looks simular i got 450mm hangers but my exhaust comes down the frame and goes out the back bit of chop and weld and it fits like a glove

Great vid

I want to buy a 79cc 4 stroke from y’all but do y’all sell a bike to fit it

Those are good disc breaks odd I bought a Schwinn sidewinder a couple months back for ten dollars and same rims and breaks like that. I have Jessie James chopper and I built the back out longer and did something similar and put rock shocks in front forks

How do the original pedals not spin with the back tire spinning from the motor and the chains are hooked up to the original pedals and the other chains are hooked up to the motor? Is it because the motor has a clutch or how does that work? Without spinning the original pedals and chain lol I'm wanting to make my diamondback drifter a motorized chopper

Would a predator 212 fit in this frame?

Will bullet train engine kit fit ?

Hello friend, did do yall do worldwide shipping? Btw nice ride 🤘

WHAT WOULD THE BIKE COST ALL IN ALL

Could you put a 4-stroke on that bicycle if you wanted to from bikeberry 49cc

An ape hangers an a shifter for the gear coming up to shift

doesn't make any sense to mod the heck out of an 80cc engine, when you can show-horn in a 212cc Preditor motor on the stingray much cheaper and have more than enough power?

Where do I buy the seat y’all have?

Just curious if the bullet train engine would work the stinger,

I have arthritis in hips also

Can we get a full sized chopper 😢

What sort of speed are you getting Tony?

ever thought about porting your engines

An a chargen system for my phone with usb

Try 100cc with dual spark head. That would be dope.

Hey toney put a pit bike motor on one like a mini bike

An two exhaust pipes

why don't you install the bullet train engine onto the Stinger bike frame

🤣💯👍👍👍

Hello sir how are you I from india I am interested your work you doing good job sir i am also motorbike machanic bicycle I have 10 years experience of machanic 3 years experience of Saudi Arabia sir do you have any job for me thanks you sir

im 6 feet, think I could fit on this bike lol

But on mine i want a banana set with a sissy bar that comes up

Put a 212 on it

Phantom eighty five v three

did you lose the air filter during the ride or there is just no air filter in the kit?

Kick an or electric start an biger carb an some iron cross mirror s

Way off Off track. lets see, I'll save the pennys I find around the ground, and?? I have no freaking clue!.?. wish upon a star and research this bicycle daily and thru the night till my wife gets upset with me and all i want todo is research more and stare upon this.perfect bicycle that i could mount my stage 4 engine to so perfect its like a plug in play so perfectly fit for it. Welp enough sad storys thanks for this bike i will not buy one no mater how hard I try and pray its.impossble for me now but i promise ill be up day and night looking on how to possible.build my own. See wife already yelling at me thanks again perfect bike for this engine.

But it need to be made for someone six ft three

An iam a senior on disability

Your "storage bag" is just a woman's purse without a strap.

Kids bike for sure but peddling is a chore as I see his knees are at his chin on the upward stroke. Kids are not 4 feet tall which you would need to be to fit comfortably on this design So just wrong on about 7/8 of your pros. On this bike. Effortless? Wrong. Powerful, wrong. Too small, yes. You would need a back rest to push backward to peddle at all. So uncomfortable looking. Body does not fit the bike ti use as a bike. And the seat has to be raised In Order to ride the thing. Which takes away from the low rider style look to begin with. Also in order for any bike to be actually designed for any motor they would have to be made heavier, stronger and have a place to put these motors instead of strapping them to the frame with bits and bolts. Obvious by the long winded promo post here this is actually an advertisement for bike Berry. If they did make the bike for an engine the chain guard would have been in the way, and muffler pipe would not be an issue on any motor. Gosh I can’t stop about the cons. Too many to list. Motorcycle frames dont have chain restrictions. Or w just problems. Yes I know it’s not a motorcycle. But it’s not a bike actually made for a engine. Exhaust a problem!!! Chain problem. Riding this and feeling like you are going to fall off…it’s just too much. But after all this said. Please rush to the cart as he says and start ordering all the parts you need! Go now before they are out of stock. I’d buy one just to prove that everything said is bull#~{* oh, but great effort. I do like the dual disk brakes. But if the rear is mounted to frame it will never be adjustable to where it lines up as needed. It’s gonna be a terrible fitment issue. Trying to adjust the wheel to work with the fixed hardware. Unacceptable. Too many issues. Dangerous. Buy at your own risk.

Thank you ive been struggling outta work for 2years .? How ?? 😮‍💨🤯🫨🤕 Anyways, the way that 2stroke 66 80cc engine fits. 👏🎉👏🎉 I've been debating on what bicycle to use, on mounting my stage 4 kit to. I have one Schwinn sanctuary 7 step thru (heard) havent tried. (It wont work.) Have the 26" Kent Glendale (Green guy) "nickname? I dont know" 7speed . I have pieces of a Huffy Sanford Men's 26" possibly buy parts to finish that one. Also, pieces of Huffy Casoria Mens 27.5" also could buy parts to fomish that build last two cane from ebay its been 1month and actually! 1month and 1week today trying to get the bicycle I bought in whole for my collection of bikes options were none! still no refund 4bikes in and not one not one, with all the parts to be fully assembled.