FINALLY Refretting And Pleking My 1963 Strat (Full Process)

No video

FINALLY Refretting And Pleking My 1963 Strat (Full Process)

Рет қаралды 91,599

Күн бұрын

Check out the links below for Glaser's site's
► Music city bridge - musiccitybridg...
► Glaser Bender - www.glaserbend...
► Glaser Instruments / glaserinstruments
Get My Free Rock Guitar Course - robertbakergui...
►My Guitar Lesson Packs - robertbakergui...
► Check Out My Second Channel / @tonequest1535
►Sweetwater Affiliate- imp.i114863.ne...
►Thomann Affiliate - www.thomannmus...
►►My Studio Gear:
Hosa GTR-210 : imp.i114863.ne...
Furman M-8x: imp.i114863.ne...
Focusrite 18i20: imp.i114863.ne...
Twonotes Cab M: imp.i114863.ne...
Eventide H9 Max: imp.i114863.ne...
Live 6 HX effects: imp.i114863.ne...
PRS CE 24: imp.i114863.ne...
Friedman Vintage T: imp.i114863.ne...
Friedman Cali: imp.i114863.ne...
Friedman Vintage S : imp.i114863.ne...
Orange Rockerverb 50: imp.i114863.ne...
Two Notes Torpedo Live: imp.i114863.ne...
Revv Amps D20: imp.i114863.ne...
Revv Amps G20: imp.i114863.ne...
Friedman BE 50 Deluxe: imp.i114863.ne...
Fender Esquire : imp.i114863.ne...
Danelectro 12 string: imp.i114863.ne...
Yamaha HS7 monitors: imp.i114863.ne...
JBL Monitors: imp.i114863.ne...
My Studio Desk : imp.i114863.ne...
My Computer : imp.i114863.ne...
►GEAR LIST: www.amazon.com...
►RECORDING GEAR:
Lighting: amzn.to/3qjpRUM
Vocal mic: amzn.to/3tVheBH
Camera: amzn.to/3am1joy
Lens: amzn.to/3tUIFvy
The links above are affiliate links, where I earn a small commission (at no extra cost to you) if you click the link and purchase an item. You are not obligated to do so, but it does help support the channel!
►FOLLOW ME
/ robertbakerguitar
►Find My Music HERE - urlzs.com/H88hx
►Business Inquiries
support@robertbakerguitar.com

Пікірлер: 455

@reddsshaker3477 Жыл бұрын

I’m a luthier by trade, and I was commissioned to refret a “one owner” ‘56 Strat. Customer’s ONLY requirement……”do not touch one spec of the original aged finish on the fretboard”. 😬 I approached the job with surgical precision, extracting each and every original fret with extreme care. I followed up with a perfect refret AND new bone nut, lightly aged to look original. Looked like I was never there. Needless to say, my customer was beyond happy…..he was genuinely emotional. It was actually his Dad’s guitar since new. ❤️

@sgt.grinch3299 Жыл бұрын

I respect an artisan of any field. It takes knowledge, passion, and respect to be good at any craft.

@nathanward3888 Жыл бұрын

This was a cool story. Thanks so much for sharing.

@ParaBellum2024 Жыл бұрын

I'm _not_ a luthier, and refretted my Telecaster myself! It didn't go as well as it could have done, but although the end result looks poor, even from a few feet away, it plays an awful lot better than before. I would never do this to someone else's guitar! He was wise to bring the Strat to a proper luthier.

@fernank017 Жыл бұрын

@nikonmikon8915 11 ай бұрын

Where at? Someone such as yourself doing the most for the customer is RARE. I'd trust you with my guitars if what you're saying is true!!

@ToddSnyder-up8jx Жыл бұрын

Nick is my wife’s son. We are so proud of him! Thank you for such a great video! Job very well done

@edvinnoren503 3 ай бұрын

No way! He's my wife's son too! Small world!

@disco4535 Жыл бұрын

That was so awesome of Nick to allow Robert to come in and record everything and explain it all. Really cool guy

@jannik19191 Жыл бұрын

I mean, it's the best advertisement they could wish for. If you're this good, the work you do really speaks for itself.

@samright4661 Жыл бұрын

@@jannik19191Exactly!!

@bluzzjazz Жыл бұрын

I had my 67 Strat refretted once and it has held up great. Later on, I had my 72 Goldtop Deluxe refretted. I lost the nibs but it was a small price to pay for a great playing guitar. Aside from the refret, it's completely stock and an awesome guitar.

@andrewbecker3700 Жыл бұрын

Therapy session complete. I think almost anyone can appreciate seeing a refret done firsthand. SWEET!

@CorbenEdward 3 ай бұрын

One of the best refrets I have ever seen on YT. This guy knew his stuff and shared things nobody else has.

@seanrosedotcom Жыл бұрын

My 1984 MIJ E62 Strat I had worn completely down, the board was wrecked with divots and needed flattened. The guys at Casino hooked me up with a luthier and I got vintage sized stainless-steel frets and I have never looked back. It made a barely playable guitar one I will never part with. Do it if it needs it. I could not be happier with how it turned out.

@landofahhs_1 Жыл бұрын

I'm not sure if you are braver, more foolish, or just enthusiastic...the last time anyone touched my 69 tele thinline was 1974 in Orange California, since then I've cherished every crack in the original finish and every mm of the original maple neck and it's original frets. It was abused by the original owner and I've felt like a caretaker ever since I purchased it for 150 bucks at a pawn shop while playing in Vegas... I'm 73 now and that guitar is still my favorite...it will stay, as is, until I pass or something extremely terrible forces me to modify it. To me, part of my tele IS it's age and that feel, as well as the sound...like me, we get older and our bones may be stiff but both of us get more and more unique and defined with each passing day...something I prefer to live with. Thanks for sharing. PS no suggestions for Nashville last time I was there the cheap bar owner only paid me 20 bucks so I left town after the gig.

@BurekOne 24 күн бұрын

Yeah, well, you know, that's just, like, your opinion, man.

@dparrigo Жыл бұрын

Refretting by a talented luthier is like getting a brand new guitar...only BETTER. My wife had my 1972 Yamaha acoustic refretted at Emerald City Guitars in Seattle back in 2006 for a birthday present, and the result was soooo good. They leveled the fretboard, filling in all the ruts I'd worn in it over the years. Installed new frets. Replaced the nut, and it played like a dream...still to this day. The fretboard edges were "rolled" from years of playing, and just felt so comfortable in my hands. I love this guitar and the work just extended the life.

@stanphillips7277 Жыл бұрын

Nick was such a nice dude huh Rob? He let you geek out and watch him while he breathed new life into that Strat that's older than you (and me). He was such a pro, I'm glad you made a new friend. Guitars and friends, 2 things you can't have enough of! ✌️❤️🎸🎶🙏

@hankevans7890 Жыл бұрын

I prefer guitars to friends.

@FretLevelMidnight Жыл бұрын

"It will be mine, oh yes, it will be mine." - Congrats, man, that looks flat out dreamworthy, jealous, but more than anything happy for you. I recently had my 2000 American Strat (had for 23 years now, bought with my childhood fastfood job) refretted with fatter/taller Jescar stainless steel frets, and a nice dark tine on the maple board, it's breathed a whole new life into that instrument. This however, this is truly special.

@PaulLGuitar007 6 ай бұрын

Had my 99 Strat and Gibson Les Paul Standard re-fretted at Sweetwater with Stainless frets. Pleking was part of the process and those guitars are soooo smooth to play. It's been almost 2 years and there are no signs of wear. Best decision ever.

@buffdoc46 Жыл бұрын

When I had my 63 refretted, it was like electricity being invented lol. So much better than wore out originals

@deltawhiskey1398 Жыл бұрын

I live 2 1/2 hours away from Nashville....but I make the drive to Glaser's whenever I need anything done to my guitars. Those guys are pros and I have always been happy with everything they have done.

@TheStrykerProject Жыл бұрын

Purty, shiny new frets! Thanks for sharing the process, too. I really do enjoy watching luthier activities like this, too.

@stuahlers1528 Жыл бұрын

Go to The Pharmacy! Beer, brats and everything in between! My go to in Nashville!

@alexcurtis173 Жыл бұрын

I’ve been following you for some time and have to say your new camera quality/editing is on point. Great work! Always love watching your stuff.

@rickjohns689 Жыл бұрын

Both of my main guitars, a 2003 and 2007 Axis, are on refret number 3.

@Low.Key.Music01 Жыл бұрын

I had my guitars refretted at Bronson Guitar Works in Scottsdale. Those guys brought my guitars back to life

@brickmonkeyvideo2150 Жыл бұрын

Therapy session? I thought I was the only crazy one! Even just simple maintenance does it for me. Every time I change strings I am polishing frets, cleaning up the fret board, polishing the body. OMG it is the most relaxing/zen thing ever. 45 minutes of total relaxation. And then the best part is that when you are done, your guitar is in fantastic shape and ready to rock again.

@CadeDeakin Жыл бұрын

I live in Nashville, there are a ton of good restaurants, but these are 3 of my favorites! Maiz de la Vida for Mexican (either the food truck or the tortilla shop), black dynasty ramen for ramen, and beared iris for beer!

@rogerploch1251 7 ай бұрын

I’ve been going to Glaser instruments since 2018. Great group of guys, and i always learn something new walking in. Great video Robert!

@MegaHomie4life 9 ай бұрын

What a beautiful guitar ❤

@ERAPOSORESERVA Жыл бұрын

You’re such a nice person, Robert. The offer to Joe was lovely. Next level cinematography as well.

@krotma Жыл бұрын

I had a vintage Les Paul Custom refreted. It was a little scary and it was really expensive, but now it plays like butter. Totally worth it even if the guitar would have been worth more with the original worn out frets!

@jerel-akilmyles9675 Жыл бұрын

Nick is THE GUY!!!! I take all of my guitars to him. Glaser Instruments and the gentleman that work there are outstanding!!!!

@capitalmedic Жыл бұрын

Joe’s guys did a plek on one of my teles and it made a huge difference. They are great. I’d recommend ML Rose for a burger place with a lot of beer options. As for downtown Broadway area I would recommend The Stillery. Go upstairs and it is more chill there. One of the best wood fired pizzas I have had.

@guitarthink Жыл бұрын

You're the man... As I was watching I was thinking Robert should be giving Jim a call out. And at 14:25, there it is..... Much respect to you, Sir!

@waynehicks1969 Жыл бұрын

I had a 52 reissue telecaster fender Japan refretted, reradiused, pleked, neck refinished and new bone nut installed. It transformed the guitar in the best way. So awesome.

@thebigleone1066 Жыл бұрын

I used to get my guitars plek’d at Westwood Music in LA. If you are near a music store that has the ability to plek your guitar, don’t hesitate. They play so well after the process. Maybe Robert could talk about getting his 63 strat plekd at the difference he notices.

@grantbob Жыл бұрын

Cool video Robert, thanks for taking us along for the journey.

@mwrable Жыл бұрын

So many players have not experienced a great refret and set up. Once you find the fret you like and have a talented tech/luthier do the work you will never go back. You will be bringing all your guitars in. I used to have any guitar I purchased automatically refretted to my specs. Too many players expect this type of magic out of the box.

@shawnmartin4701 Жыл бұрын

Nick is a master of his trade. Top notch work for sure.

@G60syncro Жыл бұрын

There's this guy on KZfaq, his channel is twoodfrd if you're not aware of him and in one of his past videos he addressed the issue of having vintage guitars refretted or any work done to them. Basically his stance is "Cool, you have a pre-war Martin but the frets are shot and the action is like 1/2" tall... That's just a wall hanger!" ...get the work done and get that piece of history playing again!! Like Nick said here, if he'd put the original type fretwire in there it might have made the guitar unplayable to you, you have to make these choices sometimes and it's fine!! If you're into this type of nerdery, twoodfrd is great, he's soft spoken, really chill and does fantastic work. A great channel to watch while doing mindless chores or working in the shop and having that as an inspirational backdrop. He also shares information about how the guitar gets into those issues. Sometimes an instrument might feel just a little off but you put up with it and then a few years later you end up with a bellied top or a crooked neck that could have been an easier save then.

@stevewarren4813 Жыл бұрын

I had my 77 Les Paul Custom re-fretted around 1999. The frets were absolutely flat. That is some really dark rosewood on your baby. Nice!!

@kevinking2468 11 ай бұрын

Oh my gosh, I had the very same thought about saving the frets!

@chadjones4236 7 ай бұрын

Guys that can revive an old instrument like that are heroes 👍

@ryanwalsh2455 Жыл бұрын

They did a stunning job. The biggest thing that scares me is when people sand down the old rosewood fretboard. Glad to see they didnt need to do that with yours!!! I have a ‘66 mustang with original frets, and theyre gettin downnn there. Frets out a lot past the 12th fret. I’d absolutely love to have the same care put into refretting my guitar as they put into yours. Great video!

@jfo3000 Жыл бұрын

This might go without saying, but have you tried straightening the neck on that Mustang? Excessive relief can cause fretting out in the upper register. Just trying to help.

@huskiesguitarsrockandrolla5881 Жыл бұрын

I've been in Nashville for 11 years. Party Fowl in Donelson is great for Hot Chicken. China Cottage in Rivergate is some of the best Chinese Food and Robert Plant has been known to stop in periodically. Liz's Kitchen in Goodlettsville by City Hall is a great Meat and Three. I'm originall from Ohio too. Welcome.

@billyarbrough291 Жыл бұрын

Really cool video. I could watch this type of guitar repair stuff all day long.

@alanpecherer5705 11 ай бұрын

If your Strat has the original frets and they are worn down to near nothing, yes, a refret will definitely change the feel. And if you install contemporary frets which are generally much higher than the originals, even more it will change the feel. I don't know what you or anyone else can do about it. I've had vintage Strats all my life but 10 years ago got a Strat-plus which has much taller, contemporary frets. It took a little time (couple of weeks) to get used to, but the guitar plays much better than the old ones, is a lot more resonant (could be just that one particular Strat) and "gives back" more. It sings more. It's true that the new Strat doesn't quite have the feel or vibe of the well-worn one, but on the other hand, the satin finish on the back of the neck sticks a lot less than traditional lacquer and even bare, worn-down wood. Stays in tune much better than crappy Klusons. I obsessed over old Strats for 35+ years. Today they don't do quite as much for me.

@dlmyrs Жыл бұрын

Beautiful guitar. And awesome job by Glaser. And totally not weird to keep the old frets. You can make something with them I hope.

@CA10Z 10 ай бұрын

I'm liking the open grain and old school clay fret marker dots. That Strat ooozzzes tone and sucess....

@trapperj4077 Жыл бұрын

Love the Eric Johnson “Trademark” there at the end. Congrats on the refret. Hope it plays well for you.

@mattmarcz7574 Жыл бұрын

I bought a $99 clearance 335 style guitar from guitarfetish that was unplayable on arrival. I went and had it plek'd and setup. Now it has such low action that while my strat was in the shop for a month, it took me a week to stop muscling the 335 to play it, and it plays/sounds amazing, especially for what I paid for it. Easily compete with an Epiphone. Got the strat back, it's simply amazing now. Robert if you're ever in southern California, I'd love to hear you play my strat to get your opinion on it.

@waychunky Жыл бұрын

Saving the frets was awesome!! I was thinking that watching the video so I was so happy at the end that you did it.

@msmith2016 Жыл бұрын

Sweet - I Had Nick refret my '60 tele last year and it is phenomenal.

@SatanClaus69 11 ай бұрын

Beautiful work! Was a pleasure to watch a skilled craftsman make easy work of an otherwise terrifying task.

@jordanlamb1907 Жыл бұрын

I had my father's '63 p bass refretted at 12th Fret in Toronto Ontario. No problems, they did an amazing job!

@ScottfromBaltimore Жыл бұрын

I hear you on the ASMR tiip. I just get happy seeing frets made all shiny and precise!

@eric_in_florida Жыл бұрын

Such a lovely dark RW fretboard, love it.

@andypearn7199 Жыл бұрын

The exact video I also like to see. Thank you so much Robert. I'll be putting the few guitar nerd friends onto it. The whole Plek idea has always scared me but after watching this I want my 67' Custom Tele with original totally worn out frets refretted & Plekked by Glasers. Pity I'm in Nashvilliquin (Deniliquin) Australia 😩

@stevelamb6720 11 ай бұрын

Excellent job!!!!

@waynepayne864 Жыл бұрын

all this knowledge he has about things i cant even imagine noticing reminds me why i could never be a luthier. its crazy he knows how much backbow he comes from wide fret slots like that makes perfect sense but also god damn how many did u have to do to notice that. kudos the knowledge this guy has hes a true master

@larrypower8659 Жыл бұрын

You need to trust whoever is doing your refret. If you don’t have a luthier you do trust, do your due diligence. Ask players you know and respect who they use and/or recommend. Networking like that is important. If you do have someone you trust, everything will be fine. Counting the original frets, my ‘66 Strat is on its 4th set. I refretted when I got it (1984), and it’s had two more fret jobs since then-three refrets in total-and all is well! The guitar I’ve had longest, a ‘69 SG Special, has been refretted twice. I’ve also had the nut changed on both guitars. My guy is terrific, with a great reputation. He cares about instruments and gives you the straight story. That’s what it takes to feel comfortable with refretting a cherished guitar.

@regis839 Жыл бұрын

This video was so satisfying to watch. Sounds like they did a great job.

@kevinandmandywinter8436 Жыл бұрын

What a great shop . I made living repairing and building guitars and I would have loved to work in this shop .

@jeffpodrug8942 Жыл бұрын

This is awesome!! Never had it done, but I've been thinking about taking my first guitar which is a 1980s Peavey T-60 lead. I know what everyone is thinking. It's junk, but not to me. It still feels so good in my hands. I must've gotten a good quality one. You can laugh, but the serial number is 001973. So I'm pretty sure they scraped making guitars. Years ago I bought this and my band mate Larry loved it so much, we went right back to the music store and he bought the same guitar only his was Woodgrain Gray and mine was White with Black pick guard. We got it back to my garage and we couldn't even keep it tuned. He immediately took it back, and I actually felt a bad. Like it was my fault. But it was just a bad guitar. Don't know if it's worth doing, but I'm gonna find out. Thanks for letting us watch this phenomenal process. It's something that I could never do. Wish I lived in Nashville, but I am an owner operator trucker so maybe I can have him do it. Later from Wisconsin!🤘💯🎸

@jamiesdetailingden6620 Жыл бұрын

That rosewood board is just amazing!

@cosmocalypse3708 Жыл бұрын

I reached out to Glaser's but they only deal with big time clients. Ended up finding a guy in Georgia that refretted a couple of Gibson's and did an absolutely fantastic job.

@jakesMisc 10 ай бұрын

This is just a lie. They deal with just about anyone. Misinfo at its finest.

@cosmocalypse3708 10 ай бұрын

@@jakesMisc I was told explicitly "we aren't taking outside work."

@jakesMisc 10 ай бұрын

@@cosmocalypse3708 I have no idea where that comes from. They are taking new work all the time and I know first hand. Sounds like maybe you didn't wanna wait or you were being difficult 🤷‍♂️

@cosmocalypse3708 10 ай бұрын

@@jakesMisc I called, asked about a refret and was told exactly what I said above. No mention of time or pricing or anything. Why would I make up a story about something so trivial?

@jakesMisc 10 ай бұрын

@cosmocalypse3708 I don't know but your comment was roughly 2 months ago and I personally know of totally regular, non famous people who have sent guitars within the last 2 months and got work done and are waiting on work to be done. Refrets, benders, etc. I feel like there's more to your story. Just sayin....

@Facedrummer12 Жыл бұрын

I’d love to get a refret on my new-to-me Gibson Studio HP. It’s got all the great modern specs I love paired with the tiniest little frets I’ve ever played with. Some Jescar evo gold jumbos would be sweeeeet

@TheGuitarMan8670 Жыл бұрын

Just wow. Excellent work and the plek on top...outstanding

@shanewright9735 Жыл бұрын

Awesome video! I have done a few of my own refrets, but it's nice to watch a real pro at work and to see their process.

@corporalrich Жыл бұрын

Thank you so much Robert!

@50Something Жыл бұрын

Congrats! Looks like you brought it to the right place! It sounds heavenly btw❤

@jeffyoung8726 Жыл бұрын

An amazing process Robert... "But this is why I subscribed to your channel?" This guy is very good at what he does! Thanks for posting this video Robert... ✌

@MichaelSorensen-bl3ec Жыл бұрын

And I should also say that this is one gorgeous Strat. Mint pickguard, clay dots, and it sounds fantastic. Nice vintage patina without looking like a relic. Enjoy it!

@JHPRS Жыл бұрын

As soon as I saw your old frets all pulled, I thought, I'll bet he's gonna keep them. :)

@troybradley8647 Жыл бұрын

Very cool man excellent service

@mbenn8168 11 ай бұрын

So soothing watching craftsmen...

@richarde3378 Жыл бұрын

I love watching repair videos like this. Thanks! :)

@j_freed Жыл бұрын

Dressing down taller frets sounds exactly like what Guitar Clinic Hamilton did for my friend's Bill Nash T-52. BSBG Friend didn't love it after but for me it's perfect. So this is my main guitar now. 🏆

@clearcoat Жыл бұрын

I had my '64 es-335 refretted by James Hood Guitar Repair in Escondido, CA. They did a great job. No regrets, it's a huge improvement in playability.

@scottdunn2178 Жыл бұрын

What'd they charge?

@clearcoat Жыл бұрын

@@scottdunn2178 I think the refret was 400. I had other things done, too, including a new nut installed so I paid a bit more..

@scottdunn2178 Жыл бұрын

@@clearcoat Yeah, I was thinking $300 or so would be the going rate. A bit more if they're dealing with binding, etc.

@j_freed Жыл бұрын

Thanks for keeping guitars alive! ❤️ Not some unplayable collectible.

@AlexVegaGuitar Жыл бұрын

Love these kind of videos and it's cool to see you doing one! Came out looking great!

@theriffwniksevigny5473 11 ай бұрын

Great work buddy!

@kirk-b-patrick Жыл бұрын

Awesome production on these new vids! You're a great player and seem like great dude. Nice going!

@concretel10n Жыл бұрын

My #1 is due a refret and I can't quite bring myself to drop it off. I don't blame you for being nervous.

@AdrianBoisclair Жыл бұрын

that's freaking awesome that he already knew about getting back-bow from the frets bing slightly wider than the slots... I never even considered this ... but it makes sense!

@omega1845 Жыл бұрын

That is a very clean looking 63 Strat

@DenmarkVea Жыл бұрын

Great vid! Thoroughly enjoyed it!

@atbear Жыл бұрын

Very cool video. And, congrats!

@lexzbuddy Жыл бұрын

Great video, interesting. Enjoy !

@fabienbourdier9847 9 ай бұрын

this guy knows his stuff

@Viper_75th_RR Жыл бұрын

That guitar is a rare gem. Enjoy it!

@shepherd8203 Жыл бұрын

Your a good dude. Most of your videos that comes off look me you are but wanting to sent frets to the OG shows you care about people.

@1st_Proof Жыл бұрын

My vintage original 1955 Les Paul Standard Goldtop was refretted at Glasers and it plays amazing. I played a Suhr Aura that was a phenomenally smooth playing guitar & that Goldtop played every bit as good. Great choice!

@diarrhea_splatter Жыл бұрын

This was a great video 👍

@koonsickgreen6272 6 ай бұрын

haha that guitar deserves the best of everything. Plekking and refretting etc can feel kinda expensive when you compare it to the price of one's guitar. But the historic value of a 63 as well as the fact it has been with us over half a century really meaningful.

@bluemawks Жыл бұрын

Very cool Mr Baker, over the past couple of months I completely refurbished my '90 Fender Squier HM IV neck thru. This included having to replace one of the EMG's, doing a half soldered and half plug in system to make the old 5 way switch work. But the hard part was I did a complete refret with jumbo stainless steel. It turned out awsome, I didn't even need to level the frets after I installed them. Man those fret ends are like a bag of razor blades when first installed! They were down to .030, now a fat .058 =D. By the way, my first ever do myself refret. =)

@michaelr.4878 Жыл бұрын

It is crazy to think that when Leo Fender designed his guitars with the bolt-on necks, he intended the necks to be disposable. His vision was that if a player wore out the frets on the neck, they would just buy and then bolt a new neck on. hehe. That is biggest piece of proof that Leo wasn't a player. It is remarkable that he was able to design such wonderful instruments as a non-player. He obviously did a lot of studying and talked to some really good players about what they wanted and what worked. I am not a Fender guy at all...but I have to admit, they are great guitars for the peopel that dig them.

@robertdyer8517 Жыл бұрын

Cool vid man

@curtissmith2180 Жыл бұрын

Great video bro,and welcome to Middle Tennessee ,I live in Gallatin,there is a little place on the square called Swaney Swifts.I think you and your family would dig it .

@GRBAquatics Жыл бұрын

Very Cool, Thankyou. So interesting seeing the process. Nice Work. Cheers

@NoNameNo.5 Жыл бұрын

Tones in the hands and Robs got eeeem! Sick work

@FernandoRR66 28 күн бұрын

I don't know if it's because of the optical effect, but it gives the sensation that the first and sixth strings are too far out on the fretboard, in some parts of the video, and the last frets seem to be even outside the fretboard. I insist, it may be because of the optical effect, but it gives that sensation. Beautiful guitar :)