Agreed but then they’d also have to manufacture links and shocks and all that.

@gedrickwilson that's where they need to partner with Arrma, Losi, tekno, etc. But I'm in. I would buy one

EXB by M2C I’m buyin that all day long

Thanks so much Brother Avery 😜. Felt awesome to get Big Girl out again. I took an 8s break after tweaking my back again recently. The brace pins did absolutely Epic!!! Can't thank you and Mitch enough for pushing the limits of possibility with these Beasts 😍. So grateful for everything you and your pops are doing. 🍻🚀🚀😎💪👊👊

Thanks so much dear Kimberly 😍. It's been a joy experimenting with this awesome platform 🤗. Huge thanks to Mitch and Avery for their masterful expertise to push the absolute limits in performance and durability 💪. It's a matter of time before they offer ZRS 8s shock caps. Big thanks to Ian for his ramp engineering skills and wonderful BBQ grill skills too 😱🚀🚀😎💪👊👊

Thanks so much Brother 😜. I've heard great feedback about the Leo 1050 and mixed feedback with the HW 800 👍. So many potential combos and gearing setups to choose from. Happy to hear yours is so smooth 👌. My 5898 isn't bad, just feels kind stiff or notchy during subtle corrections. Truly appreciate the kind words Brother. Bash on 🍻😎💪👊👊

Hey Bro, what esc are you running with your Leopard 58113 1050kv? @bashaz

Thanks so much Brother Chris 😜!!!! You were right about the lack of smoothness with the Leopard 👍. Lots of power, just rough on the starts and throttle/brake inputs. I tried everything adjusting the settings, but still felt notchy and difficult to control. HUGE thanks to Mitch and Avery for transforming such a Killer platform 😍. Can't wait to see your Hobbystar 850 👀. Stuck at work right now 😝. So many great affordable power options with Hobbystar!!! 🍻🚀🚀😎💪👊👊

Awesome videos!! Trying to build the kraton 1/5 exb the right way from the start. I'm getting the truck next week for my birthday, super pumped!! With the Hobbystar 850kv what is the best esc set up and a solid servo? Appreciate your help!

Thanks so much Brother 😜!!!! Super impressed with your bumper supports 👍. Great design with the perfect amount of flex and rigidity to absorb to absorb nasty direct hits. 🍻😎💪👊👊

Thanks so much Brother 😜. I'm pretty addicted to Big Girl 😍.

@@richduperbash2966 Same here man! It is literally my favorite💥

Thanks so much Brother John 😜. Had such a great time at the lake!!! Big Girl was due for a overhaul no question 🤗. Glad I got the bulkhead and mount sorted out. Got a lot of use out the stocker, but things got squirrelly with that busted hinge pin and stripped D block 😱🤣🤣. No more Sidewinder action. Can't wait to hook up again Bro!!!! 🍻😎💪👊👊

Thanks Brother 🤗. Couldn't agree with you more 👍. Such wonderful bashers 🍻😎💪👊👊

Yes indeed Brother 👊. My neighbor is running that setup and it hauls ass 👀. I certainly might try it sometime, only turn off is price. Definitely seems very efficient. Appreciate the detailed feedback 👊. Cool temps, connectors ... etc...are a win win with big power 😎💪👊👊

Thanks so much Harry 🤗. ARRMA took on a huge project with the 8s line and did an incredible job 😍. Such an original design with incredible detail in the engineering. Dropping a proper 1/5 system in along with upgrades just takes it to another level. 🍻😎💪👊👊

Yeah I've been on a wrenching and maintenance hiatus 🤗. Also jacked my back pretty good. Getting better each day. 🍻😎💪👊👊

Thanks so much Nick 😜. Mitch and Avery are more than willing to take our suggestions for different upgrade options 😍. Their new CNC machines have literally opened the floodgates for steel goodies!!! The hardened brace pins + 7075 brace ends are perfect for hardcore bashing 💪. I was busting stock ends and bending pins basically every bash until now. Love the Hobbystar motors too Brother!!! Really appreciate the kind words as always. 🚀🚀🍻😎💪👊👊

Thanks so much Chris 😜. Yeah Ian's idea for the ramp was bold, but worked Killer 😱. Makeshift engineering to the max. Those alloy I-beams are strong with proper bracing. Tell your little guy I said hi 🤗 🍻😎💪👊👊

Thanks so much Brother Aaron 😜. I'll admit I like swapping tires and set-ups 🤗. The Prolines are brutally fast with incredible control. Just not that forgiving on really tattered or gravelly terrain. Still love both options. The EXB 8s tires balloon like Crazy, but that's actually helpful in potted rocky sketch spots. Both motors are very powerful and worthy, just harder to do corrections and subtle, smooth throttle changes with the Leo. Ian is a gifted engineer with his ramp set-ups and even custom CNC parts 👀🍻😎💪👊👊

Thanks so much Brother 🤗. I always hope some of the set-up info proves helpful to others. So much trial and error experimenting with these rigs. Never imagined I'd love the larger scale trucks 2 years ago 😍. Such a different experience. Shout out to my buddies for another awesome group session!!!! The food was the real highlight 😋😎💪👊👊

@@richduperbash2966 I know for a very long time now I've always looked out for your videos that explain your set-ups, it sure is a great resource and gets me very close to the configuration I need. There are some obvious differences due to all the extra parts you run from m2c and the like, but in general they are pretty close. My k8s is very well m2c endowed, but not to the extent of driveshafts and brace ends, but all the underpinnings are upgraded, I'm still running the original shock rod and piston upgrade, before they went to the new size shock rods. I've been waiting for the local shops to get the heavy duty camber links and tie rod ends, but, they are always out of stock. At least in the last 5 runs or so I haven't broken anything major, just a bolt on the steering, which was an easy fix. If I could sort out a few more things it would be near perfect. Have you ever worked out a way of removing the slop in the servo saver, I've got the m2c support, but the mud guard doesn't hold it all very well? Thank you for taking your time to reply, it really means a lot to me, it must be such a huge responsibility for you and we are very grateful for you sharing your time and efforts with us all.

@@jonowillmer thanks so very much my friend 🍻. That's awesome to hear your K8s is dialed in with the underpinnings 👌. That's truly the key to customizing.... finding out what you need for your terrain and bashing style 😍. That's part of the reason I didn't go full beefcake build early on with my EXB. I took the upgrade as I go (as needed) approach. I will say the EXB shocks and camber links (rear especially) were massive upgrades 💪. Lucked out and found a set at my LHS I'm finally putting on my O8s. PS.... you also need the inside EXB pivot balls ARA330747 to make the EXB composite ball cup ends fit ARA330744. You might consider ordering the ARRMA HD EXB 8s servo saver spring. It definitely helps take some slop out of the saver assembly itself. I hear ya on the mudguard area. These heavy ass rigs absolutely need a saver, but there's gotta be a better way to lock that puppy down. There's inherent play in the current design no question. 🍻

@@richduperbash2966 thank you so much Mate! I'll definitely be checking this all out. You're a lifesaver, I really do appreciate it!!!

Thanks Brother 🤗. Suspension setup and clean landings are very important with these huge Beasts 🍻😎💪👊👊

Thanks so much my friend 🤗. Had a Blast out there solo and with my good buddies 🥰🚀🚀

Damn I'm jealous. At work all weekend. The TLR Typhon looks awesome 😍

@@richduperbash2966 it’s definitely nice, had to go through the diffs though…

@@CoachD386 tuning and customizing is where the real fun is at 🍻🤙🤙

@@richduperbash2966 indeed

Thanks so much Brother David 😜. Had such a great time with awesome friends and delicious food 😱🥰🥰. Ian's ramp set-up is a Blast!!!! Happy to have my 840kv 34/34 set-up borrowed from my RTR 😍. Decided to simplify and focus on my EXB 8s and O8s. 🍻😎💪👊👊

Thank you Brother 🤗

That's awesome Pete 😱. Yeah my 980 got damaged and was on backorder when I opted for the Leo 5898. It still runs, but the endbell is stripped and leads got yanked out of the casing pretty badly. Shouldn't happen again unless I wreck nose first into a 500lb boulder again 😂

@@richduperbash2966 lol you definitely put that motor on the map compared to hobbywing and castle...i love it. And i haven't practiced air control yet so i won't be sending Betsy near boulders anytime soon lol

Thanks so much Brother Eric 😜. So sorry about the storms and lightening. That's some seriously scary stuff, especially with it knocking your power out 👀. I literally just ordered a replacement for my damaged 980 😂. Unfortunately my 840 is making a clicking noise and I don't think it's the bearings. Pulling it apart tomorrow to check the rotor and magnets. 33/39 should work out nice with solid connections and good packs 👍. She's got killer mid-range and top end 😍. I really love both motors with the right gearing. Thanks so much for the kind words Brother. So glad the brutal heat has let up here near Sacramento 😍. Hopefully we'll finally get some rain again. It's literally bone dry here 🍻🚀🚀😎💪👊👊

Thanks Brother 🤗

Thank you so much dear Brother 😍. Highest honor possible coming from you Thomas 🥰🥰🤗. So very appreciated my friend. Hope the weather holds and all is well!!! 🍻🚀🚀😎💪👊👊

Thanks so much Brother 🤗. Truly appreciate the kind words. M2C is a blessing for harder bashing 😍. Not sure if you've tried using Mugen Seiki E0206 planetary shims. I use them in all my RTR/standard diffs. For V4-V5, simply replace the existing ones with them. I think the wider diameter does a better job of supporting the entire gear surface and pin. The gears have less room to rock in the cup under rotational force. I keep the stock external outdrive shims. Some guys use hardened drill blanks or order pins from McMaster Carr. 🍻😎💪👊👊

@@richduperbash2966 -always😁 I will try those shims now. Have not had planetary gear issue but, if these shims save pins I will do it. So awesome having world class bashers like you to talk to😁, Thanks again for the support bro👍😎

Thanks so much Brother 😜!!!! I'd love to make a trip down south 😍. I'm off that weekend, but it's our anniversary and my wife would probably ramp up a honey do list from hell if I went 😂

@@richduperbash2966 Haha! Tell her its a beach! Beach Bash Anniversary! Tell her they will have a crawler track just for her!

Thanks so much Brother 🤗. Happy bashing 🍻

Thanks so much Brother Mike 🤗. I'll be dropping your fans on Big Girl if needed, but she's running great with this setup 👌. Keep up the awesome work my friend!!!! 🍻😎💪👊👊

@@richduperbash2966 Thanks my friend and appreciate the support 👊👊💯💯

The BBQ was John's idea and it was a Blast Brother 😱!!!! Definitely gotta hook up again soon Bro. Ian's ramp set-up is fun as heck too 🚀. We're hoping to do another one once it cools off. Let me know when you want to hook up. 🍻😎💪👊👊

I use Hobbystar brutal torque 70kg 6912 servos. Just need the larger ARRMA servo support and you have to shorten the servo saver set screw about 3-4mm to fully close the servo saver assembly. See my older Kraton 8s EXB build video 🤗 a.co/d/d06IYud kzfaq.info/get/bejne/eZiWl72i3ai2m4k.htmlsi=4rYxcxH5Sn--2WbC

Thanks so much Brother 🍻😎💪👊👊

@@richduperbash2966 welcome brother..your videos is awesome every each time💪🏻

Thanks Dustin 🍻😎💪👊👊

LMAO 😂. The trusty old sledgehammers got so many uses 💪. Really appreciate it Brother 🍻😎💪👊👊

Just had my first run with it in the 08s yesterday 😱. Definitely has good power. My Hobbystar 56112 980 had more overall though 👍

Great question Brother 🤔. I think Thunderoos and Gamechanger RC both have great options available. 🍻

Thanks Brother 🤗. Had a Blast testing this shock setup. 😎💪👊👊

Thanks so much Al 🤗. Happy bashing Brother 🍻😎💪👊👊

@@richduperbash2966 thanks bro, but u say that lol im goin to film my Oct jump challenge today which could end badly as I've never done a front flip b4 lol so 🤞 it works out 👍😉👊

@@richduperbash2966 omg u have just made my day to have u as one of my subs and to b my 100th sub is a epic achievement for me so thank u so so much, its very much appreciated brother 👊😉👍

@@BIGALSCRAWLERS you bet Brother 😁. Best of luck with the jump challenge. Hit the jump straight on and don't wait too long to hit the brakes upon takeoff for front flips.They take practice no question. 🍻

@@richduperbash2966 u r a true legend brother thanks for the tips ill give it a go 👍😉👊🤞🤞🤞

Thanks Brother 🤗. I need to add a build list in my vid description. 🍻

Thanks so much Jordan 🍻😎💪👊👊

Thanks so much John 🤗. The Prolines are fantastic tires 👌. Super fast with incredible control. Just get a bit bouncy compared to stock on rocky and really rough terrain. Ballooning helps smooth out nasty, pitted up landscape. There's no perfect tire for every terrain and taste. I like to keep switching off between 4 different tires. Still love the Duratrax belted and Outcast 8s Backflips 😍. They all have unique handling and qualities. 🍻

Thanks so much Andy 🤗. I bought those about 3 years ago from Discountramps.com. Unfortunately, I think they've been discontinued. They pop up on Walmarts online store, but I haven't seen them available in almost 2 years now. These have nice curve for only being about a foot tall and are quite durable. Mine are starting to take a beating with the heavy 8s rigs 😂. I haven't found a comparable replacement anywhere online. Here's a link to what I'm using. They were on sale for 100$ for 2 at the time. www.walmart.com/ip/2-Pack-Skateboard-BMX-Freestyle-Ramp-to-Ramp-Launch-Bundle/37532850

@@richduperbash2966 Thank you so much! Of course there's a website for discount ramps 😂😂. I'll give it a look and see what Walmart has too. Really appreciate the link and info. I've been going through the make or buy debate in my head and this is really helpful

Hey Bob 🤗. Much appreciated Brother. Not sure if Gary is doing much RC. Think he's doing more 4 wheeling and riding side by sides...etc 🤔. The Tekno outdrives should've just been released on the M2C website. 😎💪👊👊

@@richduperbash2966 thankyou for the info,and i use to like his you tube channel, and bashing r c trucks.

Thanks so much Brother 🤗. I honestly enjoy both about equally. The Outcast might be more wild fun overall though 😎💪👊👊

Probably depends on the gearing. I think the electronics are decent in both rigs. 👍

I usually stick with 80 weight M2C pistons and ZRS bladderless set-up. You can experiment with heavier of course, but I wouldn't go any lighter personally. 🤗

Thanks so much Michael 🤗. Think I ran 30/47 gearing with good results when I ran the HW 5687 1100 in mine years back 🤔. Really depends largely on wheel size, desired speed, and driving style. I honestly prefer the 56112 size motors in the heavier Kraton. They have far more torque with better heat efficiency. Lots of great motors out there, but the Hobbystar 840 and 980kv are the best I've ran for price and performance. 🍻

@@richduperbash2966 Thank you so much for that info. I think I will run a different setup on my rig. Cheers Rich. 🍻

Traxxas 🤮🤮 a company that Sue's their competition, and can't even update their products consistently.

Thanks so much Brother 🤗. If I ever get an XMaxx, it'll be to help test prototype parts for Mitch and Avery. I don't have anything against the truck, it's the business practices behind the company that is questionable. 🍻

@@richduperbash2966 Right on man. Thanx

I just add a couple black rubber O rings on the shock shaft under the pistons so my pistons aren't slamming the shock cartridge on the inside. Not the classic form of droop setting of course. Some guys use limiting straps or wires. It's a bummer RPM didn't design a spot for actual droop screws in their mold. 😎💪👊👊

No doubt Brother 😜. This was my buddy John's idea and it was a Blast!!!! My only regret later was not using some sunscreen 😱. Definitely having another burger bash soon. 🍻

Holy crap 😱. Long time no talk Brother!!! Been wondering if you were still bashing. The K8s EXB is an awesome rig. Just have to keep her size in mind. She's a Beast with proper power 👀. I'd recommend the Hobbystar 56112 980kv and Max5 with around 32/39 gearing. She's definitely durable. Better with M2C chassis, but can still take a hammering. I know these 8s rigs quite well. Don't hesitate if you need any tips. Hope you had a great Thanksgiving too. 😎💪👊👊

@@richduperbash2966 thx bro appreciate reply,Have a Great Holiday 🤛🤛🤛

Thanks Brother 🤗. That's the stock ARRMA 8s EXB mount with 56 series motor slide. M2C Racing also makes a fantastic 7075 T6 motor mount. 😎💪👊👊

Hey Ryan 🤗. Those are from Discountramps.com. www.discountramps.com/skateboard-ramps/p/SK-69900-WAVE/

@@richduperbash2966 Awesome!! Thank you!! 👊🏼🍻

I might sometime, but these rigs move killer on 8s with the right electronics, tuning, and gearing. I've learned there's only so much power you can get to the ground, and wasted power usually means blown tires and drivetrain problems.

I'm using a Ridgid flip top I bought at Home Depot. It holds up to 200lb and is adjustable. Keyboard stands are another easy option.

@@richduperbash2966 Many Thanks Rich

​@@glennsimpson6749you bet Glenn 🍻

Thank you Robert 🤗. Yeah no trespassing signs are a bummer. If you see construction crews, doesn't hurt to ask the foreman if it's ok to bash away from the work zones. I've had guys give me their blessing on the spot. Just depends really. Finding open spots can be challenging. I do my share of driving around for potential areas. Google Earth maps is a great way to scout potential areas in your region. 🍻

@@richduperbash2966 I was gonna mention that I use Google Earth to browse. I live near the mountains so I gotta find some open spots. I just got a kraton exb after watching several of your vids. Thanks for sharing your builds and the incredible footage!

@@RobcadRadDad you bet Brother 🤗. Great choice with the Kraton EXB. Hope you find some nice spots to rip that sucker 🚀🚀

Yes indeed 👍. The HR caps have an O ring instead. This is a bladderless "emulsion" style setup. Eliminates the bounce back effect caused by a bladder for better dampening. 🍻

@@richduperbash2966 ohh that’s why i installed already the HR caps with the original bladders and liquid a little bit! im touching the shocks and is a little wet

Thanks Howard 🤗. Damn that takes a hard hit to bend those shafts 👀. Might send M2C a picture to see if they can help. I still prefer running stock arms with droop screws personally. Got some RPM rears months ago, but really don't like the design very much. Hopefully they do a V2 mold with a droop screw option. Actually busted a front RPM arm my second bash with them, but it was a brutal hit, flail landing onto a 3 foot drainage pipe from probably 30 feet up 😂. These trucks are massive and have to be landed somewhat cleanly. 😎💪👊👊

Great purchase Brother 👊. She's a Beast with the right set-up and mods. 🍻

Hey Brent 🤗. I'm running 60 weight shock oils and 50/200/20k front to rear diffs in my Truggified 😍. She's still my favorite no question 🥰🥰

@@richduperbash2966 right on, thanks dude I appreciate it👊🏽

@@richduperbash2966 one last question and let me preface it by saying based on your videos and advice, I put a max 8 combo plus a ton of m2c stuff while trugifing it and it is f'n awesome! That being said, What pinion are you running?

@@brentbocchetti4666 I'm running a 16T Robinson Racing Extra Hard #1216. 🍻

Definitely haven't stop running her Thomas 🤗. Just been a few weeks since I last ran her hard. 😍kzfaq.info/get/bejne/hZyChKuVt9WaiH0.html

@@richduperbash2966 good to hear😎 Nice vid, that’s what I call air control 💪🏻 Q? You use the Hobbystar 800kv right and max5? Why do some use the 1100kv and max6? I don’t get it. Thx..

It isn't easy to be totally honest. Takes lots of heat. Kevin Talbot did a similar repair some time ago on video. There's a flat plate on the esc under the cup with a small hole the cup mates into. I cut out some of the epoxy prior to soldering and used Gorilla epoxy to fill around the cup once I did the repair. In a nutshell, I tinned the bottom of the cup with solder (with cup upside down on the table). The trick is finding or fabbing a circular solder tip about the same size/diameter as the cup. I grinded down a blunt solder tip that would fill the ESC cup. I basically super heated the cup and pressed downwards until the cup sunk into position and resoldered to the ESC plate. Took me 3 tries before I felt satisfied the cup had good contact and wasn't going to come loose again.

@@richduperbash2966 thank you so much Rich!

@@bashaz8559 you bet Brother 👊

Hey Rich , have you vented belted 8s tires like the sixpacks? I've got water in mine...not sure if it's the best thing to do but pretty inevitable I guess... Thanks again !

The HR caps should spin right on 🤔. The EXB and RTR 8s use the same shock bodies and stock plastic caps. My guess is there's a slight variance in the thread tolerances. HR normally has tight quality control with their upgrades.

@Rich Duperbash ok thanx I'll just spin them on then lol and hope they work if not I'll contact them. Thanx alot Rich I appreciate it.

@@tripletrc5654 you bet Brother 👊

Thanks so much Joey 🤗. Rubber side down takes practice with air control and corrections 👍. Subtle changes with throttle and brake are key. Keeping the rigs tuned is critical for solid control. 🍻

We've had some killer lineups here in SacTown 😱. I've seen Metallica live atleast 6 times back in the day. Caught them with Guns and Roses once 🍻. Grew up in the San Jose area and got spoiled with Lollapalooza and stacked cards decades ago before the kids 😂. Last show I saw locally was Foreigner with the wifey. Had a great time at a smaller venue 😍. They were tight and on point 🍻

I like the 8s Backflips overall. They're not too heavy and handle great. For bigger power, I also like the belted Duratrax Six Pack X's and Lockups X's. They can sometimes snap the stock dogbone pins, but that hasn't been an issue with the M2C overkill shafts. 😎💪👊👊

Thanks so much man I have the x maxx also and this thing stock is just beef I can’t believe the size on some of this stuff haha that’s what she said

I've since switched to all Silicone ear plugs. It works great Brad. Just be certain to leave enough space for the planetary gear when closing up the diff. If it's not fully seated, the gears won't be properly meshed. I use Rite Aid brand premium soft. Probably closer to 1.5 plugs. 🍻

Hi rich question for kraton 6s with a max6 a rocket 1650kv good with a 15pinion the stock gear thanks

So awesome to hear Steven 😱. Stoked we have so many stout upgrade and power options now. Really hoping RPM will do a redesign with their arms. I'm fine running stockers, but have broken a few fronts from nasty hits. Hope you get your temps sorted. 😎💪👊👊

Steven I have the xlx2 and 1100kv in one of my k8s cars and have been running 39 39. Did dropping the pinion down to 34t help that much?

@@joshherrman3201 I just changed the pinion today. Waiting on some steering rack screws as I have broken one twice now. I’m hoping it will help with heat, trying to find a good fan setup too. I’ll let you know once I get a chance to run her.

@@joshherrman3201 39/39 is really tall gearing for 1100kv. I'd drop atleast 5+ teeth on the pinion. Should still have plenty of top speed with far less strain on the electronics.

@@richduperbash2966 so I have a 34t spur as well would you start with the 34t pinion or keep the 1 to 1 and do 34 34?

I definitely like the Hobbystar 980kv 56112 over the Leopard in the heavier K8s. The Leo is really better suited in the Outcast 8s. The Leo is a strong motor, but it's not very smooth for subtle corrections and the rear endbell isn't as sturdily built with the smaller screws. 😎💪👊👊

I hate to bother ya with questions you get asked im guessing on a daily basis. I appreciate ya taking the time to reply ! I've learned alot from watching your videos , especially on the 5th scale rigs . " trying" to learn what I can without bothering ya too much 😅 thanks again brother ! Your channel is 10/10 in my book 🤌

@@maxspl153 you bet Brother and I appreciate the kind words 🤗. That's the cool thing about our hobby, we're always sharing and learning. 🍻

@@richduperbash2966 well I pulled the trigger man . Videos really do NOT do this thing justice lol I can't get over how massive everything is ! They screwed up and sent me a 34t instead of a 32t for my 56112 . Think ill be ok running the 980 with the 34/39 setup ? If im mathing right it should be a final 10.4 : 1

@@maxspl153 you'll probably be ok with 34/39. If necessary, you can run 8s Backflips instead of the heavier Copperhead 2's. I'd just run it and check temps. If you break 160F or notice any cogging, drop down to 32 or run smaller wheels 🍻

Either motor is a good option. Just have to get the gearing right for good speeds and acceptable temps. I'd recommend 1/1 gearing with the 800kv. 34/34 has worked great with my Hobbystar 840kv. 1100kv works well with around 30/39 gearing. Tire choice obviously makes a difference with final gearing and performance. Use a temp gun to check temps, but anything below 150-160F is still safe. 🍻

@@richduperbash2966 thanks a lot man!!! I can’t wait to run this beast.

Probably my Truggified Typhon 6s 😍. The speed, reflexes, and durability is unmatched for all around bashing. 🍻

@@richduperbash2966 Thanks for the answer! 😀

The K8s EXB is a Beast with proper electronics 😱😎💪👊👊

@@richduperbash2966 Yeah man, it's my first Arrma, maybe I'm jumping into jt too fast

@@freddieparrydrums the 6s or 8s are both worthy 😍

@@richduperbash2966 Should I get the 6S first? Thanks :)

@@freddieparrydrums it's worth considering. I love both platforms, but the 6s is easier to tote around...etc.... and I feel like it's a must have for all around bashing, skateparks, dirt, street, wherever.

Thanks so much Brother 😜. It's fun as heck!!!! Just have to take your time and build up your control and confidence. Rubber side down is the goal. Lot easier on the wallet too. 😎💪👊👊

Thanks so much Zaraki 🤗. Deciding on electronics can be tough with so many solid options available. I'll try and add a parts list to the vid description. The biggest upgrade for the K8s EXB is an M2C chassis no question. It's a pretty tough rig out of the box. I'll link you to the M2C website. 🍻m2cracing.net/60-arrma-8s-kraton-exb

@@richduperbash2966 quite pricy shipping the upgrades to Germany I guess but most likely worth it :D Unfortunately, I could not find the Hobbystar 840kv 506112 motor on the internet... Can you help me out with a link for it as well? Really appreciating your time! ✌

@@zarakikenpachi820 here's a link to RCJuice. They carry the Hobbystar brand. Rocket motors seem very similar and may come from the same manufacturer 🤔. I honestly love the 980kv with 32/39 gearing about the same as the 840kv with 34/34 gearing. 🍻 www.rcjuice.com/hobbystar-56112-4-pole-brushless-sensorless-motor-1-5-scale.html

Hey Lucas 🤗. My 980 Hobbystar was damaged (stripped endbell and badly stretched wire harness). Figured I'd try the Leo 5898 because the 980 was on backorder at the time. The stock shock bladders become displaced even when sealed properly 😝. Eventually, M2C will likely offer an 8s cap option too. Ed with Eastern RC is such a great guy!!!! Very valuable test team member as well. 🍻😎💪👊👊

@@richduperbash2966 cool . I also meant to ask what size can you prefer in those massive rigs ? Both seemed impressive runs to me. Looked like temps were ok as well . I’m wondering how my temps will go now we’re coming into summer here. Keep on with the awesome footage . Thanks.

@@Captinfun101 I really like the 56112 size motors for raw power 💪. Only issue is clearance from the steering rack. If you have a bracing failure, the rack can hit the motor endbell with front chassis flex. Ideally, a 56-58mm diameter motor with 100-110mm total length max would be perfect. 800-1100kv is still the best range IMO.

@@richduperbash2966 yeh I had to shave my original one down from hitting before I even ran it. But I found the exb aluminium one in my kraton and a gpm one in my outcast , both are more of a straight design and clear with ease. Plus they have bearings not those sleeve things in the composite plastic stock ones.

@@Captinfun101 that's great to know Brother 👊. Appreciate the info.

Yes indeed 😍. It's simply on a different level for size, power, handling, and overall capability. I've truly come to love my upgraded XMaxx, but it's too different to compare to the K8s really. The lighter weight gives it the edge for larger scale skatepark action no question. Both are great trucks once dressed and upgraded properly. 😎💪👊👊

@@richduperbash2966 much appreciated brother. keep up the great work

The Leo is in my Outcast 8s 😍

Thanks so much David 🤗. Huge Congrats on your new K8s!!! I can't steer you away from the Castle 800 XLX2 setup. It's insanely powerful with the right gearing and wheels. That said, there's cheaper options like Hobbystar 56112 840 and 980kv that are fantastic too paired with a Max5. The XLX2 has had several reported fires 👀. That's something to think about anyways. 😎💪👊👊

@richduperbash2966 thank you. Yeah, I'm looking at the mamba monster x to. I'm gonna run proline masher x belted tires.

@@davidchennellsjr.6799 they're great mixed use tires. The belted HP's are much lighter than previous. I'm about to try the MX57's. They have much more aggressive tread and also weigh about 680g per wheel. Same size and rim as the HP Masher X's.