what kind of video ends before the job is complete???????

For the seat heater connector pins. This is the only hard part. 1-disconnect the harness. 2- disconnect the plastic housing from the bracket (pulling towards the pedal). 3- The Black and the White connectors are coupled together. They both have to be removed simultaneously. 4- Push the 4 sloped pins, top and bottom at the same time to disconnect (that is the aweful part).

Thanks for the video and the new seat cover. Was a bit harder than I expected but those things are always tough the first time you do it. Turned out really well!

Perfect description. Thanks so much.

Excellent explanation

Just found your channel , thinking about doin front seats on my 2011 c class facelift. But i have air cushion adjustable seats. What do you know about that , is it also possible.

Will order your product

If you swap out the bottom from a heated to nonheated and keep it unplugged, will it do anything more than throw a code?

Man this is a nightmare to replace!!

I can’t for the life of me release the pins to release the seat from the car! Please help

The most challenging part of removing the seat is removing the seat heater connector. It would be nice if you showed that portion. Or, at least showed pictures of the procedure. Others have mentioned disconnecting the harness as the first step. Others have said both connectors (White and Black) need to be removed simultaneously. You show a disconnected harness, but nothing shows how to disconnect it. Does anyone have any tips? Also, how the heck do you push 4 pins at the same time to remove the two connectors? I'm assuming there are 4 because both connectors have a visible pin, and there are probably 2 on the other side. I'm considering cutting and splicing. Someone in another video did that because it was easier. It's only 2 wires.

The driver's seat always suffers more wear and tear. Can you swap the driver and passenger seat bottoms with each other?

I appreciate the effort to make a video, but your hands cover up the most important parts. Would be nice if your company would invest in a cameraman to point the camera at the actual work.

Does your tan seat cover match the factory color of the glk?

Nevermind , just found video on that . Same procedure

Would this be the same for a Glk?

This must be an aftermarket seat pad? I just purchased from the dealership(11/23/22) "bottom pad," and it comes with the heating element, meaning it's all complete. Just pull the old one off and slip on a new one from the dealer for $350. I can't get that wire to unplug h3 shows in the pic 😫

Is the c class heated bottom seat direct fit on the glk ? PLEASE HELP!!!!!!!!!!!! 🙏

Can’t see it bro

Cutting the pad along the attachment points kills the seat heater. It has fibers sewn throughout the grey padding.

Other than the atrocius audio, most of the work not being in the camera's view and no upclose view of the releasing of the clips ( a pretty important piece of the puzzle), it was an otherwise incredible video-NOT!