How to install a custom gear indicator on a Yamaha R1 2004-2006
Пікірлер: 126
@Rudy-en3sh4 жыл бұрын
Yo red fire...your video helped me to completely installed my healtech gear indicator on my 2008 R1. I love the video bro, keep up the good work...I followed your instruction and was able to take my bike apart safely and put it back together without a problem...I program and reset the gear indicator just as you explained and it’s working perfectly fine 😊👌🏽
@rickybritish4 жыл бұрын
Rudy Brown-Vidal I am so glad I could help someone else,thanks bro
@rickybritish4 жыл бұрын
Rudy 7 need some subscribers I would be more than great full if you could
@haqi9fly3 жыл бұрын
@@rickybritish I fixed it bro, thanks man. Good video.
@rickybritish3 жыл бұрын
@@haqi9fly what was it causing the problem
@rickybritish3 жыл бұрын
@@haqi9fly bro your welcome where the man writing from
@samuellevy68863 жыл бұрын
Just installed mine thanks to you. Great video mate 👍👍
@rickybritish3 жыл бұрын
Your welcome
@kyriakospantazis40172 жыл бұрын
Thank you,it was very useful.greatings from Greece!
@yamahateam5d2 жыл бұрын
Thank u mi genna, I just bought this and your video is gonna help me a great deal! Respect boss
@rickybritish2 жыл бұрын
Me Breda any help you need just give me a shout seen
@KingMarioENT3 жыл бұрын
My g respect! You make that real simple for me!💯 nice bike too btw
@jasonpaper99924 жыл бұрын
Your a legend brother 💯🙏
@IN2RIDE Жыл бұрын
You saved me lot of time, cheers 🤜🤛
@rickybritish Жыл бұрын
Yours welcome bro
@youtubetrucker82033 жыл бұрын
I checked out the alarm and I'm comparing it with the amazon offerings. By the way, I installed my Idea gearshift indi two days ago with your help. Thank you very much. And by the way, don't worry about the haters on here. Your vids always help. At least count yourself lucky you are not in the states with all the antif riots and looting.
@rickybritish3 жыл бұрын
Bro I think about that always and say I am happy I am not there but feel it for the ppl
@alexxrosso38334 жыл бұрын
Vielen Dank für die ausführliche Video-Anleitung. Hat super funktioniert und mir enorm geholfen.
@rickybritish4 жыл бұрын
Alexx Rosso I am glad it did. I am trying to get 1k subscribers
@damioncunningham45023 жыл бұрын
This video been done awhile back ,and I like it very helpful best out of the most I've watch.i have a 2006 r6 I think it's the same concept .thank bredda"yo sound like a 🇯🇲
@rickybritish3 жыл бұрын
Moores Clarendon to be exact yes Jamaican 🇯🇲
@rickybritish3 жыл бұрын
Moores Clarendon to be exact yes Jamaican 🇯🇲
@damioncunningham45023 жыл бұрын
@@rickybritish bless up mi boss.good video I'll order my gear indicator soon.if I have issue for what ever reason can I link yo?
@damioncunningham45023 жыл бұрын
@@rickybritish one think I dont get fully....which wire yo seh the green wire goes to on the crack sensor the whiteish looking wire or the darker looking wire??
@rickybritish3 жыл бұрын
@@damioncunningham4502 the whiteish wire
@LCodGamingX4 жыл бұрын
damn good video bro
@rickybritish4 жыл бұрын
LCodGaming X I would be more than happy if you could subscribe
@xVicylx4 жыл бұрын
Very Helpfull thank you so much for saving me the Time to search the Cables and Connectors, you should sell this Video to the Manufacturer of the Gear Indicator
@rickybritish4 жыл бұрын
xVicylx need some subscribers I would be more than great full if you could
@haqi9fly3 жыл бұрын
@@rickybritish hey bro do you connect the green wire to the white wire or the gray one? Because it looks like you point to the white.
@rickybritish3 жыл бұрын
@@haqi9fly the white or the lighter color one.
@sasasternja5 жыл бұрын
Nice bro, i will do the same by your receipe 😊
@rickybritish4 жыл бұрын
Sasa Majstor need some subscribers I would be more than great full if you could
@floydwilcox54304 жыл бұрын
Great video, thank you. Speed Safe 👊
@rickybritish4 жыл бұрын
I would be greatful if you coild subscribe
@madabouthistory4611 Жыл бұрын
very well explained thanks for your time
@rickybritish Жыл бұрын
Your welcome
@davidgroves57185 жыл бұрын
Good video 👍
@rickybritish4 жыл бұрын
David Groves need some subscribers I would be more than great full if you could
@Ayitsloso3 жыл бұрын
GOOD VIDEO MAN >>> I DO WISH YOU SHOWED US HOW YOU PROGRAMMED IT WITH THE SHIFTING THROUGH GEARS
@rickybritish3 жыл бұрын
I installed the gear indicator on a Honda it’s the same way they are programmed kzfaq.info/get/bejne/jcBpfamErdnZgZc.html
@Ayitsloso3 жыл бұрын
@@rickybritish thanks
@Rudy-en3sh4 жыл бұрын
I also understand that you installed an alarm and a GPS tracking device system...any word on which system is best for my bike...and do you have a video on installation of the alarm system and GPS tracking device?
@rickybritish4 жыл бұрын
Rudy Brown-Vidal I am using this alarm system m.aliexpress.com/item/32850540493.html And this tracking device kzfaq.info/get/bejne/e6yolqygmafcpok.html .i had a video somewhere but the installation is not so hard I didn’t connect the cut off or the remote start because in Germany the bike have mobiliser and I can’t bypass it.
@youtubetrucker82033 жыл бұрын
RBG, what type of alarm do you have installed? I'm looking for a system that connects to the battery and is real loud. Thanks.
@rickybritish3 жыл бұрын
I used this one and it’s loud € 51,89 27% Off | Original OEM SPY 5000m Two Way Anti-theft Motorcycle Security Alarm System With 2 LCD Transmitters Remote Engine Start a.aliexpress.com/_BOQL6g
@ignaskuvakinas90394 жыл бұрын
Hi I can't see where you connect green wire in camshaft sensor? White or grey wire can you say? I connect to white wire it is a big problem? Everything works fine
@rickybritish4 жыл бұрын
Ignas Kuvakinas white
@ignaskuvakinas90394 жыл бұрын
@@rickybritish Thank bro 👌
@rickybritish4 жыл бұрын
Ignas Kuvakinas more than happy if you could subscribe
@haqi9fly3 жыл бұрын
So do you connect the green wire to the gray or white wire? Because you sad gray wire but it looks like you connected the green to the white wire.
@rickybritish3 жыл бұрын
White or lighter colored wire
@jeovajunior3549 Жыл бұрын
I did everything like u said , but when I turn the bike one it just stay on L dosent change for 1 gear , i conect the on the white wire I should conect to the gray?
@rickybritish Жыл бұрын
L is not bad it mean learn,so you need to find a fraught road and learn the gears
@rickybritish Жыл бұрын
Did you get it sorted ??
@mrchocomel3 жыл бұрын
Hello, the red wire of the indicator went on to the brown wire?
@rickybritish3 жыл бұрын
The red wire is positive you can also connect it to any power wire the battery any key on wire to the brake wire if you connect it to the battery it will stay on when the bike is off,I did one for a friend and I connected it to the brake wire so when you turn the key (key on) the brake light come on and the indicator get power.
@nazifazam11382 жыл бұрын
Hi, I have 05 r1, I followed the way you connected the wires but when I connect the red wire to the brown wire using the connector and turn on ignition. The gear indicator doesn't come on. Any tips on what I'm doing wrong?
@rickybritish2 жыл бұрын
The red wire is power wire you can connect it to any power source,I did my friend bike I connected it to the brake key on switch.
@rickybritish2 жыл бұрын
Hi Nazif did you get the indicator to work ??
@ayyblyat94503 жыл бұрын
So I plugged in the big white connectors to each other, made the green wire go into the white wire, then made the red wire go into the brown wire. I turned on the ignition and the L flashed, then when I started it, it flashed faster and a blinking 1 was shown. Whenever I was going in 1st ear though, it would not save it or show a 2. It would just keep flashing the 1. Any idea on what to do?
@rickybritish3 жыл бұрын
You need to get a straight road with not too much traffic,put it in 1 gear ride it with over 3000rpm,when the one gear is save you will see a N then change to 2 gear after seen the n go up the gears and that should help.
@rickybritish3 жыл бұрын
kzfaq.info/get/bejne/bqmlm5WlzKevj4U.html check out this video and let me know if you fix it.
@ayyblyat94503 жыл бұрын
@@rickybritish I rode in 1st gear at 4000k rpm for 30 seconds but it didn't show the n or 2 gear
@rickybritish3 жыл бұрын
The red wire is power 12v key on and the green should be connected to the camshaft wire one of the 2 wires coming from the camshaft sensor.
@rickybritish3 жыл бұрын
Which country do you live in ??
@rickybritish4 жыл бұрын
I can see where 3 ppl don’t like my video,I does don’t see what’s there not to like this video help so much ppl to get there bike 🏍 indicators up and wrong did I say some wrong?
@JDeezle214 жыл бұрын
Rickybritish German because people can’t help themselves. I think people look on KZfaq to find videos with no dislikes just to dislike them.
@patrickkvalvag67844 жыл бұрын
Great video! Dont care about jealous people😃👍
@haqi9fly3 жыл бұрын
I need your help do you connect the green wire to the female or male part of the camshaft. I have it connected to the male and for some reason it’s not giving me the signal to start in first gear. Please help! Just say male or female.
@rickybritish3 жыл бұрын
@@haqi9fly green wire to the crankshaft signal and the red wire need to be connected to a power so when you turn the bike key then you have current
@haqi9fly3 жыл бұрын
@@rickybritish ok. I got that part right, and everything comes on but it never gives the signal to go in gear 1. Do you think it’s because I connected the green wire to the male part? I. Connected the wire to the white wire but on the male part.
@terrymicalizzi3 жыл бұрын
Hi great video. I just put one on my 06 green wire goes to light grey wire is that correct thanks
@rickybritish3 жыл бұрын
Yes light
@rickybritish3 жыл бұрын
Terry did you get it to work???
@terrymicalizzi3 жыл бұрын
@@rickybritish thanks bro working now cheers
@terrymicalizzi3 жыл бұрын
@@rickybritish yes thanks its working now
@marcobarba41623 жыл бұрын
Hi i didn’t understood were do you connect the red wire?
@rickybritish3 жыл бұрын
You need to find a power source so I find next to where I connect the green wire a connector with 2 wire connect the red wire it could be any power so when you turn the key it get power and turn on
@marcobarba41623 жыл бұрын
Ok done, thanks 🤙
@bayouraider84234 жыл бұрын
I need a video for a Gen 1 Hyabusa. Can you help?
@rickybritish4 жыл бұрын
Bayou Raider sorry mate I am really not sure I found this video maybe it can help kzfaq.info/get/bejne/m9FnrJiluLaXYY0.html
@rickybritish4 жыл бұрын
need some subscribers I would be more than great full if you could
@stephenstrassen11354 жыл бұрын
id like to see it working buddy
@rickybritish4 жыл бұрын
stephen strassen kzfaq.info/get/bejne/bqmlm5WlzKevj4U.html
@tonythetorment5 жыл бұрын
Thx for the vid ... Ive done it excactly the same... Only thing is... It wont go past learning the 2nd gear... Tried to reset it i dont know how many times.. But it Just wont work..
@rickybritish5 жыл бұрын
Reset the gear indicator turn the key on and off about 7 times then take it on a straight road and go up the gears.
@rickybritish5 жыл бұрын
I had the same problem to start with,just reset and try again it should count down from 6 to 1 when you reset and you should see a L then try to get the rave over 3000 and go up the gears
@rickybritish5 жыл бұрын
Tony van den Oever hi did you get your gear indicator working ???
@rickybritish4 жыл бұрын
Tony van den Oever did you get it to work if not I will make a video for on Saturday and show you how to reset and reprogram it back ok let me know
@rickybritish4 жыл бұрын
Tony van den Oever kzfaq.info/get/bejne/bqmlm5WlzKevj4U.html
@GoldMineTurtle5 жыл бұрын
is this the same thing as an r6 2008?
@rickybritish5 жыл бұрын
GoldMineTurtle I am not sure
@rickybritish4 жыл бұрын
GoldMineTurtle need some subscribers I would be more than great full if you could
@jaymitdeturbo47564 жыл бұрын
Moin Ricky! Bin auf das video gestoßen da ich gerade an meiner MT01 etwas rumschraube! das scheint so als ob das genau dasselbe ist mit den kabeln und steckern! danke !!! greetz
@rickybritish4 жыл бұрын
Jay mitdeTurbo super Dankeschön jay
@rickybritish4 жыл бұрын
Jay mitdeTurbo Wo lebst du?
@jaymitdeturbo47564 жыл бұрын
Danke! Hat funktioniert! Hab von der Fußbremse das Stromführende Kabel genommen (waren leider beide schwarze) und das andere an den Stecker vom Camshaft ... musste ich rausoperieren- war aber ähnlich wie bei deiner R1 ! Endlich, war echt doof ohne Ganganzeige! 😋👍🏼
@jaymitdeturbo47564 жыл бұрын
bei Kiel (Nord Ostseekanal)
@rickybritish4 жыл бұрын
Jay mitdeTurbo ok
@RICOakaDUDE5 жыл бұрын
Mi need fi ask yo ah question blood,yo have ah direct contact?