Barry you`re like Bob Ross of simracing, your voice is relaxing and your videos are amazing to watch, I`ve never got bored watching them

Just did this mod. Worth every dollar. Also appreciated the idea to swap the springs around.

I'm so glad i found this channel. I watched your G29 and T300 reviews as well.

Great video,love how detailed you are. The disassembly parts might be my favourite parts of all your videos. I love seeing how things work. I’m a sim racing newbie but I have learned a lot from your videos. Thanks!!

Thanks for the extensive tutorial. Got me really interested in that mod.

Thank you Barry. I am planning on a major rig upgrade toward the end of the year, so you sold me on the idea of using this tweak as an interim step for a few months. I placed my order today,

Thanks Barry, was literally pricing this last night after struggling at Richmond.

Another thoroughly informative and entertaining video. Thanks Barry.

Hi thank you very much for pointing this out, just ordered it and it feels great far way better than before. Great analyze video and great kit. Keep on going with greetings from Switzerland ;-))

I love to buy one pre-installed. Didn't even have any luck on ebay. I found one preinstalled but it was an older model.

Great Barry, I this is what I was looking for to upgrade my rig.👍and who doesn't like your video?!? You make the best entertainment for simracing on KZfaq, can't find any better. Big up👍😁

I got the Truebreak mod for G923 and its amazing. Basically gives you the same precision and feeling as a load cell at fraction the cost.

Love your reviews, you deserve more subscribers.

works well i also did the spring swap & swapped the rubber bushing for thrustmaster t3pa-pro upgrade red bushing from Ricmotech. I have a LC on G29 & Thrustmaster. The G29 is very good times consistency improved on both. The G29 with LC is a winner & would take a direct drive wheel LC setup as your next step. GT Sport PS4

I have now a high end pro pedals but I had for many years the G27 pedals and they still a great kit and very moddable. Firstly I used the Perfect pedals mod thin the TSS Brake Mod....

I don't have a racing wheel and don't even play video games but this guy's voice and video is so smooth I spent 40 minutes watching it. Haha

I installed this a couple of years ago on G29 pedals, but just recently started having issues with Gran Turismo Sport on the PS4 after a game update. The brake was getting activated without any pedal actuation, which caused all kinds of problems with various cars. After speaking with a Ricmotech rep, he instructed me to go in and cut off approximately one "loop", or 360 degrees of spring to lighten the tension slightly. I wound up cutting off only about 270 degrees worth from the end of the spring, and it seems to work fine again. Thanks for all the helpful videos!

I cut the rubber piece in half for my brake pedal. Works very well for me. I swapped the throttle pedal with the clutch pedal for a stiffer throttle. Most cars don't use a clutch anyway. Works very well.

Genius! ordering now

this guy is a legend

Good stuff. Thanks.

So far every time I think to myself I should find a review about X you already have a video on it. Really enjoyed the content. Do you ever sell stuff after you review it?

Highly recommended is V3 of Ricmotech's LC27 load Cell conversion kit also compatible with the G923 have it 100% recommended for Logitech G Series owners

Another mod you can do is make a hole on the side of the pedal casing for the power cable to come out of, instead of coming out the back so the cable wont bend when you put the pedals against a wall. thats what i did to mine when i was using them. not everyone as a sim rig.

Man you are Awesome!

What is this sorcery?? This is the exact mod I was thinking to do next to my rig. Thank you for the upload!

Great video Berry, I've been considering this Ricmotech mod for my TM T3PA-Pro pedals. I think it would be a great investment. I race on Xbox in FORZA & plan to get into PC2 some time. I love DiRT RALLY but it doesn't recognize my TH8 H pattern shifter. Only wants a sequencial shift pattern 😥 Thanks for doing all this hard work for us Sim racing fans 👍👍

Hi Barry, great review. There's a lot of questions about the travel of the brake after this mod. Do you recommend this for Oval racing? Can I do something about the stiffness like use a softer rubber, or maybe drill a few holes in it?

I cut the load cell simulator in half on my pedal. It works good enough for me. More travel, better feel.

First I must say my name is Joseph. I’m using my girlfriends youtube because my phone was lost. I gotta say, I love your videos Barry. I love how in depth they are and I know whole heartedly that anything I purchase with regards to racing sim, that you’ll have a how to video that is quite informative. I just wanted to ask you a question about my particular situation. I just started to get into sim racing as seriously as I can afford lol. I own a PS4 Pro. And I bought Gran Turismo Sport and my favorite Assetto Corsa Competizione. I think that’s how it’s spelled. Not near my system at the moment. I recently purchased a GTomega apex wheel stand and also a Logitech G29 wheel set. I also got a GTEYE 3 spring set that I recently installed. And a magnetic paddle shifter assister from eBay. I love the new springs and the magnets. I’m definitely on a limited budget for the foreseeable future so I wanted to know your thoughts on purchasing the GTomega seat adapter and the Rs9 seat to go along with it. I’m a long way from being able to afford motion platforms etc, but I want to really get into racing simulation. I’ve taken Motorcycle racing corses in Oakland Ca. And did some NASCAR courses in Orlando Fl. And I’m dying to try the Skip Barber racing school in some regard. My budget for my upgrades at this moment are $500. And the GTomega seat and stand fit perfectly in that. Any thoughts?

Great review, Barry. Did you get a chance to try this mod out with your heel and toe technique? I'm interested to know if its stiffness and reduced travel had any impact in terms of your ability to execute smooth shifts as normal.

Good video and info, Cheers !! I have a quick question though.....If I do this upgrade to my G920, will it work on my Xbox One X with the Forza games, F1 games etc. etc. ??

For those of you wondering there is also a Ricmotech load cell mod for Thrustmaster's pedal kits, whether you have the 2-pedal or 3-pedal setups. I have to imagine this review should mostly apply, minus the gross Logitech firmware issue. I've actually got that kit coming in the mail today for my T3PA-Pro pedals and I'm really excited for it! I would still love to see a review of that mod from SRG.

Have you tried out the Ricmotech Load Cell Mod for the T3PA-PRO pedals?

Ricmotech says to remove the plastic caps, on the inside of both caps, if installing on G29 or G920 pedal set. Did you only remove the bottom one and leave the top in? Looks like it in the video. Great video!!

Hey, Barry, you seem to be the expert on all thing sim racing....Got a question, Can I use my old CSR elite pedals with the Logitech G29 wheel?

I would love to see a review of the TrueBrake mod for the G29 pedals as well. I think it's a bit cheaper. It replaces the piston with some kind of dual spring system that is supposed to mimmic a load cell.

I just ordered the parts together with a Leo Bodnar D-sub to usb conversion cable. Did you connect the paddles back to the steering wheel or through a conversion-cable?

Barry, in pc2 i think that you can get rid of that bothering blurry effect of the helmet cam on the camera options(at least on pc). I love helmet cam motion but i eliminate the blurry effect and the helmet overlay to be able to watch the car's dash

I wonder why nobody's using automotive electronic pedals for their DIY sim rigs, a lot of modern cars use electronic gas pedals, for example, and those can be bought new for under $30 made by Bosch

Nice review Barry, I have had this mod for some time and it works just like I hoped. Small pointer, I doubt that you would notice any difference in iracing with diview adjustments since the calibration in iracing reads straight from the raw data and doesnt read the direct input from direct x. All the other titles you drove does though :)

Good review, very informative, thank you. But for me the price would be a no-go, as well as invalidating the warranty.

Looks like it will be very hard to remove the load cell back from the plastic housing, isn't it? Great review btw Barry, congrats!

25:42 lol Barry you laugh of your own commentary. Make sure it's in the right hole.

LOGICHECK - YEP

Awesome video! But how is your G29 so quiet, even in PC2. I've turned a lot of my settings down and it still rattles.

Is this mod any use if using a g920 with xbox one? Or is it only for pc racing?

You could upgrade the feel of 1 pedal for $130 or just buy a better set of pedals for not much more. This upgrade should be like $50 max!

Only person on youtube that can turn what should be a ten minute review into a 40 minute review.

i just got the Leo Bodnar's Logitech USB Conversion Cable, should i do this upgrade next?

DO you know if it is possible to get a potentionmeter wiht at longer travel. So it become possible to use the entire travel, when you take out the rubber piecefor the G29/g920, ore at least most of it.(A challenge mabe) if you used a 20k/OHM insted ore somthing ? Thanks for the great videos

? would this div program work with out the load cell as i am now use to this peddle as such just thinking maybe getting that deadzone out would be better feel in its self

I feel a bit of vaste of money, Fanatec csl pedals are 230 euros with 12-16 bit resolution loadcell! That mutch better worth of me.

I think I may have broke mine as I removed the rubber block making really hard to use the peddle but when I put it back together the wheel doesn’t work anymore don’t know what I’ve done but not happy

Band-aid needed on the thumb after drilling? =)

The g29 brake pedals are pretty decent but can be better. The one I want is throttle pedal stiffer. If i use my racing shoes they are just too heavy

Could you just get rid of the rubber block and set up the deadzone in DiView to get rid of that agressive curve and have it more linear? Did anyone test this?

I've just ordered one of these (V2) for my PS5 and G29 setup. At 29:30 you show a PC control screen. I am thinking that any adjustments are impossible for Playstation consoles. Please tell me I'm wrong. Have I just wasted money? EDIT: I went to 37.00, you explained it well. Great video by the way!

i’d prefer to buy clubsport v2 or csl elite

Hello which steering do you think should I buy? Thrustmaster T150 Pro and Logitech G29

Great info. Could you tell me what angles your side screens are at? I just set up triple screens and was wondering what is the best angle to use.

I've been saying Rimotech for like 2 years

Is it possible to configure the kg of force required or is the quantity fixed? Congratulations on your review

idk if they have changed this since the video but i have the G920 pedals and the brake is so hard to press i need a brake reducer lol i about flip the pedals trying to press the brakes

go with the 40%

What chip are they using for load cell amplifier?

I got G29 for several years but havn't have had time to evaluate a gearbox stick yet, have any body seen or heard about any one building one themself cause G29 and orobebly G920 has a 9pin Dsub connection for gearstick and if 2 are used for ground and +5V theres 7 signal pins free for real simple signals.

Welcome to Bob Ross, the joy of sim racing!

this seems way too much work, so i used alternatives by upgrading the springs to better springs with rubber sealers and works better!! will the load cells work on the gas pedal and the clutch pedal!?

Hey, Barry. Would you be able to compare this mod to the combination of the GTEYE + 3DRap mods? I've heard of a few people who use this combination and claim its the greatest thing ever. Thanks!

Should I do this if the current brake pedal makes my chair move?

Does DIView alter the actual firmware of the pedals / base? Or does it only keep those settings for the G920 Logitech software on the PC? What I’m asking is: if I do this calibration, will the settings be kept for the Xbox? Or is it only PC? Thanks for a great video. I always look forward to your in depth analysis.

Could u play a truck sim without problems or should u only play racing games with this brake

What is the best mod to do to the logitech G920 brakes

Do you have any comments on the stiffness of the brake pedal? I've heard some reviewers say that its unusually stiff, but you mentioned it has a much more natural feel. What's your opinion on those who say the pedal is way too stiff?

do they sell these cheaper on black friday?

so when you were in 3-screen mode (non-console), what video card in your Gaming PC allows you to crank 3 screens? i assume those are 4K or 2K, but perhaps not, maybe they are just good ole 1920X1080 on a 1080Ti video card (nVidia)? Thanks for any help with this!!!

I would like a more advanced set of pedals that I don't have to worry about doing this mod, can you give me a recommendation? Money is no object and thanks kindly.

Great product while it works, about a year for me. Now I'm stuck with a dead pedal set.

Your build blower from "amstudio" channel?

Jesus christ. I was looking for ways to make my g29 setup better so I didn't have to buy Fanatec, but at this price, I might as well go ahead with Fanatec. The LC upgrades cost the same except Fanatec is like 20 times better when it comes to quality and ecosystem.

25:48 rules to live by 😂

Sorry to dig up such an old video for a question. I am considering doing this mod on my g27 brake pedal. Can you speak to the durability and reliability of this mod? I noticed that on the customer reviews on the Ricomtech site there were alleged instances of failure after only a month or two of usage and comments that Ricomtech support was lacking. This makes me hesitate to spend $130 on the load cell mod. Your input would be appreciated.

Well, i found a complete new g27 for less the price of the mod, and it's doing good

what software did you use to test the mod?

What mod would you (and the other guys in the comments) recommend? This one or truebrake V2?

It looks very stiff with the mod. Will it be less stiff compared to the stock pedal? I don’t like the stock feeling.

hi, sorry im late to the party but i have a question. I have a Logitech G920 and i play ACC on Xbox One. if i make this conversion, how do you calibrate your pedal in game? it seems there is no setting for it. Thanks

Quick question, i bought a cheap thurstmaster force feed back wheel and it felt notchy in the steerig. does the g29 feel notchy as well? or should i get a belt drive?

Would this still work if the pedals were positioned inverted?

$129.95 Wow. That's quite a bit.

The travel distance was the same as the stock?

I stripped all screws on my g27, what can I do?

$130 mod for $250 wheel set is crazy price. No thanks

Will Zandvoort come back to F1?

Its a pretty pointless upgrade now. Rimotech mod is approx 190 CAD incl cheapest shipping. There is also duties as well but I'm not sure how much. You can buy the thrustmaster t-lcm for 300 CAD and get a much better built brake set without any modding work. The fanatec CSL LC are around 300 CAD too

Damn, was about to buy this but $129.95 ?!?!?!

I'm curious why anyone would want to go through all this trouble when the load cell kit is $130 and the needed Leo Bodnar USB Cable is $40 and a brand new Thrustmaster T-LCM (load cell pedals) is $199..

Why do you sound like Bob Ross omfg

Without knowing the exact inner diameter of the pedal tube, there is a loadcell, which more than likely the one what is featured in the video. hu.mouser.com/ProductDetail/Measurement-Specialties/FC2211-0000-0100-L?qs=sGAEpiMZZMvDU9HV27FC0bfgshpg3%252bR8evdx8Gaw3Yc= and with a Leo Bodnar loadcell amplifier, the whole project is cost around $70. If you want to go real DIY.