Hi Allan, post more videos of that machine bro. Thanks.
@theresaljones783910 ай бұрын
Watching from San Antonio Tx
@adubbproductions10 ай бұрын
In the building. Thank you so much.
@T_Nice10 ай бұрын
That is cool! It was as if you were a kid in a toy store with all of the cool toys! I like that and I don't have 1 yet!!👍🏽
@adubbproductions7 ай бұрын
It’s always fun to play with new gear.
@aventurerodearroyuelos134510 ай бұрын
I’m not gonna lie, it’s badass. Even though, I’ll compare this like a Tesla vs sierra Denali; yes, the Tesla (10s panel) got more technology functions and a modern look, but there things like physical buttons from the Denali (8s panel) that for me personally are more practical. Probably I’m just trying to justify the fact I just financed my machine without even knowing the models will renovate this same year, or what do y’all think?
@adubbproductions10 ай бұрын
I think that the 10S panel is not gonna cause you business to make more money than the 8S panel so it really doesn’t matter. Cool to have but same design being embroidered. You are in the game. $$$$
@validationkids5 ай бұрын
Sending image from chroma to the Marquee 10s👀
@eaoshin162810 ай бұрын
Dang it i just bought mine today too MT2002-8 Two heads. will be delivered next week. Paid some first payments to bring my monthly payments down well ill take it like that.
@adubbproductions10 ай бұрын
Question? Did you use my affiliate link?
@eaoshin162810 ай бұрын
No I did know you have one i contact their office and we went through it together with their accountant dept head Stephanie and I paid to their accountant because I really don't want to be paying more than $200 so deposited some certain amounts to start with.
@eaoshin162810 ай бұрын
They ask me how did I hear about them I told them it was through your KZfaq channel
@aventurerodearroyuelos134510 ай бұрын
At lest we have wifi data transfer🥲
@Lys_svr2 ай бұрын
Hi, nice video, Please approximately what is the price of the machine with the new panel? thank you
@MZ1TXILI7 ай бұрын
It's about time... Ricoma is way behind its competitors...I see essential things that should have been in Ricoma a long time ago.... not being able to update from a 7-8s is a ................
@adubbproductions7 ай бұрын
All that does really matter though. They still all embroider the same designs. All the bells and whistles isn’t gonna make you more money. Many shops still use ancient equipment. Most of the stuff we get from over seas are made using machine almost as old as dinosaurs. (Not literally but most of them don’t even have screens.) I faceTime with these people often on Instagram. All those factories have old machines. Still create amazing products. Can't charge more for a design just because the machine has the latest tech.
@MZ1TXILI7 ай бұрын
@@adubbproductions with a Janome 11000 since 2010.... I bought my RCM 1201 TC 7S in 2023,, 13 years more modern and my ricoma did not do things that can help you day to day... and what ricoma presents as new in 2024,, , add a small ornament with the design on the screen... have some -abc- that are better usable on the screen,,, and what I miss most, being able to give small positive or negative degrees, quickly, to finish leaving the design perfect once prepared in the Hoop... my Ricoma machine is perfect... but I see that it has taken a long time to update compared to the competition... as you say, older machines can do it even better... but once you have some options if your new machine does not have them, you will be disappointed
@RubiRojas-mj6jx8 ай бұрын
Hello! I got my swd 10s a month ago. I recently started looking at the mighty hoops and currently have one of the smaller sizes. I'm wanting to buy bigger ones but not sure what style is supposed to be as they have many options for the brackets, do you have any recommendations? Also, would you make a video in the future explaining how to use mighty hoops to be able to embroider and how to add it to the panel? TIA!
@leviteapparel10 ай бұрын
Omg amazing 👏🏿 🎉🎉🎉
@adubbproductions10 ай бұрын
Right
@daviddrumcovers14986 ай бұрын
Hey men we recently received our EM1010 with the option of this screen 10s and it is great is just that we are stuck on some stuff like the machine is stuck on (Main shaft is not set to 100deg which it is and is not letting me move out of that also can’t find where to adjust the perimeter to be able to embroider lower on hats and visors a video of this issues would be really appreciate thanks men
@robbiedhabiАй бұрын
@@daviddrumcovers1498 have you managed to find out how to do this David? I have been trying to figure it out as I just got one.
@daviddrumcovers1498Ай бұрын
@@robbiedhabi No I haven’t had a chance to mess with it again
@southernbellblessed24029 ай бұрын
Do you believe getting the new machine with the 10s panel is worth the cost difference? Example: MT-2001 vs Marquee 2001
@impressiveprints531210 ай бұрын
My TC1501 just got dropped off last week now I see this 😫😫😫😫
@LucyLu7010 ай бұрын
I feel your pain
@adubbproductions10 ай бұрын
Yea. Unfortunately it was just released at Deco Summit. Don’t worry though the panel wouldn’t have made you any more money. Same design gets embroidered. Very nice to have the features though no doubt.
@impressiveprints531210 ай бұрын
@@adubbproductions yeah the damage is done time to get to learning I’m in the thick of it now,keep up the good work bro I’ve been watching your vids for years I’ve learned a lot of things I appreciate you 🙏🏽🙏🏽🙏🏽
@karen4ujamaa597 ай бұрын
Exa
@karen4ujamaa597 ай бұрын
@@LucyLu70 I just got mine too. I heard about the New screen being showed at the Deco Summitt and I thought I was getting that since they started showing it a few months ago. I haven't even been able to use my machine yet because I'm waiting for my training. They definitely should have told me they were selling me a out dated machine. I don't know about you but I feel deceived.
@LucyLu7010 ай бұрын
Congratulations on your new investment God Bless
@adubbproductions10 ай бұрын
Thank you, however this is a loaner. Gotta give it back. Might just buy it though. I haven’t decided yet.
@LucyLu7010 ай бұрын
I say go for it however you need a bigger space you have came a long way God has blessed you and you have blessed us with knowledge and teaching us a lot So Thank you I appreciate you.
@boyboi469210 ай бұрын
How much is it to upgrade from my old screen
@adubbproductions10 ай бұрын
About 16k maybe. You gotta buy the entire machine. Can’t change screens
@aventurerodearroyuelos134510 ай бұрын
Dang I just bought mine 😢
@adubbproductions10 ай бұрын
Which one?
@adubbproductions10 ай бұрын
Did you use my affiliate link?
@aventurerodearroyuelos134510 ай бұрын
@@adubbproductionssadly no, I actually ordered the swd 8s a like 3 months ago
@jovannacantu550810 ай бұрын
Question??? Does it keep the threads per design in the memory??? Or is that still the same… every time I do the same design I have to input the threads!!!
@adubbproductions10 ай бұрын
Yes. Once you assign the colors it stays in memory. All of them do that, even the oldest panel. What machine are you talking about? I have three generations of panels and they all save the colors once I assign them. ? Still the same? What machine?
@dimitrio.73109 ай бұрын
@@adubbproductions is the screen available for the 6 head?
@hooked_fish7 ай бұрын
The new touch screen can be adapted to my mt-1501?
@adubbproductions7 ай бұрын
No unfortunately not.
@hooked_fish7 ай бұрын
@@adubbproductions thanks you bro , no good for me 😕
@adubbproductions7 ай бұрын
@@hooked_fish a panel is not gonna increase the revenue. You are good either way. With or without that new panel.
@hooked_fish7 ай бұрын
@@adubbproductions yea Exactly that is the correct answer
@theresaljones783910 ай бұрын
AAAAA-DUBB ❣
@adubbproductions10 ай бұрын
You are amazing.
@theresaljones783910 ай бұрын
@@adubbproductions is this really Allan or someone posing as Allen? I'm sure you won't say if it is. You asked for my email a while back, if it's really you, send me another one and just say "Hi"❣
@adubbproductions10 ай бұрын
@@theresaljones7839 Hi. Yes it’s me. Lol
@02downhome10 ай бұрын
'No emergency stop button? That makes me nervous!!
@adubbproductions10 ай бұрын
It has one I think. Just not in the touch screen. Not in the studio right now. I will look tomorrow.