RIDE GUIDE ---3 VITAL VSETT 8,+9,10+,11+ P SETTINGS---HOW TO CHANGE YOUR P SETTINGS

Рет қаралды 30,614

Escooter Modification & Guides (EMG)

Күн бұрын

Another quick video on 3 of the most important Vsett P settings when your out and about. Great for new and seasoned riders when you need to know and you have not the manual with you. Thanks for watching guys

Пікірлер: 62

@scottbigley5126 2 жыл бұрын

Thanks for making these about the Vsett line, I own a 10+ for a few months now and didn’t know about the settings you showed! Real crap that the UK has such restrictions for PEV’s! Overe here in the states I only get cops admiring even asking me about it! There’s no helmet law in Michigan where I am but I always wear my gear as if you don’t own a Vsett, especially the more powerful ones you can get in a bad way quick so all be safe! And cheers to you for great videos, keep it up!

@escootermodificationguides2149 2 жыл бұрын

Your welcome Scott thanks for your support. I do love the Vsett 10 its just so capable which for me is needed as i cant legally ride it on public roads. I always envious of all vids i see of these being ridden in some stunning locations around the globe.

@Televisiontechnology 2 жыл бұрын

On the Vsett 10+ I also found when driving off-road or gravel, that got more traction in single motor mode and P12 throttle response best in the middle, otherwise can slide about a bit.

@papotaino1516 Жыл бұрын

Just got my Vsett 10+ today big help thanks

@ViktorHristovvv 2 жыл бұрын

Very useful, thanks!

@borisevraev8190 2 жыл бұрын

Hi, i have a question in some e-bikes or scooters order to change p settings you need to enter a password first where is this password is stored ? in the display throttle or inside the controller i mean if i have my p-settings locked and i will replace the display (qs-s4) will it help or the password stored inside the controller TIA

@Whereisgio 10 ай бұрын

I got a vsett display for my zero 9 what settings should I put to match my zero 9?

@TrevorChristie-gw4wn Ай бұрын

Hi there was wondering if you could help wondering what setting I should go to so I no if battery dieing

@pripiselisabeta1973 11 ай бұрын

Is there any phone app for the vsett 8 plus?thanks

@rogelbyrondelapena3624 2 жыл бұрын

Sir question, E10 lcd not turning on, lights are working. How to fix it sir?

@fabianc1650 2 жыл бұрын

Good job Alan.. instructive !😉👍

@escootermodificationguides2149 2 жыл бұрын

Thanks 👍 buddy, think i done this one to remind me also as i'm always forgetting when i'm out and about 😂

@fabianc1650 2 жыл бұрын

😂👍

@sambo7015 Жыл бұрын

I can not unlock the on-board computer after nfc settings. What to do?

@infinit280 9 ай бұрын

On vsett8 p15 at what should IT be kept

@Mike_Malloy 2 жыл бұрын

Thanks for the tips. The audio was a bit muffled on my end so hard to understand.

@happyhusband312 2 жыл бұрын

how to turn the lights on automatically each time.. that's the question:/ firmware update?

@treysanders4509 11 ай бұрын

Thanks. I read the manual but wasn’t understanding some of the stuff.

@MrExprise 2 жыл бұрын

If the speed limiter if removed is there a way I can apply a limit in the P settings? Can the 'gears' be changed?

@cluaxa1712 Жыл бұрын

Can’t remember which ones but there is a power one that goes 0-100

@MrExprise Жыл бұрын

@@cluaxa1712 yes found it! Thanks. By trial and error I managed to limit it so one gear matches my city's limits

@HelloMyFriend_ 6 ай бұрын

@@MrExprise And the other gears don't match your city's limits? Doesn't the law state that the scooter can't have the ability to go over the stated limit? I ask because we are only allowed 20 kph here in Denmark, and I don't want my scooter impounded. Can you set the maximum speed to 20 kph in P settings?

@scottg429 8 ай бұрын

Do the p settings affect top speed at all?

@harrison00xXx Ай бұрын

The maximum power for sure. I need to set it to about 44-47% to get about 25-27 km/h top speed (as some sort of software speed limit) The issue by doing it this way... it loses nearly all its acceleration and torque for uphill, rendering the scooter useless.

@SuperTorres76 2 жыл бұрын

Can you tell me how to turn the headlight on I've followed instructions but it hasn't worked. Cheers

@pacochawa2746 2 жыл бұрын

I think its hold down + for 3 sec. If not its the - for sure. Do same to negate.

@markhouck5258 Жыл бұрын

Thanks For Sharing If Only More VSETT Owners Would Stop Being Shy and Share Their VSETT WISDOM 🤪 Thx Again! ..... OG - Gone Electric ..... "OGGE"

@camj256 2 жыл бұрын

Anyone have their controller forget the p settings all the time? Its like it gets scrambled sometimes. vsett10+ here.

@presentpakistan5195 2 жыл бұрын

tanks 👌

@650_ollie 2 жыл бұрын

I got the vsett 8 how do I make it to mph it's on kph

@kyusan1974 2 жыл бұрын

Hola, lo modificas en P02.

@thechannelofrandomness6814 2 жыл бұрын

Question why does your nfc reader says 58? Is that the battery or what?

@EricMurilloProductions 2 жыл бұрын

That’s your voltage

@thechannelofrandomness6814 2 жыл бұрын

@@EricMurilloProductions thank you.

@fabianc1650 2 жыл бұрын

Hi Alan.. hope you are well? Please and what about the P15? I don’t understand it’s usefulness ? 😉 thank you

@escootermodificationguides2149 2 жыл бұрын

P15 is to do with th voltage the controller shut down. mine are set at 50v

@fabianc1650 2 жыл бұрын

Good evening Alan . That is exactly what I understood. But Mine are set at 52v however my scoot still work and contrôler Still work under 52v Thank

@fabianc1650 2 жыл бұрын

Sorry for my bad English .. it is very difficult for me to explain it with the right words

@mohyedineelbakkali9042 2 жыл бұрын

@@fabianc1650 just use translate

@JustBlondie 2 жыл бұрын

What are the other ‘P numbers’ for?

@fartthecat Жыл бұрын

I guess programm

@MrMasterDebate 2 жыл бұрын

How do I change it to miles per hour

@escootermodificationguides2149 2 жыл бұрын

P settings number 2, alternates between MPH and KPH

@luckyluciano4075 2 жыл бұрын

Thanks for the question you asked cause this is exactly why I can't to this channel! 👍👍

@takeshka0019 2 жыл бұрын

How off cruise control ?

@pacochawa2746 2 жыл бұрын

P17 turn to 0. Cruise control is a menace. Was letting go of gas in a turn then it keeps going...

@shadowmoon5445 2 жыл бұрын

Lmao a friend put there vsett setting acceleration p setting to edit 5. They're noobs and accident put there pinky finger on the throttle end, the vsett spun around into a helicopter and went through a shop window on its own🤦‍♂️

@julioenriquevargasdelahoz3530 Жыл бұрын

No hay algún truco para más velocidad de la vsett 8?

@rogergutierrez4967 2 жыл бұрын

Hello Question : How I can delete miles, to cero?

@escootermodificationguides2149 2 жыл бұрын

I dont think you can

@stephenhartley3292 2 жыл бұрын

P16 ODO Zero setting: keep pressing + for 5 seconds, but I don't know why you would use this.

@pntbllfun Жыл бұрын

To try to mislead someone when selling the scooter? Shame

@wilierlizard5249 2 жыл бұрын

i just want you to say the phrase "if you buy one, you get three free"

@milordas 2 жыл бұрын

For VSETT 10+ P07 should be 30 and P06 should be 9,6. OR P07 should be 32, then measurement would be correct

@stephenhartley3292 2 жыл бұрын

For VSETT 10+ I have left P07 on default which manual has at 28 and I have changed wheel diameter P06 to 8.8 to get accurate speed displayed, checked with GPS.

@escootermodificationguides2149 2 жыл бұрын

What setting are you running KPH or MPH, just interested to know.

@stephenhartley3292 2 жыл бұрын

@@escootermodificationguides2149 I'm running KPH and my top speed has been about 70Kph = 43Mph measured with gps on phone

@milordas 2 жыл бұрын

@@stephenhartley3292 that could work too, but in real theres 30 magnets in the motor, as i heard from whos counted them. Setting wheel diameter to 8.8, could cause in odo range misscalculation, need to test for it

@abundantharmony 2 жыл бұрын

@@stephenhartley3292 why did you change your wheel diameter to that?