Walk through of how to hack Rigol DP832 monochrome display to Rigol DP832 colour display Find links below Happy hacking! www.eevblog.com/forum/testgea... www.rigol.eu/En/Index/listVie... diskimager.org/
Пікірлер: 66
@user-df6lp8zw4g Жыл бұрын
Worked perfect for me with 1.16 firmware here in July 2023. Upgraded my firmware first and then did the individual upgrades using the Riglol site per your instructions in your other video. Did the color hack last. Pretty dam awesome and a big thank you.
@bryanpenny1104 Жыл бұрын
Your technique worked like a charm! thanks so much for sharing so logically and concisely.
@decem_unosquattro9538 Жыл бұрын
Very nice colour display ! 👌
@Elecifun Жыл бұрын
Thanks for watching
@gerykis Жыл бұрын
Thank you for this Rigol DP832 video
@gerykis Жыл бұрын
very nice description details !
@andrescombagomez8145 Жыл бұрын
Interesante video, gracias amigo.
@dixsusu Жыл бұрын
Now i see . Cheers !
@giubin Жыл бұрын
you are fomenting day by day the desire of a new power supply :D thanks. Anyway i prefer monocrome :)
@Elecifun Жыл бұрын
I would not mind the colour if I could have the monochrome layout, which I have just adjusted to. All's good.
@giubin Жыл бұрын
@@Elecifun I did a search and on settings you should have the classic layout for the display.
@Elecifun Жыл бұрын
Cheers, I looked through the Display Mode options and found Classic. It looks quiet nice.
@giubin Жыл бұрын
@@Elecifun awesome!
@graxxor6 ай бұрын
fomenting?
@BobGarrett667 ай бұрын
Awesome! Thanks for the video. I don’t suppose you are also able to get 1mA and 1mV resolution as opposed to the 10mA and 10mV resolution on the “stock” 832?
Buenas noches tengo un problema acabo de adquirir mi Rigol dp832 sigo todo tus pasos descargo la llave luego voy al programa lo paso al pendrive luego abro ultra sigma enciendo el modo lan luego que pongo su ip le doy test y allí insertó el pendrive le doy Add luego ok y me dice la máquina lo mismo 832 y no dice 832A no entiendo alguien me podría ayudar 😭
@CreativeTechno10 ай бұрын
Great video, thank you! After the hack, can you set the screen back to the three vertical rectanges with a colour for each channel, instead of the display as shown in time stamp 11:20 where it's split up?
@Elecifun10 ай бұрын
Yes you can! Check out the thumbnail.
@tonysfun8 ай бұрын
I have DP831A (I think it is A but it's not printed on the front of the Rigol as such. My Rigol started flashing this message: "CH2 overcurrent protection, disable the output of CH2"! But no output is selected and if I try to use the CH2 output it turns itself off in less than 1 second. Any ideas how to fix this problem? Thanks for your videos!
@Elecifun8 ай бұрын
Hi Tony.. The 'DP831A' is shown on the front of the PSU. Sounds like CH2 has a short, maybe output transistor. It's hard to say, especially without seeing the fault.
@tonysfun8 ай бұрын
I was gonna charge a battery, like I always do and it did not show the voltage of the battery and complained at first of OVERHEATING so I shut it down and rebooted, but than it was complaining about CH2.... I don't know how much these power supplies cost to repair and or where to send it. What I was able to measure under: Power off- no short anywhere. Power on - 5V/5A has 5.1mV; +30V/2A has 1.03V; -30V/2A has-16.8V Measuring for a short - 5V/5A has a short and -30V/2A has a short. Thanks for your help!
@Elecifun8 ай бұрын
@@tonysfun Make a short video for me, showing from switching on the power and the issues themselves. Make video unlisted if you like and put the link here. I can see in seconds what you are describing and more hopefully. The link will be held for my review invisible to others, unless you want it shared. 👍
@decem_unosquattro9538 Жыл бұрын
I might be buying one of these soon. 😂
@raulperezgomez81028 ай бұрын
I get the :PROJ:SET MODEL,DP832A command is incorrect. Any clue of what could be happening?
@Elecifun8 ай бұрын
All I can say from here is check again, pay attention to the syntax, it works for others.
@Helpful8963 ай бұрын
i think there is a space between MODEL , and the comma
@decem_unosquattro9538 Жыл бұрын
Hey amigo ! What's this? A firmware upgrade?
@Elecifun Жыл бұрын
The software on the DP832 is limited. All this does is tell the 832 its a 832A, all good.
@decem_unosquattro9538 Жыл бұрын
@@Elecifun oh okay. I read somewhere that the only difference is just a software upgrade. That obviously what you've done. Beaudy!
@decem_unosquattro9538 Жыл бұрын
I just discovered that resistors come in different wattages lol 😆
@Elecifun Жыл бұрын
Really, how did you find that out?
@decem_unosquattro9538 Жыл бұрын
@@Elecifun well I was researching a product for a new project and it said 1/4 W. I thought wtf does this mean? So I looked up resistors and wattages and there it was. Resistors come in different wattages not just resistances. It's like suddenly finding a piece to a jigsaw puzzle. Lol 😆
@decem_unosquattro9538 Жыл бұрын
@@ElecifunIt an epiphany! :-D
@decem_unosquattro9538 Жыл бұрын
Are you okay sir? I think you're a bit like me. Are you sleeping into the crack of noon?
@Elecifun Жыл бұрын
Hi, no I don't sleep in, Iv'e did that for years and it did not help me. I go to bed early and get up early. I have cats that demand I get up early. I have a disorder which I was diagnosed with in the 90's but only found out about when I moved in here. Stems for crazy upbringing.
@Elecifun Жыл бұрын
How you doing?
@decem_unosquattro9538 Жыл бұрын
What's happening over there? Any new project builds? Night. 🌙
@Elecifun Жыл бұрын
Yeah I am just finishing one last hack for the Rigol DP832, then audio amplifier with great specs.
@decem_unosquattro9538 Жыл бұрын
@@Elecifun What's the hack on your rigol bt psu??
@decem_unosquattro9538 Жыл бұрын
@@Elecifun Audio amplifier hmm that sounds mighty interesting amigo 🤔 I had a friend years ago that started teaching me a little about electronics. He was 17 back then and I used to visit his place on a regular basis. Anyway he used to show me all his latest projects. One of them was a very complicated class h amplifier not sure if it was a preamp or a power amp. Anyway back then there was no ordering of pcbs. You had to buy chemicals and perf board and etch it yourself. Well that's what he did. After a few weeks he started building it. It was most interesting as he added more and more components to his home built main board. Finally he added the completed board with components to an enclosure. Added the rubber feet, the brushed aluminium case. Light, on off toggle. It look very amateurish yet omnipotent! One day we went into Melbourne to pick up the 16" bass drivers with the mids and the tweeters. It was cool how after weeks he had the speaker boxes assembled with huge holes for the bass drivers. Finally he added the speakers to the boxes and made the cross overs etc. Then that evening he flicked the switch and did some tests. Then he attached a turntable to the preamp and power amplifier. Next thing he put a vinyl record on the turntable. The record starts to turn ... Wow ! The sound was incredible! I'm trying think what he played first?? I think it was Fleetwood Macs "Rumours" album. Wow it was amazing ! It was like we were really sitting in front of a real band. 100W RMS x 2. It wasn't just loud it was very high quality audio. So yeah building an amplifier is a most interesting topic. 🤔 😀 👍
@Elecifun Жыл бұрын
Its more of a mod.. a quiet fan as the Rigol can be a noisy PSU with its stock fan.
@Elecifun Жыл бұрын
Brilliant, you may like this one. I'm not good with wood (no tools) but I can find a good circuit with plenty of documentation for the whole electronic build. 60 Watt into 8 Ohms 100 into 4 Ohm, per channel. I love Fleetwood Mac especially the Rumours album, only on CD, still its great.
@decem_unosquattro9538 Жыл бұрын
Is that legit amigo?? 🤔 😀
@Elecifun Жыл бұрын
Legit...um yeah sure of course. Nothing to see here ; )
@decem_unosquattro9538 Жыл бұрын
@@Elecifun lol 😆 ;-)
@crazyphil33 Жыл бұрын
I’m sure it’s legit as when you could unlock all the optional extra’s for free, some years back! 😉😅👍🪛
@Elecifun Жыл бұрын
The extras are still unlock-able even with latest firmware.
@decem_unosquattro9538 Жыл бұрын
@@Elecifun Oh, okay, so you gotta pay to get the other features.
@nikitamosov6768 Жыл бұрын
дайте софт для него
@Elecifun8 ай бұрын
I showed how to get the software.
@crazyphil33 Жыл бұрын
Thanks for a cool vid, very clear and concise. I’ll definitely have a go with my 832 now! 👍🪛🤓