Everything You Need for Engraving

No video

Everything You Need for Engraving - Rio Buying Guide

Рет қаралды 36,810

Күн бұрын

One of the most frequent questions asked is, "How do I get started engraving?" Join Shane as he discusses everything you need to get started on this ancient art form. He covers the different tools used in hand engraving, recommends his personal preferences, and provides additional resources to beginner engravers such as Jason Marchiafava's Art of Ornamental Engraving class.
Next, Shane covers power-assist engraving tools. While pricier, these tools enable you to make cuts much easier than hand-push engraving tools. Shane shares his favorites (including the very tool he started engraving with himself), covers sharpening and maintenance, and discusses different options for holding the piece you are working on. Lastly, Shane covers microscopes, an absolute essential for seeing what you are engraving. Stay sharp!
Check out the products used in this video:
GRS® C-Max® V-Point Graver, 120-Degree - ow.ly/qLVp30rLSy6
GRS® GlenSteel® V-Point Graver, 120-Degree - ow.ly/mkOZ30rLSJu
GRS® Quick-Change Manual Handle - ow.ly/ReAK30rLSJH
GRS® Standard Engraving Block - ow.ly/wN8530rLSJS
Lindsay BenchJewel® ArtGraver™ Set -
The Art of Ornamental Jewelry Engraving with Jason Marchiafava - ow.ly/2Y5K30rLSKG
Lindsay Sharpening Fixture with 116-Degree Template - ow.ly/L32e30rLSLc
GRS GraverMach AT - ow.ly/eJ4M30rLSLt
Leica® A60 Microscope with Acrobat® Stand - ow.ly/ZQMO30rLSLJ
Jett Sett Ballistic™ Fixturing Compound - ow.ly/JSRa30rLSLY
GRS® GraverHone® with Apex Sharpening System - ow.ly/osff30rLSMf
Rio Grande stands for makers who create with their hands and their hearts and who are courageous enough to make jewelry their livelihood.
Connect with Rio Online:
Visit Rio's Website:
Subscribe to Our Channel: ow.ly/dAbu309U7eg
Find Rio on Facebook: ow.ly/DpRd309U63Z
Follow Rio on Twitter: ow.ly/wdtU309U6oF
Follow Rio on Instagram: ow.ly/eu5A309U6vM

Пікірлер: 57

@classicuniquegifts9704 2 жыл бұрын

After 5 years of practice I just sold my first engraved project. I've chosen to take one of the best engraving lessons in life due to lack of time. The hard way to get started engraving. These videos make me happy to see especially when Lindsay Engraving Tools are in them because I've used Lindsay for the past 3 years and he really stands behind his product and just the sounds of the impact the tool makes inspires me to continue pushing myself to be better. Highly recommend this art to anyone.👍

@RioGrande1944 2 жыл бұрын

Hello, thank you for your feedback, we really appreciate you taking the time to share this with us. We love Lindsay Engraving Tools as well! Keep on engraving! 😊

@peter4Flags Жыл бұрын

Well done ! 👍

@18solcat 5 ай бұрын

This is the best “how to” KZfaq video I’ve ever seen on any subject. Informative and too the point. Well done.

@MrDutchman100 7 ай бұрын

Hello I started learning how to make Jewelery watching youtube videos how to Sadler silver and gold, stone setting but I have always had a fascination with engraving. I purchased my tools from Rio grand they have the best stuff, unless I win the lottery it’s out of reach. Great video hope to see more.

@patrickosullivan4354 3 жыл бұрын

Looking forward to seeing more from this! When I was in school I hated using the microscope, so I just switched to using my cell phone propped up on an Armature.

@sabrinastorey7122 2 жыл бұрын

3 3f4 73cr4

@andrewhahn1983 2 жыл бұрын

I'm looking forward to more of this series

@joycecosta3236 Жыл бұрын

We're sharp, friend! Thanks.

@WisdomDaCosta 2 жыл бұрын

Fantastic video. Really useful and informative. Thank you

@RioGrande1944 2 жыл бұрын

You are quite welcome!

@jenniferking8549 Жыл бұрын

Hi- I have invested in a cheep microscope- cheep graver ball- and have been practicing hamd graving. I purchased a very used Gessewein on ebay and rehabbed it- new jars, belt, hoses, etc. BUT- it doesnt have the power I see wirh newer gravers. I am strongly considereing purchasing the Linsey system.

@lescrooge 11 ай бұрын

Thank you.

@applepie9806 3 жыл бұрын

Yessss!!! I've been waiting for this forever

@RioGrande1944 3 жыл бұрын

Apple Pie, we are glad you liked the video, be sure to check out more of our content!

@AdamHunt-zt6kx 3 ай бұрын

Great info, thanks for sharing. I'm new too engraving and I'm wondering if there's a platform to buy used equipment such as pneumatic engravers / vices / microscopes and such?

@Aerodauphin 2 ай бұрын

Hi Shane. I just purchased my first power assist graver by Steve Lindsay. I purchased it from Rio. Unfortunately, no one has a specific information about the connections to the compressor. So how do I take this system and connect it to my silent air compressor? After two weeks of digging and talking to my friends that jewelers and stone setters; I have found that each one of them had handpiece failures because no one recommended a 3 stage filter that’s fairly inexpensive. Everything all together is still less expensive than GRS.

@celineestrada1814 Жыл бұрын

this is an amazing video! thank you ♥️

@RioGrande1944 Жыл бұрын

It is our pleasure ☺

@stratosk6408 3 жыл бұрын

The most game changer tool on engraving art is microscope

@jacobnewman8891 2 жыл бұрын

Awesome video!

@RioGrande1944 2 жыл бұрын

Thank you!

@seanwirth325 3 жыл бұрын

hi, could you go more into sharpening and shaping the engravers. i've had to reshape almost all the gravers that i get, so they don't just dig into the piece.

@RioGrande1944 3 жыл бұрын

Hello sean wirth! We will get in touch with our tech team and get you and expert answer!

@RioGrande1944 3 жыл бұрын

Sean wirth we have a great video made by Grand Master engraver Sam Alfano www.riogrande.com/product/grs-easy-step-by-step-graver-sharpening-dvd/560238 , this video offers step by step sharpening instructions to get you the best results!

@seanwirth325 3 жыл бұрын

@@RioGrande1944 i would buy it if it were downloadable. but i don't need anymore dvd's

@RioGrande1944 3 жыл бұрын

@@seanwirth325 understandable, here is a link to our resource center where we have content on a variety of topics www.riogrande.com/category/resource-center/search-results?queryTerm=engraving&tags=&contentTypes=&pageSize=32&categoryId=&page=1&searchType=1 . We hope this is helpful!

@RioGrande1944 3 жыл бұрын

@@seanwirth325 We also wanted to inform you that your feedback is highly valuable to us as your inquiry will be taken into consideration as we continue to make educational and informative videos in the future

@sonlam1642 3 жыл бұрын

Thanks teacher engraving so much,

@RioGrande1944 3 жыл бұрын

Thank you for watching Son Lam, be sure to watch our future content!

@sonlam1642 3 жыл бұрын

@@RioGrande1944 yes

@d00dl3SEd Жыл бұрын

I want to try star settings, but I don't know what graver to get for it.

@samplasse9886 Жыл бұрын

This might be a stupid question, but where do I buy the metal in itself to do engraving with? Like I really would like to make belt buckle plates but got no idea what to buy for it😅

@olegpetelevitch4443 9 ай бұрын

Hand push 3rd generation hand made jeweler !

@akselakscell2677 9 ай бұрын

Does the de EnSet has the same sensetiveness with grs whats the difference of these

@engraverjay 3 жыл бұрын

Awesome 👏

@RioGrande1944 3 жыл бұрын

J Fava, we are glad you liked the video!

@shamshodsharipov7962 3 жыл бұрын

Good job 👍👌

@RioGrande1944 3 жыл бұрын

shamshod sharipov, thank you for waching!

@sonlam1642 3 жыл бұрын

I like your video , all your video I neet see next time video

@peter4Flags Жыл бұрын

Just a long shot. I’ve recently taken up making Claddagh rings ,but getting to engrave 3 straight lines to make four fingers of the hand is a challenge . Can you recommend a graver ? And maybe a technique please. As you may deduce I am a beginner in engraving . Thanks Rio Grand

@RioGrande1944 Жыл бұрын

Thank you for the question! Here is a response from our tech team: GRS® High-Speed Steel Quick-Change Onglette Gravers - RioGrande I prefer to mount my gravers in the following, Quick-Change Manual Graver Handle with Three Tool Holders - RioGrande The technic is the same as any other graver, just push it through the metal. I hope this information has been helpful.

@peter4Flags Жыл бұрын

@@RioGrande1944 Thank you very much for your kind reply I’ll check it out.

@BobotBalacanao 8 ай бұрын

Sir I need egriving mashine plss help mee

@1m_slaying 2 жыл бұрын

What metal is it that is so easy to just carve out like that?

@sixtonshark2854 8 ай бұрын

well maintained tools made of quality steel make cutting look easy. I would guess that it's brass in the video, but keep in mind that engraving is also employed in printing and gunsmithing, which use very hard metals indeed.

@angelfranco5809 3 жыл бұрын

You basically need $3,000 to $8,000 dlr to start 🤯 good luck with that humans

@johnsmalldridge6356 3 жыл бұрын

Actually you can get started way cheaper and buy more expensive tools as you learn and can afford them. You can also purchase used tools.

@jakeasinjake3347 3 жыл бұрын

Jewelry making and related fields are unfortunately very expensive

@patrickosullivan4354 3 жыл бұрын

So much of our equipment can be purchased from other Industries for much cheaper. As soon as you put jewellery in the title, you can add a zero to the price tag

@johnsmalldridge6356 3 жыл бұрын

@@jakeasinjake3347 they can be but I’m a jeweler and I know other people who do it as a hobby. Working with copper or silver and basic hand tools is a way to enter the field and learn skills without breaking the bank. Start small and add as you learn. If you really want to learn to work on jewelry then find a jewelry trade or repair shop and ask for a job or trade work for training.

@applepie9806 3 жыл бұрын

Lol, nah, you don't. The ball vise can be replaced with a 360 vise + thermoplastic. I got one for 33 dollars, thermoplastic's 4. the 120 degree is on ali for 15, and the machine is a couple of hundreds there too. Don't buy leica, leica is a luxury brand, there's microscopes on alibaba for 200-300 or just use your phone like that smart guy in the comments. I may be human, but I'm a smart human. :p America buys everything from China even as they yell about chinese, so you go straight to the source.

@Sheepdog1314 3 жыл бұрын

you have to know how to draw and design first. Unless you want to copy someone all the time. Engraving is not something you learn overnight. And, you may not have the talent. It's not like making jewelry. A bad engraving shows every design- or cutting flaw.

@RioGrande1944 3 жыл бұрын

We appreciate you watching Sheepdog9!