Rivet Gun Review - Milwaukee M12, Proset XT2, Harbor Freight

Рет қаралды 18,849

2 жыл бұрын

I discuss my use of three rivet guns that I’m using in my build of a Sling TSI Experimental Aircraft.
Link to Proset XT2
amzn.to/3EXumMy
Link to Milwaukee M12
amzn.to/3vrgGGF
Harbor Freight
www.harborfreight.com/3-16-in...

Пікірлер: 21

@michelledorch7588 Жыл бұрын

just purchased the Proset xt2. thanks for the video

@aviationkitbuilder Жыл бұрын

Thanks for watching and keep an eye out for my one year update video on my XT2.

@lesliewilson2677 2 жыл бұрын

Riveting video!

@aviationkitbuilder 2 жыл бұрын

Thanks for watching.

@YoursAkki81 Жыл бұрын

Thanks for this amazing video. but i have doubt. So do we need to put the hole first before putting the rivet ? or does the riverte does the job of creating a hole and then insert rivert by itself ?

@aviationkitbuilder Жыл бұрын

The hole has to be drilled first and then you insert the rivet and then pull the rivet with the rivet gun. Thanks for watching.

@bourgsusan 6 ай бұрын

We have a 24' box trailer that has screws holding the outside panels instead of rivets. We have to take out all screws and replace them with rivets. Should we hire a professional since there are probably 200 screws? If we do it which Rivets gun would you use?

@MikeBaxterABC 2 ай бұрын

0:57 Whoa!!! If you don't know something look it up!!! .. The POP® Rivet company is alive and well!!! Now owned by tool giant "Stanley " ... The rivets are still the best and most reliable product AND made right here in the USA !!! I just got an order in of 300 all Aluminum closed end Pop Rivets from my supplier yesterday !!

@aviationkitbuilder 2 ай бұрын

Great, thanks for the information.

@rakeshviswambharan8317 Жыл бұрын

@aviationkitbilder, I do not think the Milwaukee rivet gun issue that you have reported, has to do with corrosion in internal parts. My brand new piece has the same problem, where in the tool does not suck in the mandrel in to the collector. Also the first time, the rivet just got jammed which reportedly has been reported by many other users. Also today I started riveting the Empennage Rear Spar channel and the tool just does not consistently pull the rivets.

@aviationkitbuilder Жыл бұрын

Perhaps, sorry to hear you are having issues with yours. I liked the idea of the Milwaukee gun a lot (battery instead of air lines, and price) wish it had better reliability.

@Montano214 Жыл бұрын

Getting tired of all the problems i got with the air compressor i have. I need that Milwaukee gun asap

@ericlaw2416 2 жыл бұрын

Can you point me to the extra tip you needed for the XT2?

@aviationkitbuilder 2 жыл бұрын

It’s the 3/32” size nose piece for the 2.4mm rivets. It normally goes with the XT1 but will fit the XT2. Here’s the part number information from three day tool. PRN314 NOSE PIECE 3/32 OPEN END RIVETS Part #119

@ericlaw2416 2 жыл бұрын

@@aviationkitbuilder Thanks. My XT2 is still in it’s box waiting on a kit. Wasn’t sure if it came with everything needed.

@aviationkitbuilder 2 жыл бұрын

I don’t think there are all that many of those small rivets but you’ll need something to pull them.

@jorgegarcia3010 Жыл бұрын

Good morning everyone. I hope someone can help me, I am about to buy the PROSET XT2 riveter, but I would like to know if someone already has it with them so that they can help me to know the diameter of the nozzle for the rivets, the area where I am going to rivet has a space of 8.88mm wall to wall and has a depth of 8.5mm, I would like to know if the nozzle can go in here. I hope someone can help me with this.

@aviationkitbuilder Жыл бұрын

I would say no, it won’t fit. The actual changeable tips are about 6mm long depending on which size and have a diameter again depending on size ranging from 5-8mm. After the end of the tip it flares out to 11mm as it screws into the nose piece. Try finding a small hand riveter maybe. I have three guns and a hand riveter and none of them would work with your dimensions.

@jorgegarcia3010 Жыл бұрын

@@aviationkitbuilder Very good. Thank you very much for taking the time to answer, I really appreciate it