How To Rebuild the Carburetor on a Yamaha PW50

Рет қаралды 24,338

Күн бұрын

Yamaha PW50 Headquarters: rmatvmc.link/pw50-carb-rebuild
Carburetor components can get gummed up quickly with today's fuel, especially on smaller bikes like the Yamaha PW50. So, whether your PW has been sitting for a while, leaking fuel, or just running poorly, chances are your carburetor could use a thorough cleaning and rebuild. In this video, Charles shows how to remove, clean, and rebuild the carb on a Yamaha PW50.
Check out www.rockymountainatvmc.com/?u... for all your parts, apparel, and accessories!
Click Here To Subscribe To Our Channel!
/ @rmatvmc
Follow Rocky Mountain ATV/MC On Social Media!
FACEBOOK: rmatvmc?utm_...
INSTAGRAM: rmatvmc?ut...
TWITTER: RMatvmc?...

Пікірлер: 19

@rmatvmc Жыл бұрын

Check out the Yamaha PW50 Headquarters here: rmatvmc.link/pw50-carb-rebuild

@816Pitbike Жыл бұрын

Awesome Vid! Now I can fix my PW50

@tackleberry933 Жыл бұрын

Nice video a little more in-depth than what’s on KZfaq

@rmatvmc Жыл бұрын

Thank you! Glad it was helpful.

@aklaunch 11 ай бұрын

Thank you for your videos. It is always the details. And you always cover those.

@Mrtimmo92 4 ай бұрын

Thank u, nice video

@entropy5125 Жыл бұрын

Do a kx100 woods build.

@user-ec9qn5db6l 6 ай бұрын

Do you have to bleed the oil line when you reconnect it? If not, how come?

@lelandcamara7491 Жыл бұрын

Can you do a video on the throttle and choke, set up i feel like it’s confusing

@marcussmith4149 8 ай бұрын

Why are you not removing the idle screw?

@kevinbailey7052 11 ай бұрын

Is this good for only the past few years or will this carb work on an early 2000s model as well

@rmatvmc 11 ай бұрын

There have been small changes but this carburetor has been largely the same since this bike came out in 1981.

@Dirtbikecentral871 Жыл бұрын

I just replace my carburetor with the qa parts one and I just can’t get it to run right I put a new throttle cable at the same time the bike only runs at full throttle and barely so at that any tips will help

@rmatvmc Жыл бұрын

Hmm, is the throttle stuck open? I'd recommend pulling the air box off and verifying that the slide is sitting all the way down in the carburetor body. It might need some adjustment with the throttle cable/idle adjuster. Let me know what you see and we'll go from there. -Charles

@Dirtbikecentral871 Жыл бұрын

@@rmatvmc I think I got it figured out. I believe I got a defective carb. The float bowl sits to high I can get it to run a little better with the air screw all the way out but it is no a permanent fix. I spoke with a RM customer service tech and he said QA part’s should contact me tomorrow. The customer service at RM is unmatched in my opinion. I’ve never been left with a defective part.

@robertcarlos78 4 ай бұрын

So you didn’t show how to take that last hose.

@rmatvmc 4 ай бұрын

That's the line that comes from the oil pump. It doesn't need to be routed anywhere, just remove it from the carburetor when taking it off and hook it back up when going back together.

@robertcarlos78 4 ай бұрын

Thanks the reason I had ask was because on mine the hose don’t have a regular clamp is like crimp on the hose.