Complete Truck Service(Change Oil/Filter/Air Dryer Cartridge, Grease, Check Axle/Transmission Fluid)

Рет қаралды 197,584

Күн бұрын

Complete Truck Service(Change Oil/Filter/Air Dryer Cartridge, Grease, Check Axle/Transmission Fluid)
#truckservice #oilchange
Video Content:
00:00 - A Complete Semi Truck Service Intro
08:36 - Drain Engine Oil
10:19 - Change Oil Filter
17:33 - Change Fuel Filter
25:00 - Change Secondary Fuel Filter
30:38 - Add New Oil to Engine
34:02 - Change Air Dryer Cartridge
42:02 - Change Engine Air Filter
45:11 - Grease Semi Truck (Kenworth T660)
01:03:02 - Check Back Axle Differential Fluid Level
01:05:02 - Check Transmission Fluid Level
01:06:54 - Start Truck Engine and Recheck Engine Oil Level
01:09:53 - Full Semi Truck Service Summary
Video Recommendation: Oil Change
► • Semi Truck Oil Change ...
📢Exciting News:
Our online store is officially launched - Shop the largest collection of DPF, DOC, SCR & One Box at a price you will like!
► DPFDiscounter.com
Business Info:
FTT Fleet Solutions - Fleet Solutions to Help Fleets to Run Smarter & Save Bigger)
► Address: 1120 High Ave SW Canton, Ohio 44707
► Phone: 330-573-5396 (for business only)
► Email: info@fttfleet.com
► Diesel Emissions Specialists (DPF Cleaning, Aftertreatment Emission Diagnostic & Repair)
maps.app.goo.gl/qUCbctm6ZCxF6...
► Diesel Force Cleaning - clean the entire engine
fttfleet.com/pages/diesel-mai...
► Best engine and aftertreatment warranty you should have - NTP warranty
fttfleet.com/pages/ntp-warranty
► Remote diagnostic - remote regen and clear faults while your truck is thousands of miles away
fttfleet.com/pages/software-s...
► Polar Fox eAPU - The most advanced and affordable electric APU for trucks
www.polarfoxapu.com/
Shop the largest collection of DPF, DOC, SCR & One Box at a price you will like!
► DPFDiscounter.com
Connect with us on Social Media Platforms:
► KZfaq: bit.ly/35YO3kN
► Instagram: bit.ly/3C7hRy6
► TikTok: bit.ly/3QxGHMT
► Facebook Page: bit.ly/2QqBuZ0
► Threads: bit.ly/3KmNp6P
► Trucking Facebook Group: bit.ly/34TbQXQ
My Favorite Products for trucking & truck repair needs from Amazon:
► amzn.to/3xZkDn3
Awesome Products and Services We Recommend:
► OTR performance diagnostic tool (super easy scan tool every trucker needs) - use promo code road3333 to get $100 off: bit.ly/3O3wshT
► Rock Rooster offers the best work boots for you. Use channel-exclusive promo code road3333 to get 12% off of your order today. bit.ly/3HFLFDu
Want to work with our channel? Email us for more details
truckingandfixingwithryan@gmail.com
-----Disclaimer-----
The information and instructions provided by Trucking & Fixing with Ryan KZfaq channel is for general informational purposes only. All information on the channel is provided in good faith, however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability, or completeness of any information on this channel. Some product links are affiliate links which means if you buy something we'll receive a small commission.

Пікірлер: 188

@karlmalone2464 3 жыл бұрын

It makes me sad this channel doesn't have a million subscribers. I'm off work for winter and considering switching to O/O. I learned a lot from your insightful content.

@truckingandfixing 3 жыл бұрын

Thank you David! We are growing, hopefully more and more people will discovery this channel. 👍

@carlsisi9712 2 жыл бұрын

Most of the time when an air-dryer is exhausting every 10-20 seconds is a sign that the air compressor never stop's pumping air in the tanks, generally it is caused by a faulty air governor or a blown or clogged air signal hose from the governor to the compressor. For the king pins, if possible would advise to lift the front axle up to grease the bottom part to take away the weight of the front of the truck allowing for better ideal lubrication of the bottom bearings otherwise they may ware up faster. Keep giving it some love and it will last you countless miles.

@brunodelaw8329 2 жыл бұрын

You just have me a more reason to go after my passion, which is mechanics. Much love Ryan.

@shenandoahyoung2396 2 жыл бұрын

Just got my first truck w/a Cummins. You just saved me a load of cash. Appreciate you

@truckingandfixing 2 жыл бұрын

I am glad to hear that! Good luck with the new adventure.

@devonb6400 2 жыл бұрын

I just got my truck and I’m super excited to do my own PM. Cummins engine as well. Hope all goes well for me

@patrickdehertogh2080 2 жыл бұрын

thanks, Some reason I miss my days of working on trucks, and equipment. and the old gravel pit, So now i can vicariously watch you. I must have some weird sickness. I still like trucks

@truckingandfixing 2 жыл бұрын

Lol! You are like me missing working on farm equipment. I have many videos coming for you to watch! 😀

@robpeters5204 6 ай бұрын

When ever you are greasing the front end especially the king pins, always jack up the front end to get the weight off the suspension. It helps to get the grease in that tight tolerance a lot easier. Put a bottle jack in the middle of the beam and jack it up so the tires begin to spin.

@brandonjhester 3 жыл бұрын

I like to punch a hole in the center of the oil filter to drain for nice clean removal!

@traingp7 4 күн бұрын

Punching a hole in the bottom of the secondary filter with a punch and letting it drain is a good way to not make a fuel mess all over the place.

@angrybears26 2 жыл бұрын

Hey, thanks for posting such a comprehensive and straightforward presentation. You were clear, you used quality video equipment and you kept it simple for mechanical noobs like myself. Thank you, I appreciate it!

@truckingandfixing 2 жыл бұрын

Thank you!

@Perry-pg4iw 2 жыл бұрын

You are not just a Gem you are a real diamond

@vanessarivera5267 3 жыл бұрын

This video helped me learn the basics very well, I’m new to the semi world, I can’t thank you enough for posting these types of videos! Keep up the good work!

@nikolaysedletskiy5076 2 жыл бұрын

Thank you Ryan, just started trucking company with my friend and this video is really helpful to understand what has to be done to our trucks and what to focus on and check on daily basis. Much appreciation for this guide.

@truckingandfixing 2 жыл бұрын

Good luck 👍

@dubstrippin 2 жыл бұрын

😬

@erhan6095 11 ай бұрын

I'm not a truck driver but I love to watch maintenance videos.

@StickNclutch 3 жыл бұрын

Your fuel filter with that heating element is much better than davco filtration system IMO

@9mccloud 2 жыл бұрын

Yes trustworthy shops are very much need. Thank You for sharing 🙏🏿👍🏽🙏🏿🙌🏾

@truckingandfixing 2 жыл бұрын

You are welcome!

@TxJacob713 2 жыл бұрын

The oil fill has a built in funnel. Pull on the yellow thing inside of it and it will pop out, makes putting oil in a little bit easier.

@dorkydarell4073 2 жыл бұрын

😳😳😳 Wow son!!! That's a big help to the trucking family!!! Great 😃👍 video sir!!! Dm

@truckingandfixing 2 жыл бұрын

Thank you!

@chickenbuttdeluxe 2 жыл бұрын

First of all , thanks for the video . Now.. I think we can all agree that if a person needs to watch a YT video on how to service a truck , they don't have any business owning or driving a commercial vehicle.. thank you for your service 👊

@klonkimo Жыл бұрын

I mean I have other skills, like learning from Ryan and other people. I wasn't born a trucker, I learned how! He's a great teacher and puts effort into it that he absolutely doesn't have to.

@clutchitup9861 3 ай бұрын

You're right. We should already know what we don't know. How dare we not know everything and seek to learn something new! Jesus what a fucking stupid sentiment. And I'd argue that there are tons of things in your life that you use every single day and have no idea exactly how they work, and yet you still use them.

@roland2683 3 жыл бұрын

Great video Ryan...really appreciate you taking the time to video this in the winter and this shows your thoughtful nature. God Bless!

@DucTran-lo7sj 2 жыл бұрын

Thank you so much for all you do sir. I binge watch all of your videos and I am still watching them.....

@lancesmith1925 Жыл бұрын

Hey, look I know I'm coming into this party a little after you first posted this but I really had to take the time to echo much of the sentiment already expressed here and say thank you. The information, the how-to, the camera work so we can clearly see were all first class. It's incredibly impressive that you and others like you so willingly share the expert knowledge you've accumulated for the rest of us to benefit from. Thank you again and wishing you and the family all the success in your ventures.

@thereckchanic4709 3 жыл бұрын

Great videos as usual, I'm always learning from you.

@Dead-Goldstar 2 жыл бұрын

Thank you for the video it was very informative lots of good information on what’s need to be done definitely will be watching for any other videos you do . 👍

@manuelhernandez-pr5iv Жыл бұрын

great content Ryan I appreciate your channel! I am a local p & d driver trucking in Motorcity learning every day hopefully become a owner operator soon. Thank you for your hard work & please stay warm. Manny

@abh1271 3 ай бұрын

THE ONLY HONEST MECHANIC ON THE PLANET. THANKS AND GOD BLESS YOU ❤

@MN-bn6gk Жыл бұрын

Greatly appreciate your posting

@sabedinveliu4473 Жыл бұрын

Ryan, respect for you man

@jeffreybass7420 3 ай бұрын

Thanks so much for your channel. From the information you presented, I was able to do a complete truck service on my truck for the first time.

@SeptemberTwentyThird 2 жыл бұрын

Nice video man! I appreciate you showing us the grease points.

@truckingandfixing 2 жыл бұрын

Thank you!

@klonkimo Жыл бұрын

This. Just joined up with a company that needs us to grease since we're out for 5wk to 3mo at a time. I have no problem doing it, but my mechanic is an ass but also an old school trucker! Love him but it can be hard to learn from him.

@colt2206 6 ай бұрын

Good to see that you prefill that filter. Sure be nice to have a warm shop to be doing all that work on it. Looks cold there

@danielstory4735 2 жыл бұрын

my family has been in the trucking industry most of my life I chose to be in construction business I'm 40yrs old have been all over united states and I'm real familiar with trucks so I decided to go work for cfi for a starter company I think they will be great

@jessesnell1911 2 жыл бұрын

Great work on making this video. It was very helpful. I like how the person holding the camera gets every detail of the job done. It helps me because I don't know anything about mechanics or trucks, so now I have a visual reference that I can recall on when I do the work myself. You missed a few things that I wish I could see though. For example, around the 36:00 mark, you were releasing the rest of the air out of the system by pressing the brakes. I wish I could see that process. The camera person was standing outside watching, but I could not see exactly what was going on inside. You said that maybe 30-40 fitting need to be greased depending on the truck, which is helpful. But I wish I could see all the fittings being greased. This helps me because I don't want to miss any, in case I do the job on my own. Also, when you were kicking up the RPM to 1000 to fill the fuel filters so they don't die out, you were inside the truck and I couldn't see exactly what you were doing in inside. From my understanding you need to press the gas pedal to get higher RPM. So I don't understand how you kept the RPM up while you were walking outside checking for leaks. Aside from that, this video was great and very helpful. Thank you for sharing this with us. This was a nearly perfect video. 👏👏👏

@jasontengan1233 2 жыл бұрын

Probably engaged the cruise control to about 1200 rpm!

@ganboldbayantsagaan2560 6 ай бұрын

Thank you so much for this great video.

@Parrmvir 10 ай бұрын

Thank you Ryan.

@arthurcitron9774 4 ай бұрын

Spot on!👊🏻🇺🇸

@michaelbritton2331 2 жыл бұрын

thanks Ryan you are the 🐐 one of the best to do it and also ability to fix and drive.your educational videos are invaluable i have done my own clutch transmission replacement genset maintenance etc.thanks for the time putting videos together.

@truckingandfixing 2 жыл бұрын

I appreciate the nice words. Thank you!

@michaelbritton2331 2 жыл бұрын

@@truckingandfixing you welcome 🙏 Ryan and continued success in everything you do..

@richardmarshall1883 2 жыл бұрын

That yellow insert in the oil fill tube comes out

@arionmelton9034 Жыл бұрын

Get well soon

@teddyrivas1082 2 жыл бұрын

Hey Ryan! Haven't heard from you in awhile! Hope all is well with you and family!

@truckingandfixing 2 жыл бұрын

Thank you Teddy! We are well! Hope yours are well! 🙏

@Pimptorious69 3 жыл бұрын

Hello Ryan. Another great vid!

@anthony1636 3 жыл бұрын

Whenever I renew the oil and filter. I always Arm the engine stop, and then spin the engine over on the starter to circulate the oil around the engine. That then loads up the oil filters and covers all of the moving parts before starting the Engine. I do not know how effective that is but it sure makes me feel safer.

@cpgone 3 жыл бұрын

sure. Cant hurt

@gregburgess6884 3 жыл бұрын

That was awesome Ryan thank you, I learned a lot👍🚛

@truckingandfixing 3 жыл бұрын

thank you for the comment!

@ampedampson5140 5 ай бұрын

We own 2 EVs but I still like watching these videos lol

@truckingandfixing 5 ай бұрын

Thanks!

@magdalenoybarra2793 Жыл бұрын

Cool vid bro its exactly what I was looking for Thank you so much for the great info. Greetings from Texas.

@truckingandfixing Жыл бұрын

Thank you. 😀

@user-pw1xy9mh1e 2 жыл бұрын

Thank you for expanding

@truckingandfixing 2 жыл бұрын

You are welcome! Glad to do so!

@nunyabuziness8421 2 жыл бұрын

By the looks of that separator cartridges you're getting a lot of oil in your fuel oil seeping past the injector seals. And the best way to grease your fifth wheel is it just open a whole tube and put it on there without the gun

@smokngrass420 Жыл бұрын

Great content!, thank you bro.

@davidrains2910 3 жыл бұрын

Learned alot thankyou

@felipemurrieta4984 2 жыл бұрын

Hello friend, thank you for sharing, you are awesome very knowledgeable LOL HAPPY 4HT!!!🌅🌅🌅

@truckingandfixing 2 жыл бұрын

Thank you! Happy Independence Day!

@jabronsparks7284 3 жыл бұрын

Thanks for the great video

@teddyrivas1082 3 жыл бұрын

I really loke the way uou show T - Bear is my handle!

@simpilism3613 2 жыл бұрын

Hi Ryan I know im over a year late but you mentioned about oil filling part and how its at a bad angle and awkward to fill it. That Yellow part is a separate funnel tube and you can actually pull it up and use it as a funnel that gives an extra 6-7 inches. Not sure if you already knew that but it helps me when i have to fill it with some oil. You just have to punch it and it comes up. Great video! thanks

@lubsey 2 жыл бұрын

Great video. Very helpful.

@truckingandfixing 2 жыл бұрын

Thank you!

@joshuadavis6221 2 жыл бұрын

This video was very helpful. Thanks

@truckingandfixing 2 жыл бұрын

Thank you! 😀

@omarfarooqhotak7841 2 жыл бұрын

awesome vid man, thanks!

@truckingandfixing 2 жыл бұрын

Thank you!

@theresadavis9962 Ай бұрын

Great!

@6582rg Жыл бұрын

Ryan-I'll bet you're a lot happier with your new shop compared to back when you made this video.

@tonymorelli1571 2 жыл бұрын

Good job!

@sukhrajsangha3736 Жыл бұрын

for the secondary fuel filter you can cycle the key on and off to prime the filter. this only applies to Cummins engine I believe

@atye04 2 жыл бұрын

Nice carhartt 👍

@elsalvador007 2 жыл бұрын

Very good video. Thanks

@truckingandfixing 2 жыл бұрын

You are welcome!

@terrancetilghman863 11 ай бұрын

Thanks

@AlexK-bh8mc 3 жыл бұрын

Cummins has electric fuel pump. After changing fuel filters you need to turn ignition 4-5 times and then start the engine.

@nomadicyak2462 Жыл бұрын

Wonderful than k you

@truckingandfixing Жыл бұрын

You are welcome!

@graceypatrick Жыл бұрын

You should use shell rotella oil

@williampickett3938 2 жыл бұрын

Good job thanks for sharing

@truckingandfixing 2 жыл бұрын

Thank you!

@gabrielzazueta2218 2 жыл бұрын

Awesome videos!!! Keep up the good work! What kind of boots are those?

@strangeleek1 2 жыл бұрын

The yellow piece in the filler neck is an insert and can be easily removed during filling.

@harri379 2 жыл бұрын

or used as a funnel right

@ertrucker3951 3 жыл бұрын

U the best 👌

@truckingandfixing 3 жыл бұрын

Thank you

@nashaecreary3892 2 жыл бұрын

Excellent content

@truckingandfixing 2 жыл бұрын

Thanks 🙏 thanks

@majaviseibiunouva 3 жыл бұрын

Thanks... I share your video with my father... he said that you’re doing very well every step... thank you again 🙏👍👌👏👏👏

@truckingandfixing 3 жыл бұрын

Thank you!

@ghostbuilder3187 2 жыл бұрын

Should grease steering gear by hand. You can blow out a seal if done with air or cordless impact. 5-8 pumps is fine.

@yeskhan7445 2 жыл бұрын

Good 👍🏼 thanks

@truckingandfixing 2 жыл бұрын

You are welcome!

@Alex-ri7xr 2 ай бұрын

You can pull that yellow funnel thing out of there to pour the oil in more easy.

@bighossirv868 Жыл бұрын

im the happiest when I dont get oil on my hands pulling the oil plug :D its the little things....

@teddyrivas1082 2 жыл бұрын

Always a pleasure to watch you at working on semi trucks! Hope to apply all of your teachings , by the way is this the same as working on Buses. That I would like to convert into a mobile home?

@truckingandfixing 2 жыл бұрын

A lot of knowledges and practices can be transferred to other vehicles. Good luck!

@eaglesview1946 3 жыл бұрын

I always punch a hole in the oil filter and let it drain before I remove it. But first turn off about a half turn while the engine is warm.

@truckingandfixing 3 жыл бұрын

Thanks for sharing.

@atye04 2 жыл бұрын

The bov er air governer is under passenger wheel well in freightliner... its pretty much not prone to freezing from ice or road sludge or anything like that

@dawitabate9291 3 жыл бұрын

Good job brother 🙏🙏🙏🙏🙏🙏

@truckingandfixing 3 жыл бұрын

Thank you!

@simp33333jjjj 2 жыл бұрын

Baldwin filters are pretty decently priced

@victorpellot9520 2 жыл бұрын

Ryan do you have a part number for the tool you used to take off the primary fuel filter? Appreciate your videos thanks

@teddyrivas1082 3 жыл бұрын

How much oil should you have in the drives in order for them to be at right level?

@dedrakuhn6103 2 жыл бұрын

Kenworth sells TRP parts. That acronym stands for= Totally Rejected Parts. The motto is "TRP Totally Rejected Parts "Strong enough for a Freightliner, but pH balanced for a Kenworth." ( The motto comes from (SURE Deodorant®)

@truckingandfixing 2 жыл бұрын

👍

@bigtickettv5845 7 ай бұрын

If you’re going to replace the filter it’s not a problem to puncture a hole in the bottom of filter to drain before removing.

@AlexK-bh8mc 3 жыл бұрын

Cummins has two oil plugs. Did you miss it? Second sump has about a half gallon of dirty oil. By every oil change I have to watch is it drained. The Kenworth in my town refusing to drain from this sump. Now I'm always changing oil by Petro but need to watch "Do Not Forget". To do it by my self it is a huge mess and bring drop off old oil to recycling waste.

@thereckchanic4709 3 жыл бұрын

That's true I never knew it until I started getting this pm done at the T/A, Petro. Heck the mechanic didn't mind a little company while he worked so I was learning all that.

@timj4742 Жыл бұрын

2006 780 D12 Volvo

@hihiker13 3 жыл бұрын

Sapp Brothers is good place to oil change

@matt6640 2 жыл бұрын

Mine came with an o ring but didn’t have one on the old one when I took it off. Do I need to use it?

@Edandpuppy Жыл бұрын

That's what the filters are for , magnetic plug . Duha

@warrenwoodard2855 2 жыл бұрын

Lol shop supplies oh yeah I've heard that one....

@jvjoe4376 2 жыл бұрын

I have seen guys punch holes into the bottom of oil filters. Do you think is a ggod item?

@cesarrobledo7207 2 жыл бұрын

Hey Ryan big fan here! Question how big are those channel locks and do you remember where you purchased them?

@truckingandfixing 2 жыл бұрын

They are 24”, I got them from a snap-on truck, they are blue point brand from snap-on.

@MAAN_TV41 2 жыл бұрын

Thanks Brother👍

@RicardoGonzalez-ii3nx 2 жыл бұрын

what truck is it a kenworth with what type of engine and thanks man good video

@leonardstreets2685 9 ай бұрын

Did you work at the Youngstown cat or canton or up in Broadview heights

@jimmyfumbanks6081 3 ай бұрын

What did he do with the oil . Parts stores will take it but its got to be where they can pour it out.

@9mccloud 2 жыл бұрын

Do have any information on air intake?

@colossus5752 Жыл бұрын

👍

@dfsaghfbg 3 жыл бұрын

Hey Ryan I am thinking about buy that type of truck any suggestions on those Cummings engines

@truckingandfixing 3 жыл бұрын

CM2350 or later is good.

@teddyrivas1082 Жыл бұрын

Hey Rayan how u doing! Hope all is well with u!