ROADTEC RX900 EATING ASPHALT // Roadtec RX900 Planer

ROADTEC RX900 EATING ASPHALT // Roadtec RX900 Planer - Asphalt Milling Machine

Рет қаралды 40,304

3 жыл бұрын

Interested in Diesel and Iron Merchandise? Check out our website!
dieselandironproductions.com/
Subscribe for new videos, updated weekly:
kzfaq.info?sub_c...
Follow me:
Facebook: / dieselniron
Instagram: / dieselniron
The drone I use: kit.co/DieselandIron/diesel-i...
Anyone else collect diecast models? I have a shelf filling up with them in my office: kit.co/DieselandIron/heavy-eq...

Пікірлер: 51

@peterjszerszen 2 жыл бұрын

Whitmore Lake Road reconstruction at I-96. Nice! I think there was PCC under that too.

@DieselandIron 2 жыл бұрын

I believe you are correct on that.

@juniafrank8724 3 жыл бұрын

Brian 😎 with another Great video asphalt millings that's the Best material for a driveway right there 👍 Thank U Brian for the Great video 👍

@DieselandIron 3 жыл бұрын

Thanks Junia! I agree with the driveway comment. My current driveway is asphalt millings I put down 4 years ago

@wandaj.guzman9874 2 жыл бұрын

The Beast Milling Machine Roadtech 900 very rare

@napoleonbonaparte3612 Жыл бұрын

One of the best videos 🎉🎉🎉🎉

@Sl20 11 ай бұрын

I agree 🤫🔴🫢

@DieselandIron 11 ай бұрын

Thanks for watching! This was my first promotional video.

@Sl20 11 ай бұрын

@@DieselandIron doing awesome !!!,🫢keep up the good work !!!!🤫🔴🫢

@ConstructionMachineryChannel 3 жыл бұрын

Awesome machine! Nice find Bryan. I hope to find a few of these this summer too.

@DieselandIron 3 жыл бұрын

Tasks Allen! These are super impressive machines to be around. You feel the sound in your chest.

@RealityisaComedy 3 жыл бұрын

Always great videos Bryan!!

@DieselandIron 3 жыл бұрын

Thank you! This was one of my old customers that I stumbled across working in the area.

@brianrigsby7900 Жыл бұрын

Funny how that giant machine has a roadrunner horn😂

@DieselandIron 11 ай бұрын

Meep, meep! 😂

@jacksonalonzo4903 3 жыл бұрын

Those punisher stickers on the back are badass

@DieselandIron 3 жыл бұрын

I thought so too! They really fit the machine.

@braydentilley4036 3 жыл бұрын

That’s a cool machine! I’ve never seen one that big... around our area they seem to use a smaller version 🤷🏼‍♂️ I also thought the punisher stickers on the back were pretty cool for that type of machine 😂 great video as always man!

@DieselandIron 3 жыл бұрын

These are badass machines. This one packs over 900 horsepower and can mill 14 inches deep in one pass. I totally agree, The Punisher stickers are awesome on these machines. Thanks for watching Brayden

@braydentilley4036 3 жыл бұрын

@@DieselandIron geez. 900 horsies 🤣😳

@DieselandIron 3 жыл бұрын

@@braydentilley4036 oh ya, these mills are absolute beasts. They have belts that are made of Kevlar that are over a foot wide driving that drum

@braydentilley4036 3 жыл бұрын

@@DieselandIron holy smokes! This is one thing I absolutely love about your channel... you’re always so communicative and always are willing to have a conversation with each of us who comment! It’s weird but I feel like I know you and that I’ve met you just because you talk to each of us, this is how channels should be!

@DieselandIron 3 жыл бұрын

@@braydentilley4036 thanks Brayden! I try to keep up with everyone! One of these days we will cross paths at conexpo or something and I'll be sure to shake your hand in person my man.

@Thevacomaticvacuumcorner Жыл бұрын

talk about a close shave on the road this mill sure packs a punch

@littlefinkle7757 3 жыл бұрын

Good video! 👊

@DieselandIron 3 жыл бұрын

Thanks man!

@stevelawton818 2 жыл бұрын

Michigan roads in need of repair big time

@DieselandIron 2 жыл бұрын

Amen brother!

@thehoofersclub 11 ай бұрын

Bad ass fawking job!

@DieselandIron 10 ай бұрын

This was an awesome machine to watch!

@Tzartle_The_Kaiju 2 жыл бұрын

I only see Wirtgen road millers used in my area (silver spring Maryland)

@DieselandIron 2 жыл бұрын

We have a lot of those and a lot of Roadtec's here in Michigan.

@byrond7105 Жыл бұрын

Thats because wirtgen are wayyy better machines than roadtec 😂😂😂😂(seriously)

@mrtowmonster 3 жыл бұрын

The people I hire out to do this type of work this is what we call demolition milling taking it all the way to stone I know everyone works differently but we normally have a grond person on each side keeping an eye on things why do you ask if you watch the side plate on the unmanned side in the start its going under the old asphalt and ripping it up this is how stuff gets tore up and if you watch the front tracks they are slipping usually the rear mold board is digging in the back and has too much down presure and neeeds to be raised up a bit and i see they have a tow bar hooked up to the water truck s they don't have to stop to refill with water this is different and like I said everyone works differently but that puts alot of extra weight the machine is pulling when milling I'd think it puts alot of extra wear on the final drives especially pulling hills and going down a grade but like I said everyone does things their own way

@DieselandIron 3 жыл бұрын

Most of these crews will run two ground guys but when they are spread thin they will only have one ground man. Normally they only do it on jobs like this where the operator can see one side of the cut.

@dylan-hv1vu Жыл бұрын

For water trucks we used tow straps that were hooked up to the back of the machine. Operator stops to send a truck, where truck pulls up, hooks up tow strap, hose, and fire up the pump. Then when it's full you unhook, and send the water truck driver to fill up.

@McHighler 3 жыл бұрын

That was kinda cool

@DieselandIron 3 жыл бұрын

These machines are incredibly impressive. They can mill 14 inches of asphalt in one pass and this particular machine has over 900hp.

@dimsumlee1115 3 жыл бұрын

I find their horn system odd. Ours was 1 stop, 2 forward, 3 reverse, 4 reposition.

@DieselandIron 3 жыл бұрын

Like everything else in this industry, it depends on the job, the operator and the situation. I've seen all sorts of different honk techniques used. Thanks for watching!

@dimsumlee1115 3 жыл бұрын

I agree. That one was my favourite in the cut loading wiggles with a JD470. I rarely needed to clog the radio with explanations. It was nearly seemless.

@gtpmike2000 3 жыл бұрын

What an awesome machine. Love to see those with a 12 footer on it

@DieselandIron 3 жыл бұрын

I'll have to see if anyone has a 12 footer in the area. Thanks for watching!

@Sl20 11 ай бұрын

Love it great job!!,🤫🔴🫢

@Sl20 11 ай бұрын

Love it !!!,🤫🔴🫢

@DieselandIron 11 ай бұрын

Thanks for watching!

@AnacesardaLuz26daLuz77 Жыл бұрын

Cesar🧔🏻

@tracemanning7088 2 жыл бұрын

Why have 900 HP and not use it. Lean into it!

@DieselandIron 2 жыл бұрын

This is definitely an industry that requires mental toughness as much as physical toughness. Long hours and getting yelled at take a toll on your mind. You have to be able to push through because tomorrow will be better.