DIY venturi, a few easy builds for aquaponics, aquaculture or hydroponics..

Рет қаралды 1,267,613

Rob Bob's Aquaponics & Backyard Farm

10 жыл бұрын

I really like the idea of aerating the fish tank by venturi to save some coin & help make the system quieter.. A mate shared an idea with me for a unit he had been working on & was happy with.. I decided to have a crack at his idea along with a few others to see which I thought would work the best for our set up.. I was most pleased with the results & ended up going with the "Bear Unit".. I have had one in the aquaponic fish tank for over 2 weeks now with no issues & have plans to add another to a moving bed bio filter that will be added to the system soon..
Was also very pleased with the off the shelf unit. That one will be going into the moving bed bio filter in the recirculating aquaculture system & is also being used in the fish tanks on the new aquaponics system.
The black "off the shelf" venturi used in this clip is now available through our "Blog Store". All ordering information is on the link below.
www.bitsouttheback.net/p/bits-...
Below are a couple of pages I found helpful when looking into venturis,
• Fluid Dynamics VII: Th...
en.wikipedia.org/wiki/Venturi_...
leisure.prior-it.co.uk/venturi...
Below is an explanation of "Fine bubble aeration" along with some useful links/references,
en.wikipedia.org/wiki/Water_ae...
Subscribe Here► goo.gl/vCXkP5
Would be great to see you come along & say "G'Day" when we post a clip.
Our Bits Out the Back Aquaponic & Garden store & affiliate link page
► bitsouttheback.com/store/
My Amazon Influencer page where you'll find gear I use around the patch & Aquaponics listed
► www.amazon.com/shop/bnbob01
You can help support our channel through
FARM YOUR OWN YARD Supporters site,
► farmyourownyard.podia.com/
"Farm You Own Yard" is a dedicated Supporters/Members site where I host my exclusive, supporters only content for folks that would like to support the channel.
One-off contributions can be made to PayPal
► www.paypal.me/RobertGrayAU
Thanks to all our Patreon Patrons for your ongoing support & friendship.
A HUGE THANKS needs to go out tho these Super patrons for supporting our channel
Rick Campbell from PineSeed Computer Repair - Data Recovery
pineseed.com.au - Computer Repair and Data Recovery
Servicing the Toowoomba Area (Queensland Australia)
Ben from Ben's Chicken Stampede at Winton (Queensland Australia)
Ben runs Chicken Races raising money for charity, and has an aquaponics farm too!
You can check out Ben's Facebook page here
goo.gl/v4myAA
Tina from BS Ranch
goo.gl/x0O4SZ
A homestead raising, ducks, chickens, goats + more in Oak Harbor, Washington while working on Masters of Plant Health Management with Ohio State University Grad School.
Steve McAlister
Not Bar Farm, LLC from Northeast Georgia USA
goo.gl/S7X4ww
Low input, small scale, local farming
MRWS Instruments - Cigar Box Guitar Emporium
Specialising in parts and accessories for handmade instruments.
CBG • BASS • GUITAR
www.mrwsinstruments.com/
Sillybugger
Aqua Gardening Brisbane Australia.
Shop Online or Learn about Hydroponics and Aquaponics. Worldwide Shipping!
bit.ly/AquaGardeningSite
(Affiliate link)
Bluestone Aquaponics
"Bluestone Aquaponics The foundation of today's food".
/ bluestoneaquaponics
Root & Ramble Tee Shirts I wear in many clips are available here ► rootnramble.com/
I don't get anything for this, just like the shirts 😉 🙂
Follow us on
Facebook ► / bitsouttheback
Instagram ► bits_out_the_back
Tumblr ► / bitsouttheback
Twitter ► @RobsUrbanFarm
Pintrest ► / bitsouttheback
Rob (That’s me 😉) is a participant in the Amazon Services LLC Influencer/Associates Program, an influencer/affiliate advertising program designed to provide means for sites to earn advertising fees by advertising and linking to www.amazon.com/shop/bnbob01
#Aquaponics #AquaponicSystem #AquaponicGrowing

Пікірлер: 747

@RobsAquaponics 2 жыл бұрын

Want to learn more about Aquaponics? 🐟 🍓🥬🍅 Now you can with Rob's "Backyard Aquaponics for Beginners" Guide for only $9.95. You can see the guide in action on my website, ► www.bitsouttheback.com/aquaponics-guide Or, buy directly here, ► robbobaquaponics.retrieve.com/g/XL0J6T2P#/content/90525 Don't forget to hit that subscribe button if you want to be notified when new videos are posted to our channel. Cheers all & happy growing. 🐟 🍓 🌱

@tuvoca825 4 жыл бұрын

Nice. Only people who understand what they are looking at would appreciate all the nuances. Thank you!

@RobsAquaponics 3 жыл бұрын

You are welcome & have a top one.

@DannerJade 9 жыл бұрын

I really like your videos. They are the right mix of technical and conversational, and have kept me up many a nights figuring out how I want to expand my little backyard system! Thanks so much!

@birddogone9716 7 жыл бұрын

Thank you for this video and all the others. I just started building my system and watching your videos saves me a lot of mistakes. Hopefully my system will start and be better thanks to you.

@RobsAquaponics 7 жыл бұрын

Thanks for watching folks & don't forget to click the subscribe button if you enjoyed the video. 🐟🐟 Share the clip around with family & friends if you think they'll enjoy it too. 👍 Cheers all & have a top one. 😊

@samuelkropp5363 6 жыл бұрын

Rob, Will you take a look at my aquaponic video (36 seconds) and let me know what you think of my new system? best, Sam

@nicholaswilliams2312 7 жыл бұрын

Thank you Rob for kindly sharing your knowledge on venturi. An added bonus I came across is if your sump tank Pump is stopped the venturi will prevent water from syphoning back through the pump saving the use of one-way valves. Nick.

@RobsAquaponics 6 жыл бұрын

Hope it helps you out some Nick & sorry for taking a while to rep[ly. 👍 Cheers mate.

@peterm2154 6 жыл бұрын

Great diy video, i'll try this in my pond and bio filter. Like what you do, keep it up

@czar89031 7 жыл бұрын

I love the idea of this Venturri aerator,.. thanks for sharing your magnificent creation, from USA & THAILAND

@RobsAquaponics 6 жыл бұрын

No Problem Cesar. Cheers.

@patmencke1906 10 жыл бұрын

Thank you. I haven't heard anything about venturi here in the States. Love the sound of just the bubbles. You do good things and I appreciate it.

@RobsAquaponics 10 жыл бұрын

Hi Pat... There are a few different styles you can pick up from Ebay fairly cheaply.. They are normally used in spar baths or for liquid injection of fertiliser into irrigation lines the garden.. I like the home made units over them as I get to tinker around ;) Cheers & have a great one, Rob..

@GnnVinh 6 жыл бұрын

Rob, Thanks for this video. Great insight!!!

@deomacrazio 10 жыл бұрын

Wow, i've never thought about that! it's an amazing way to provide oxygen. i'm planning to do an aquaponics system as soon as i can. i find your videos very useful. thanks a lot!

@oscar86456 10 жыл бұрын

Rob...this video is really awesome! you answer all my questions through your very detailed, i surely do this to my backyard. thanks a lot once again.

@RobsAquaponics 10 жыл бұрын

Hope it works out well for you :) Cheers & have a great one, Rob..

@Kyee71 10 жыл бұрын

Another outstanding Idea !!!, thanks for taking the time to share what you're doing with your aquaponics setups, I'll defiantly be using this idea on my setup.

@RobsAquaponics 10 жыл бұрын

Hope it gave you a few useful ideas.. Cheers & have a great one..

@RobsAquaponics 10 жыл бұрын

Hi Russel Workman.. The water in our system is so clear due to the Radial flow filters as well as the media beds removing the bulk of the solids.. We still get solids in the fish tank from time to time that we remove with a little push on vacuum attachment that fits onto the solids lifting outlet that works really well.. Aquaponic solids vacuum attachment for fish tank.. The solids get collected in the radial flow filter where he can be removed later.. Don't really have any collect in the sump tank at the moment.. I probably vacuum it out about once every 6-8 weeks during summer as the SLO picks up the majority.. Hope that helps some..

@charlesobrien3871 10 жыл бұрын

Put a spray bar at the surface making bubbles and that will give you plenty of oxygenation . That's how I set my aquaponic system up. Works great for me. So far everything we have put in there is growing good. Thanks for all the good info you share with us. Charlie...

@ernieyribe8767 7 жыл бұрын

Thank you Rob. I'll be using a venturi for my small fish system. Thank you again for all your great videos!!! Ernie from Temecula, Califorinia USA.

@RobsAquaponics 7 жыл бұрын

+Ernie Yribe Hi Ernie. Am glad the clips have given you a few useful ideas. Hope the season has started off well for you over there. Rob

@wettexan 2 жыл бұрын

Cheers Mate!! Rob, you are a beautiful break from the day-to-day depression/horrors of the news of the day instilling hope for the future. I'm grateful to be in a position that I may have a chance to put your ideas into practice here in central TX. The future can only tell. Wishing you and B all the best, sir.

@RobsAquaponics 2 жыл бұрын

Hi Eric & thanks mate. Hope the build goes smoothly if you have a crack at it. 👍 Cheers & all the best to you & yours.

@tim49013 6 жыл бұрын

I love this video I have something similar that I got from the autopot festival last year but the one I have has an air filter that you can change once a year

@RobsAquaponics 10 жыл бұрын

Hope it gives you a few ideas & enjoy the build.. One of the best parts is planing & constructing the system I think.. Cheers, Rob..

@n2kois 10 жыл бұрын

You Rock Rob!!! Wonderful ideas.... Thanks for sharing!

@RobsAquaponics 10 жыл бұрын

Cheers n2kois :) Have a good one..

@jetsixsix 9 жыл бұрын

Great info, thanks for making this video. I needed a quick and cheap solution to start adding air to my pond, as it's been hot and dry here in Florida, at least for this time of the year. Coupled with it being too still, it was starting to stagnate and I didn't want to end up with a fish kill if I waited too long. The pond's main purpose is as a sort of fire hydrant, since there is no municipal water services where we are, but we enjoy the snakes, fish, frogs, and turtles that call it home as well. The ideas in the video helped get the job done, for now. I've got an artesian well that's used for keeping the pond filled, so I just added a venturi in to the line. I experimented with putting it at the start, middle, and end of the line, and having it by the valve works well while avoiding the problems with locating it elsewhere. (Debris, pond height, etc.) I did find that by extending the length of the air line coming in, it actually suppressed the sucking sound quite a bit. That extra length also allowed me to orient the opening towards the ground, protecting it from being bumped and keeping the opening from having stuff fall or blow in to it. It's not the ideal solution for my application, but I think it will help out until I can bury electric service out to it and buy a proper aerator for a pond this size. Again, your video was very helpful, thanks for taking the time to make it. Simple Venturi For Pond Aeration

@RobsAquaponics 9 жыл бұрын

Nice one mate.. Thanks for the clip.. Looks like you're getting a load of air into the water & am glad it's worked out for you.. Are those solar pumps any good for aeration purposes ? Cheers & all the best..

@gedepandenarendra1011 7 жыл бұрын

Thank's a lot, Bob... Very inspiring & practical... Greetings from Bali

@RobsAquaponics 7 жыл бұрын

Thanks :) Hope your build is going well. Rob.

@atrohadff 9 жыл бұрын

Great video. I have been looking for an easy way to spray fertilizer in my garden. This system will definitely work to suck up the fertilizer, mix it and spray it. Thank you for sharing.

@RobsAquaponics 8 жыл бұрын

atrohad Hi there. Would love to know which one you used & how it went mate. Cheers.

@1943L 7 жыл бұрын

Nice simple options, thanks.If a really efficient Venturi is required it does need a taper inside the water feed tube that has two angles. The air intake enters at the low pressure point.

@brucescallan 10 жыл бұрын

Thank you very much for sharing your knowledge, its a awesome help which assists me in my trial and error era. Bruce South Africa

@RobsAquaponics 10 жыл бұрын

Hi there Bruce.. Glad the clips are giving you a few ideas.. Have fun with the build, Rob..

@anielaszymanska9592 8 жыл бұрын

I love your fantastic ideas which lovely to follow Good luck in the future All the best

@RobsAquaponics 8 жыл бұрын

+Aniela Szymanska thanks Aniela. All the best to you as well :-)

@SSLFamilyDad 10 жыл бұрын

Excellent ideas and thank you for doing the comparisons. I am thinking about adding one to me new aquaponics setup and getting rid of the air pump, one less energy sucker.

@RobsAquaponics 10 жыл бұрын

That's why I was looking at them as well.. Make more sense to run one unit to do both jobs.. Did buy a new 4200lph air pump as a back up for the 2 systems.. Doesn't hurt to have some extra air for the warmer months here I think.. Cheers & have a great week.. Rob.

@dragonflysdiscoveries7567 8 жыл бұрын

Howzeet Rob, What a great video mate, simple and very clear. And fantastic links too. Thanks for sharing mate.

@RobsAquaponics 8 жыл бұрын

+Duncan Bell Cheers Duncan 👍

@MrAce0r 7 жыл бұрын

Never knew about this, thanks I will definately try this first model you showed out ! :) Hugs from Denmark

@RobsAquaponics 7 жыл бұрын

Hope it works out well for you. Cheers.

@stevegodley8744 6 жыл бұрын

Hi Rob. Greetings from the West Coast of Canada! Just thought I would pass along to everyone something that I learned at a seminar on aquaculture. If you're ever wondering if there's enough dissolved oxygen for your fish, just watch and see if they spend most of their time hanging about at the the bottom of the tank. If they do, then you have enough oxygen, as there will always be higher concentrations of O2 near the surface, due of course to the fact that gases are lighter than water and tend to get pushed up. This is why fish will gasp at the surface if they are short of oxygen. I thought it was a very useful tip when I heard it, and thought I'd pass it on. Love the vids and your delivery. Keep "em comin'!

@RobsAquaponics 6 жыл бұрын

Cheers Steve. Have a top one.

@ranchoarmonia 10 жыл бұрын

thank you very much for the teaching aquaponics Javier greetings from Uruguay

@RobsAquaponics 10 жыл бұрын

Hi there... Just showing how things have gone for us here with our backyard system.. Hope to do some formal studies on aquaponics in the future once my home duties are done here.. Cheers Javier, Rob.

@MyMcDizzle 10 жыл бұрын

Great video. I will be adding these to my system this weekend.

@RobsAquaponics 10 жыл бұрын

Hope they go well for you Mad Mike... They are a real easy & cheap build.. Cheers & have a great one..

@melodylyons4956 10 жыл бұрын

Hundred thumbs up Bud! Now that's what I was talking about! You got it going on. Beauty!

@thomaspaxton5041 9 жыл бұрын

very solid and practical design. thank you SO much for sharing this priceless information.

@RobsAquaponics 9 жыл бұрын

Thomas Paxton Hope it helps you out some Thomas. Cheers mate.

@thomaspaxton5041 8 жыл бұрын

RobBobs Backyard Farming i have a question. i tried, basically, this exact set up but where im supposed to be drawing air in, its spitting water out.... what am i doing wrong?

@RobsAquaponics 8 жыл бұрын

+Thomas Paxton Hi Thomas. Sorry for the slow reply. Have you sorted out the unit yet mate ?

@squnktalk 10 жыл бұрын

Great! Thanks for sharing your experience, much appreciated.

@RobsAquaponics 10 жыл бұрын

No problem.. Have a good one Ryan, Rob..

@RobsAquaponics 10 жыл бұрын

+Sarah Davis.. On the final build there will be double 45° angle fittings made up like we use on the aquaponics set up :) Spent some of yesterday gluing up the 50mm/2" jobbies for the fish farm & aquaponic refit.. Cheers & have a great one Sarah..

@RobsAquaponics 9 жыл бұрын

Frankie Bishop Please don't spam my clips trying to make sales. You're not the first & won't be the last but I don't appreciate it at all. Get original, create something useful & offer it for free to help others rather than trying to sell via "click bait". From what I've been told it's not worth the money charged for it when there is so much free information available on the Internet.

@AndrewMcLaughlinAM 10 жыл бұрын

Awesome technique for getting more air in the fish tank without the annoying water pump buzz! #aquaponics #aeration

@matthickey209 7 жыл бұрын

this was a very good idea inspire me now some day I'll make my own

@RobsAquaponics 6 жыл бұрын

Hope it works well for you Matt. Cheers.

@deaffatalbruno 10 жыл бұрын

I used similar constructions in fish tanks. If u get larger bubbles, it helps to run the outlet of the pipe against the wall of the tank. If you have some decent pressure then the large bubbles will hit the wall of the tanks and burst in small bubbles. Worked really well in my fish tanks!

@RobsAquaponics 10 жыл бұрын

Hi there & thanks for that.. Ended up running with a few I was given in the aquaculture build but think the home made jobbies will get a run somewhere in the new system soon.. Cheers, Rob..

@RobsAquaponics 10 жыл бұрын

Here in the subtropics we have a very mild winter with the temps only dropping below freezing for a few hours at a time on a handful of days every winter.. Our block hasn't had a frost on it in the 12 years we have been here.. I had the system running all winter & was feeding the perch most days... If we were in a cooler area down south we would probably just run trout during the cooler times.. Cheers & have a great one, Rob.

@jpollard117 9 жыл бұрын

Rob Bob: Since you were curious about other people's take on the venturi I will give it a go. The first place I ever used a venturi was in science lab. The faucet was designed to shoot out a jet of aerated water and the venturi air intake was our vacuum line. Later I noticed a dozen venturi on my hot tub. Same design, the fast jet of water causes low pressure and thus air is sucked in (velocity and pressure in a tube math). In a practical application high pressure occurs at points of dilation in a tube. Aneurysm in a blood vessel or a bubble in your garden hose. Low pressure at the constricted points where velocity is increased. MY POINT - buy your venturi from the spa store or online spa depot or whatever, they are the spa or hot tub jets. My contribution for your wonderful videos. Thank you again, from USA.

@RobsAquaponics 9 жыл бұрын

Thanks for that Tanner.. Have had a few folks recommend the spa units but haven't played with one as of yet though.. Cheers & have a great one, Rob..

@anthonymitchell2248 2 жыл бұрын

That's brilliant Rob!

@budbert69 10 жыл бұрын

Thanks Rob your videos are allways informative

@murrayjefferys 9 жыл бұрын

Loving you work Rob I made a failsafe on mine -Simply run a pipe over back to the tank

@Martin-pb7ts 10 жыл бұрын

Hi Rob, thank you very much for this video. A forum member (from Murray's forum) directed me here when I said that the venturi was the one thing in AP that I didn't really "get". Well now I do thanks to this video. Regards, Martin.

@RobsAquaponics 10 жыл бұрын

Hi Martin.. Glad the clip helped out.. Are you setting up a new system? Cheers mate & have a great one :)

@Martin-pb7ts 10 жыл бұрын

Rob Bob Hi Rob, not currently setting up a system as trying to emigrate to your part of the world. So kind of in limbo but definitely learning all I can to be able to set one up when the time is right. Regards, Martin.

@philipkindleysides3471 Жыл бұрын

The idea you shared works perfectly. Don't buy one when you can make your own for under $5 AUD. Thanks Rob :)

@1pathseeker 10 жыл бұрын

Hi Rob, from what I've read the size of the bubbles really makes on difference as their not in the water long enough to make a difference. It's the bubbles breaking the surface tension that does the oxygenation but like most things their are as many schools of thought as ways to do things. Thanks for the video mate.

@jmajick4415 Жыл бұрын

It's one of those things that works but most everyone is wrong about why it works. A powerhead in the tank may be a better option than injecting dirty air into your water at high speeds

@RetiredandLivingthedream 5 жыл бұрын

Love your video's i'm starting a Hydroponic 1st then move up to your idea's keep the videos up thanks.

@RobsAquaponics 5 жыл бұрын

Glad you've been enjoying them mate. Cheers & have fun with the build.

@rastlach 10 жыл бұрын

you could put a fly screen over the end of the outlet to further break up the air bubbles at the end. From what it looked like your first home made one was the best one that I'll be using. Cheers

@Rockmachine99 8 жыл бұрын

I have a video up with one in my flood bed...all thanks to you sir.

@RobsAquaponics 8 жыл бұрын

+Clinton W Nice job Clinton. Like how you can see the bubbles through the hose. Cheers mate & hope you get a nice yield :-)

@JamesKing2understandinglife 10 жыл бұрын

Wonderful simple Venturi! Thanks.

@RobsAquaponics 10 жыл бұрын

Works well for a DIY jobbie.. Cheers James & have a good one..

@jokervienna6433 3 жыл бұрын

This is very smart. I used to have a basement full of aquariums, breeding aquarium fish half professionally. I experimented with venturi-solutions there and getting rid of some air pumps was great. The only thing I have to add is that if you use soft elbows (not the 90 degree variant), you will optimize water flow. The water will then be able to "screw" itself through the bend and you will not loose as much pump capacity.

@RobsAquaponics 2 жыл бұрын

Thanks JV. have a top one.

@natureboy9113 9 жыл бұрын

Rob, Thanks for this video. Great insight

@RobsAquaponics 9 жыл бұрын

Hope it helps.. Cheers..

@DsmB2007 10 жыл бұрын

Rob..Your videos have been an inspiration for me. I hope to have my own Aquaponics system in the coming year. I've got 3-4 big projects for my family compound and Aquaponics is one of them! All the best in 2014..Happy New Year..and thank you!

@RobsAquaponics 10 жыл бұрын

Sounds great Daniel & hope you have fun with the build.. For me it's the best part so am looking forward to tinkering with ours soon.. Cheers & all the best to you & yours for 2014, Rob.

@jdwilsun 3 жыл бұрын

I airated 12,000 fish with a submersed water pump which carried water horizontally to fall back in the pond. I put a Y fitting backwards in that line so it sucked in air. It helps if there is at least a meter of horizontal pipe after the Y to allow the air & water to mix before falling back into the pond. So simple.

@RobsAquaponics 2 жыл бұрын

👍 Nice one.

@eugeniussr 10 жыл бұрын

Love your vids! Learning a lot. Planning on doing some tilapia/herb aquaponics this year :)

@RobsAquaponics 10 жыл бұрын

Great to hear... Have you checked out the aquaponic forums as well? There are some great DIY backyard focused ones like "Backyard Aquaponics" that I have found useful as well as a few based in the States.. Cheers & have fun with the system build :) Rob.

@WayneMeador 10 жыл бұрын

Thanks for the answer Rob, I appreciate it my friend. This helps me to put together in my mind what you are working with etc... I'll say it again, great video! :-)

@Red.Hot.Chili.Beans63 7 жыл бұрын

Put a mesh screen at the end of the outflow, should break up big bubbles

@giantsinister 10 жыл бұрын

wow, i like the device with the clear tube. Just wow....

@RobsAquaponics 10 жыл бұрын

Hi there.. I'm using that unit in the moving bed biofilter in the new build... Found it woks better in that application than any other venturi I've bought or made.. Would be great to get an O2 meter & do a side by side test on some water to see which is best.. Cheers & have a great weekend, Rob.

@ondrobaco 9 жыл бұрын

thanks for the video. I went ahead and made the one elbow venturi version and replaced my air pump in IBC as I had parts in the garage already. It took about 10 minutes to make and it worked great. I found that you can make bubbles smaller and more plentiful when you make several small holes on the vertical pipe that is delivering pumped water with air to the bottom of the IBC.

@RobsAquaponics 9 жыл бұрын

Hey Ondro & thanks for that.. Shall try it on one of the DIY jobbies in the fish farm & compare it against the other tank.. I found the deeper I tried to send the air the less I got so only have a 6-8" pipe in there now.. Cheers Mate & all the best, Rob..

@ondrobaco 9 жыл бұрын

gladly Rob. happy to share my findings. after all i installed the venturi only because of your video :-) . my pipe goes all the way to the bottom which is about 90 cm and the bubbles apart from escaping alongside the vertical pipe get also to the bottom of the pipe. the bubbles are not tiny tiny, but defintely smaller than when there are no holes.

@RobsAquaponics 10 жыл бұрын

Cheers Mr Dale.. Only soaked myself a few times :D Thinking it could be useful in small hydroponic set ups too.. All the best to you both.. Rob..

@DonMallicoat 10 жыл бұрын

I used the 90 version style, but with a T (end with the pen pointed up and capped with a hole drilled in it) and used the bic pen. However I slightly crimped the end into a small slit. This dramatically reduced my bubble size and has been working well in my 450 gallon system for almost 3 months.

@RobsAquaponics 10 жыл бұрын

Nice one Don.. That was the only style I saw around when I first started to look into venturis.. Made one along those line but used the thin aquarium air line instead of the pen in the top of the cap & had no real luck with it so gave away playing with them for a while.. Would really like to play around with a dissolved O2 meter to see how well they really work when it comes to bubble size.. Have added it to my B'Day wish list with the boss but don't like my chances :D Cheers sir & have a great one, Rob.

@hglide82 5 жыл бұрын

I just discovered your channel and love your DIY videos! This one is particularly informative, going to add one to the system I'm making. Best regards!

@RobsAquaponics 5 жыл бұрын

Hope it works well for you. 👍 Cheers & happy growing.

@uprightfossil6673 4 жыл бұрын

Hi Rob. Subscribed already. That water fall into the sump tanks can be made into a super aerator by placing them into a pipe twice its size with a few slots resting on the bottom. The water pressure and splashing pushes the air down to the bottom of the tank through those slots. Peace

@RobsAquaponics 4 жыл бұрын

Have seen folks use something similar in their systems. 👍 Cheers mate.

@benjaminmendoza41 3 жыл бұрын

Thank you for sharing. I recently build a 16000 gallon Koi pond with a 5'X 10' bog filter. I wanted to induce air to the water as it entered the bog. Your DIY will make that happen.

@RobsAquaponics 3 жыл бұрын

Hope the venturi does the trick for you Benjamin.👍

@martysgarden 10 жыл бұрын

Gidday Rob, cool video mate. I am possibly looking at doing some small scale aquaponics soon, so appreciate all the tips, thanks Marty!

@RobsAquaponics 10 жыл бұрын

No problem Marty.. Let me know if you want any info or sites that might help you out.. Cheers mate..

@zachd9433 9 жыл бұрын

Very nice video, will add it to my collection of things going into my next build. Cheers

@RobsAquaponics 9 жыл бұрын

Hope it comes in handy mate.. Cheers..

@zachd9433 9 жыл бұрын

I just started my wood base for my two 50 gal tanks, painted the bottom 6 inches as lately I am getting mold on the wood from the spring thaw. Once I actually start the build I will post pics and ask questions.

@RobsAquaponics 9 жыл бұрын

Zach D No problem.. Can take a while for me to get back to folks as you've seen just to warn you ;-) Have fun with the build..

@zachd9433 9 жыл бұрын

@toddchapman3017 6 жыл бұрын

Hey Rob, just emailed an order to you. I'm setting up a system i picked up second hand with a few modifications. I got 2x 500L growbeds, 2x 1000L fish/sump tank all pipework, clay balls and 3x pumps $800 for the lot. A nice upgrade from my ibc. I'm going to add in a radial flow and bio filter using your videos. Thanks so much Rob.

@RobsAquaponics 6 жыл бұрын

Nice score Todd. 👍👍 Hows the build going or are you leaving it for the Christmas break? Cheers & have a top one.

@deviprasadalapati2184 6 жыл бұрын

Thank you sir for the info. Its helpful.

@RobsAquaponics 10 жыл бұрын

Cheers for that & hope the info is useful for you.. Have a great one, Rob :)

@janisk3527 10 жыл бұрын

would love to see more videos on the back yard pond filters ect that is what I have and need more info on how to get these set up and working thanks Rob

@RobsAquaponics 9 жыл бұрын

Have you seen the clips on the radial flow & bio filters that I've posted Janis? They are all that I have up at the moment but will probably post on others as I start to use them.. Cheers.. Rob..

@RobsAquaponics 10 жыл бұрын

Hey there Michael.. Hope all's been well.. Shaun sent me a link to it the other day & it looks like a great idea.. Cheers sir & have a great one. Rob..

@AgustinEduardo1982 10 жыл бұрын

very good!!!!!!! congratulations bro

@RobsAquaponics 10 жыл бұрын

Cheers mate :) Just seeded it out again but think the girls have smothered all the seeds by scratching soil all over the green shoots.. All the best, Rob..

@traveller563 7 жыл бұрын

Hey Rob! I came across your videos recently and have been enjoying them very much. You've done a good describing the function and construction of all the different components of an aquaponic system. I had an fairly simple idea that may help you decrease your bubble size and increase the oxygen saturation on your venturi system. If you were to add an aeration screen, like the one on a kitchen faucet, on the end of the PVC pipe, it should diffuse the the larger bubbles in the pre-oxygenated water, increasing the oxygen saturation without restricting the rate of flow much, if at all. Just a thought! Mark Stephens - Houston, Texas

@RobsAquaponics 7 жыл бұрын

Hi Mark & thanks mate. One concern I'd have with that is the screen may end up getting clogged with solids. Can see where it would help out in some situations where the solids were all removed. Cheers & all the best Mark.

@JTBear 10 жыл бұрын

Excellent info there ... think I might need to play with that idea a little bit. I love the sound of the water flowing but I hate the sound of my little air compressor in the greenhouse so that might be a solution. Thanks!

@svetoslavivanov7905 7 жыл бұрын

Liked it! Unbelievably helpful video my friend! :) You would not believe what I intend to use this system for - self service car wash, detergent dispensing system for the pressure washer :)

@RobsAquaponics 7 жыл бұрын

😃 That's great to hear Svetoslav 👍😊 Hope it works out well for you mate. Cheers. Rob

@clydeclarke5406 10 жыл бұрын

good day mate, Just watched your video, Man that is way cool, I'm going to try that this spring when I build my aquaponics system. It will save me the price (and noise) of a Air pump. Way to go, Keep up the good work. thanks Clyde in Ark. USA

@RobsAquaponics 10 жыл бұрын

Cheers Clyde.. Hope it comes in handy & enjoy the build.. Should be out there making a new radial flow for ours :/ Have a great one, Rob..

@screech82 10 жыл бұрын

Really nice information. Thanks for this video!

@RobsAquaponics 10 жыл бұрын

Cheers & hope it helps you out some.. Have a great one Jean-Francois, Rob..

@mediamaker2000 10 жыл бұрын

That is very cool Rob! Looks to be very fun to play with. Might have to do a little fabricating for fun now lol I give this video a green thumbs up sir Rob!

@RobsAquaponics 10 жыл бұрын

Thanks.. have a great one, Rob..

@wilsonquindedoumet4959 10 жыл бұрын

DYI Venturi it´s very good.Thanks excelent idea.

@RobsAquaponics 10 жыл бұрын

Hope it gives you a few ideas, Cheers.. Rob..

@wilsonquindedoumet4959 10 жыл бұрын

Yes, I hope to try it in my new project as soon as blue crabs may know. Thank you very much Rob

@RobsAquaponics 10 жыл бұрын

Thought about doing that in the past but decided on air stones then venturi.. I like the idea of the bubbles & flow in the base of the tank stirring the water up more with the venturi.. Have noticed that the solids don't pool in just one area now which I think is a good thing as it means the water is circulating better in there now.. Cheers Charles & glad you like the clips.. All the best, Rob.

@JmacBogan 4 жыл бұрын

love the ingenuity here

@RobsAquaponics 4 жыл бұрын

CC Bear came up with a great design. Cheers 👍

@sissymurphy9620 10 жыл бұрын

I love your video .I have a little over 3000 gallon pond and just rebuilt and think I am going to make one of your venturi .Thank you for the great video .I will be making one .

@RobsAquaponics 10 жыл бұрын

Hey there.. Glad you found the build useful & has given you a few ideas.. Cheers, Rob.

@sissymurphy9620 10 жыл бұрын

well the one i built is working great and tomorrow i will be building another one my koi will sure love this in the summer heat when oxygen levels get low .thank you again

@RobsAquaponics 10 жыл бұрын

sissy murphy That's great to read :) Have a great one :)

@RockCrushing777 10 жыл бұрын

Good work man your system is very great.

@RobsAquaponics 10 жыл бұрын

Cheers mate :) New one is coming along nicely.. Have a great one..

@RobsAquaponics 10 жыл бұрын

Cheers Richard :) Was fun & only slightly drenching top make ;) All the best Sir :)

@jaysonpriest7321 5 жыл бұрын

Cheers for the video, it helped me design my own venturi and finally get rid of my air pump, I've decided not to put mine in my fish tank, I've got mine in my sump, I have had to restrict the flow between my pump and fish tank with a ball valve because my fish tank started overflowing, (my pump may be a little to powerful🤣) I've redirected the water that I've restricted from going into my fish tank back through a venturi and it returns to my sump which adds oxygen to my water. I do have a video on my very new channel (it's the only one so far) if you want to see how it works.

@jasonrtz 10 жыл бұрын

Great stuff Rob. Plan to do some testing down the road myself. I want to try to use a natural venturi to stimulate aeration in a deep water culture system. Also I'd like to see if I could gravity feed it, from a raised bed above.

@gasperooch 10 жыл бұрын

Great video Rob. Thanks buddy.

@uan5cesues 7 жыл бұрын

Interesante video muy bien explicado, el agregar una reducción al flujo nos ahorra una bomba de aire para apoyar la oxigenación del estanque piscícola. saludos Rob

@RobsAquaponics 7 жыл бұрын

Thanks Eder. Did you watch using translated subtitles & if so did they work OK for you? Cheers mate & have a great one.

@jebradleymd 10 жыл бұрын

Another idea would be adding the air intake venturi to the pump intake line, rather than its output. The bubbles would then be broken up by the pump impellers at the beginning of the system, rather than having to route flow back. Or having venturi's in both places.

@RobsAquaponics 10 жыл бұрын

Not sure how that would go but worth playing around with.. Might need to alter the shape of the air intake pipe a bit from the way its set up now so it just doesn't suck too much air.. Will definitely keep it in mind when I get down to play around with it again.. Cheers Jim..

@RobsAquaponics 10 жыл бұрын

Have thought about using some shade cloth as the holes are smaller but I think we are both on the same page ;) Shall be gluing up the final unit for the system this week along with 2 for the RAS as I think it has proven it's worth.. Cheers Ra & have a great one..

@Ebocraze 5 жыл бұрын

Thanks . Extremely educative

@RobsAquaponics 5 жыл бұрын

Cheers. 👍

@RobsAquaponics 10 жыл бұрын

I was told that some do it in the return lines from their grow beds to the sump tank & is something I will be looking into.. Even if it only adds a bit of O2 it's better than nothing I figure.. Cheers Jason & have a great one.. Rob..

@MultiOutdoorman 4 жыл бұрын

Hi Rob. Have you tried capping the bottom of the dip tube that sits down in the tank, then either drilling tiny holes in it (or the pipe itself) to dissipate the air bubbles, or even using some kind of mesh or screen ? 'That's how solar heating air-separators work ( in reverse !) Thanks for sharing your hobby. Interesting stuff mate !

@RobsAquaponics 4 жыл бұрын

It has been suggested but I haven't tried it with mesh but did have a pipe with holes drilled in it at one point. I like to tun them at the surface now. Cheers mate.

@RobsAquaponics 10 жыл бұрын

In some instances they do but they also put extra load on the pump depending on what type you use John.. For us it's a win win situation, less power being used & no hum of the air compressor so I'm happy :D You can also go the other way & use air to pump the water which adds the O2 as well as circulates the water for the system.. Good for smaller systems from what I have seen though.. Cheers sir & hope alls well down your way :)

@ralphwhitten6426 10 жыл бұрын

Thanks to you and the video links you shared, I tried my hand at this...I used what I had on hand..didn't buy any thing extra. This is my results.. Venturi Effect for aeration of fish tank..

@RobsAquaponics 10 жыл бұрын

Looks like they're working well for you Ralph... Should keep the fish happy.. Cheers mate, Rob.

@ralphwhitten6426 10 жыл бұрын

Rob Bob Thanks brother. Your videos helped a lot!!

@JoelDmello722 3 жыл бұрын

nice design. and nice explaination.

@RobsAquaponics 3 жыл бұрын

Glad you like it Joel. Cheers mate & all the best.

@anggarou8834 8 жыл бұрын

Really helpful...thanks a lot... Rob :)

@RobsAquaponics 8 жыл бұрын

+Angga Rou No problem Angga. Hope it helps give you a few ideas. 👍

@DonMallicoat 10 жыл бұрын

The key I found to small bubbles was a 40% ish angle and then heating it and squishing it into a slit as well as adding a sponge to the intake. I had over purchased on my pump and had plenty extra so I took a T off the main outlet and diverted it back with the Venturi . I'm interested to see your next test.

@RobsAquaponics 10 жыл бұрын

Cheers for that Don.. Might be a while before the next test but will be playing around with them when I make up the bio filter for the AP later today.. Not sure if I will do a clip on it though.. Cheers mate...