THANK YOU! this was really helpful and im glad you kept it super simple!
@florinG Жыл бұрын
Thanks for your feedback glad u found it useful 👍
@bravogenetics Жыл бұрын
Thank you for making this waaaay more simple then it really is lol
@SuperGizzzmo2 жыл бұрын
Hi there hope you are okay, I just want to say when I open the box and I watched a few videos this scared the heck out of me as I am not that techie. I panicked and was minutes from sending them back to Amazon. Until I watched this video I can’t believe how are you calm someone down with a very exceptional video. Keep up the good work
@florinG2 жыл бұрын
Thanks for the feedback, I appreciate it.
@chaplinesque1112 жыл бұрын
Same here.
@omeokelevra4940 Жыл бұрын
Thank you, very helpful. I made a mistake of going out and do interviews and realized later on that the sound was off the "ALWAYS ON" option is really a must
@billrhea Жыл бұрын
This is the best video on these
@mg-pictures Жыл бұрын
When checking sound always use headphones for monitoring. Don't trust db bars only as there could be other sound issue.
@cldumitrescu Жыл бұрын
Merci Florin. Chiar utile sfaturile tale.
@DannaGesellchen2 жыл бұрын
Please turn up your volume.
@florinG2 жыл бұрын
Hi, thanks for your feedback, I’ll consider that ✌️
@nickinthecutt2 жыл бұрын
lit! thx u i didnt even know about split mode
@pbvision968811 ай бұрын
very usefull. thanks
@florinG11 ай бұрын
You are welcome
@Paulydeetv11 ай бұрын
THANK YOU / GRACIAS HERMANO🇵🇷🫶🏽
@florinG11 ай бұрын
You’re welcome!
@AnilKumar-zo2eu Жыл бұрын
Thank you so much sir for your packaged information
@florinG Жыл бұрын
You’re welcome, thanks for the feedback.
@fernandocrespophotography8680 Жыл бұрын
Excellent video. This was very usefull. Thank you!!!
@florinG Жыл бұрын
Great, thanks for your feedback.
@mcneilbelle2 жыл бұрын
Very useful thanks
@Kiswa2 жыл бұрын
Thank you very much. Why when I use only one transmitter the sound is not clear when I wear earphone only one ear seems to work ?
@imzaazmi7 ай бұрын
Thank you for this video 👍👍
@florinG7 ай бұрын
You’re welcome ✌️
@kirisgarage85903 жыл бұрын
Great stuff and you did a very informative video 👍
@LucyLeheilleix2 жыл бұрын
Thanks for a very informative video!
@florinG2 жыл бұрын
I'm glad it helped 😊
@jahbeanz1943 Жыл бұрын
VERY GOOD VIDEO THANXX!!!
@MyThrivingMind Жыл бұрын
Easily understood!❤
@staceylewisdesignsКүн бұрын
So I’m a noob on audio and recently purchased the ride wireless go 2. I have a simple question that I’m having difficulty getting an answer to. Should I always plug the ride wireless into the camera port? I saw a video editor say it was best to have audio on the ride and on the camera itself. If I plug it in then I’m only using the rode wireless correct and audio saving to the SD card on the camera or both the rode wireless go 2 and the camera along with video? I need to know this to help find the audio in editing. Thanks for any help and I’m happy to get this answered by anyone. Thanks
@florinG15 сағат бұрын
Hi, yes recording audio in camera will make it easier when you edit. If you want to record on the transmitter at the same time however you need to enable that feature because it’s not on as default, cheers.
@alirezacharghand11872 жыл бұрын
thats so grate
@glenowen988 Жыл бұрын
Great video, iv bought the rode but I haven't got a camera, can I use these wirless rode mics with my Android phone ?
@florinG Жыл бұрын
Yes, it works like a dream, here’s a video on how to do it hope it helps RODE WIRELESS GO II Connect to a mobile phone and how to use the Rode Interview Go kzfaq.info/get/bejne/d7WemtmivsnSlHk.html
@bobmusikk2 жыл бұрын
I've seen a couple of videos saying that the best level in camera was 3.. well
@unseen_nepal Жыл бұрын
why 2nd channel has low noise level compard with 1st channel. Do you have any solution without factory reseting.? However i have fixed it by factory resetting the receiver.
@kiminicole45732 жыл бұрын
I need help for how to setup for my canon rebel sl3 I'm trippin
@eduard.amihai75452 жыл бұрын
hello if i register in camera with just one transmiter and you use split mode i can't transform the audio track in stereo afterwards(it just mute the track if i try)...but if you use the track that you have as a backup you can do it..have you experienced these problems?how you fix this?
@Jackgunned2 жыл бұрын
Nice video. Is there a recommended standard gain setting that I can expect good quality audio?
@sjeditor2 жыл бұрын
The recommended gain setting is whatever will get your voice to the -12 to -6 level. Trust your camera meters! On his a7iii he set his rode to -12db and +1 on his camera. On my a7iv it is different setting which is why you gotta look at your camera meter. They don’t lie.
@jimmymcgill8112 Жыл бұрын
@@sjeditor What setting do you use bro for a7iv?
@zalle19 ай бұрын
Can you use one transmitter on its own? Without receiver?
@florinG9 ай бұрын
Hi, yes. If you connect the transmitter to the Rode central app and enable always record function, then your transmitter will not only send signal to the receiver but also record on board. Accessing the audio file on the transmitter can be done again via the app, thanks👍
@moesafi8301 Жыл бұрын
yo i need help i got the same exact set up however the mic displays on the transmitter but not on the camera, PLEASSE HELP
@florinG Жыл бұрын
Hi, go to camera video settings, and make sure audio level display is on. Some cameras only allow accessing those setting while in video mode, thanks.
@Isabelonvideo2 жыл бұрын
Hi. I am looking for an excellent wireless setup for vlogging.. is this it ?
@florinG2 жыл бұрын
Yes this is a very good wireless setup for vlogging, dunno how good it is in terms of interference because I have not been to many place with it but because it has audio backup it should be too big of an issue plus rode claims it's immune to RF interference, so yeah. For vlogging I personally would use it with a lav, but works great even without, thanks.
@Isabelonvideo2 жыл бұрын
@@florinG Thank you for your help!
@DeezKnightz Жыл бұрын
Why is channel 1 on your camera way louder than channel 2 and how do you fix it to make them even because during playback the left side speaker will be way louder than the right side.
@florinG Жыл бұрын
Hi, there are ways to access a channel and edited it individually within a track. From your comment I take that you’re trying to record on the camera but one channel is louder than the other is that right ?
@DeezKnightz Жыл бұрын
@@florinG yes exactly
@florinG Жыл бұрын
Hi, sorry for the late reply. You’re experiencing this issue because you’re in merged mode and you have safety channel turned on, thanks.