Accsoon CineView Nano | iPhone as a camera monitor

Рет қаралды 4,660

Күн бұрын

Accsoon brings us some affordable tools to make it easier to film yourself. By using what you have (your iPhone) you can use that as a wired or wireless monitor for your camera setup.
NOTE: The camera latency (that is very little) is likely because of shooting at a slower shutter speed.
SECTIONS
00:00 Intro
03:33 Accsoon SeeMo Demo
05:05 Accsoon CineView Nano Demo
08:20 Final thoughts
PRODUCT LINKS
- Accsoon SeeMo (wired): geni.us/ynpzBO
- Accsoon CineView Nano (wireless): geni.us/qZ16Mz
- Micro HDMI to HDMI Coiled Cable: geni.us/eFjy9
- NP-F550 Battery 2-Pack: geni.us/bgQGH
GEAR I USED TO FILM THIS VIDEO
- Sony A7CR: geni.us/boBd6
- Sont A7C: geni.us/MU8l8bo
@sonyelectronics #sonyelectronics #sponsored #sonyalpha #a7cr
- DJI Mic: geni.us/I7WBuB
- DJI Mic 2: geni.us/gn5IP
DISCLAIMER
Links to products are affiliate marketing links which means that if you purchase through the links I will earn a commission for the transaction but you will not be charged anything extra.
#FilmYourself #Accsoon @Accsoon

Пікірлер: 31

@PocketOKrypto Ай бұрын

Thank you! I just picked up the Nano and your video was very helpful. 🙂

@cuatroequismx 5 ай бұрын

bro this was the exact video i was looking for! thanks!

@rogerseng 5 ай бұрын

Glad I could help!

@uzoegbuzie5341 5 ай бұрын

Insane! Love it

@iEkimmu 5 ай бұрын

I've had the Nano for about a month now. I love it! Not only can I just set the camera to timelapse and just look at my phone sitting a few meters away from it, but now I can stream via rtmp directly from the app (via mobile network) and record directly to my phone in 1080 without any dropping frames. There is lag (~40-70ms), but I can not say that it annoying. On iPad for some reason lags more, with iPhone everything is fine :) Best purchase I've made in a while)

@Jmartinezvega 5 ай бұрын

Which ipad do you use?

@iPhone-Cinematograhy 5 ай бұрын

Very helpful, thank you for posting.

@rogerseng 5 ай бұрын

You're very welcome!

@benyominniasoff4114 7 күн бұрын

@@rogersengmlbu

@fabianunternaehrer7402 3 ай бұрын

Perfect, thanks :D

@DEFYfitness Ай бұрын

Good video! I watched a couple of others and this gives me clarity to how they both work and the differences. My main question is, if I am shooting vertically (for reels per se), can I mount this vertically too and does the app rotate and display my footage vertically as well?

@Moustafa11 4 ай бұрын

Great video! Thank you. Question: Are you able to record on the devices using the Nano through the wireless connection?

@CookingAhPa 4 ай бұрын

I think seemo cannot charge the phone, correct me if i am wrong. I got the nano, having some connectivity stability issues with my samsung phone, but iphone and ipad is more stable. For ipad, there’s an issue to update the firmware.

@ACCSOON 3 ай бұрын

We have released an update of the iOS App, which fixed the firmware update issue and added more new features like SRT stream, LUT baked in recording and live stream with LUT.

@CookingAhPa 3 ай бұрын

@@ACCSOON i will try again tonight then, i still couldn’t update it 2 days’ ago

@ne0nlightz 4 ай бұрын

Thanks for the video! So would you say the Cineview Nano is better than the Accsoon Seemo? Since its a newer product and also allows for Wireless functionality. Would it be an "upgrade" over the Seemo? From your video it doesnt seem like there's any cons to go with the Cineview Nano vs the older Seem besides just a bit of additional slight lag. The CineView Nano seems to have a new 5V Video In via USB-C, and almost all the other ports on it are the same with the Seemo(e.g., HDMI In, 5V Video Out) except obviously the HDMI Video Out because it isnt hardwire connected to a camera.

@ACCSOON 3 ай бұрын

SeeMo is a totally different product, it connects to the iOS devices via USB cable but Nano transmits the video to mobile devices (both iOS and Android) wirelessly.

@danielserrano6260 Ай бұрын

What is the benefit of having it wireless, when you always have to go back to the camera to start the recording. Of course I can record to the phone, but I would like to start recording on the camera by tapping on one button…