This is the 2nd of a series of videos explaining the Major issue with the Roland SPD SX that has only a 2GB SD card installed. The series explains the issues with that and also the solution to upgrade to 16GB.
Пікірлер: 54
@drumrollwithjoel Жыл бұрын
Thank you for the comic relief with the song. This whole surgical operation is causing me anxiety but that definitely helped me relax
@davefox56173 жыл бұрын
Hey Leigh, I know this video is 2 years old, but you helped me tremendously! Got the memory card won't format error so I watched your instructions and now my SPDSX works like a charm. Thank you so much!
@kevkek073 жыл бұрын
Thank you very much Leigh for this video ! Last night while practicing I had a "Memory Error" on the SPD-SX, and I couldn't format the memory card... Not much info about it on the Internet... I was kind of worried as I have a gig tomorrow night. Until I find your video !! I bought a 10€ 32Go microSD card and started the "surgery" ! The only tricky part was to separate the top part of the SPD from the bottom part ! It took a few minutes but I got it !! Anyway, everything works fine, I'm relieved !!! Thanks again !!!
@markusdinger89235 жыл бұрын
hi man. just needed your tutorial because my sx wouldnt show up on my computer. so I just got the card our to do a backup and it worked perfectly. thanks so much! bless ya
@mitchellan-ebbott74085 жыл бұрын
This was already a great video, but then THAT SONG!!!!! Thanks for the walkthrough!
@offshorebeatsband21565 жыл бұрын
Cheers for this mate. Just upgraded mine and was really easy following this tutorial. 👍👍
@poncin5 жыл бұрын
Thanks, worked like a charm! Got a samsung evo 32GB micro sd working ! A 13 euro upgrade. Upgraded the device with the latest Roland 1.8 firmware first!
@kevinkalka63212 жыл бұрын
I replaced with Samsung microSDHC EVO Plus 32GB card. I turn my SPD-SX on and there is nothing! I reopened to check my white ribbon bands were connected properly. They were, then checked the power strip leading to the device, and still nothing!! Do you have ANY SUGGESTIONS.
@onesong20012 жыл бұрын
@@kevinkalka6321 My SPDSX recently developed a common fault I had not heard of. It wouldn't switch on. The fix is to beat a pad while you're pushing the power button. I had to do that for a couple of months (not continually :) and then it went back to normal. Maybe that problem developed in your machine when you took it apart.
@sticksez4 жыл бұрын
thanks so much this is best video i've come across on this topic...
@XxASSASINofWARxX2 жыл бұрын
Thank you helped a lot. 32gb now!!!
@user-bf4ir8tl5n8 ай бұрын
Great videos, Thanks for sharing. Worked perfectly for me. I managed to exchange the SD card without disconnecting the white stripes. You can access the SD card from the back of the SDP-SX and have enough space even with the stripes still on. Thanks
@cariaddrums8 ай бұрын
Glad it helped
@BoomBapProductions Жыл бұрын
great video! thanks alot for the tutorial, you may have just saved me a lot of $$. You had me cracking up along the way too. Cheers brother!
@kod14055 жыл бұрын
Thank you so much Leigh! I finally got myself to do this upgrade and all went very smoothly, mostly thanks to you! And the little song you sung is legendary! Where can I buy it? :)
@Stiktriks5 жыл бұрын
Pure Legend !!!!
@sunillightandsoundbarpali66085 жыл бұрын
Barpali
@freeman58674 жыл бұрын
Thanks for the video.
@dmssajeewasounds16262 жыл бұрын
Very good job 👍
@abuwao3 жыл бұрын
Thanks for this information. But still have one challenge with an spds sx that I’m fixing. When we strike the pads, some of them don’t respond. 2. While playing backing tracks, the pad will either skip or stop playing. Pls I need help
@Lankydrum5 жыл бұрын
really, really great tutorials. all parts are right on, thank you. Have you ever heard of a new SD card also fixing the intermittent and completely annoying loop/click desync issue?
@ImmortalBurns4 жыл бұрын
Found a potential fix for that. If you set all your sounds on that particular kit to Mono rather than Poly, it’ll use less system resources. Would reckon that’s more of a ROM memory than a RAM memory thing
@federicoscaglia9438 Жыл бұрын
ehi! thanks for the video! so the operating system is not on the memory card, and you can turn it on even without it? just making sure before approaching this!
@paolocompagnon86285 жыл бұрын
Guys, may I ask your help please. Unexpected rain dropped on my SPD SX. Did not notice at first and I made the mistake to turn it on. It started bugging hard. Did not manage to turn it off properly and I had to get the switch off. Do you know if it is a dead end for the pad ? Anyway to fix it ? Thank you
@jimmyjames78093 жыл бұрын
I am just about to start work on upgrading my 2 spd-sx's using this method...wish me luck! Here goes! 😬😬😬
@LT198843 жыл бұрын
Do you know if i can do the same with yamaha dtx 12?
@Notenstrauss5 жыл бұрын
Hi guys - thanks for the video. What type of file system should the card be formated in FAT?
@JoelCarbonellGonell3 жыл бұрын
Hello! I checked the filesystem of the original SPD-SX Card and it was FAT32. Anyways when i plugged back on the device it said that memory needed to be formatted, so i dont think it's a big deal!
@JoelCarbonellGonell3 жыл бұрын
Thanks for this video, it was really useful, although I don't get why 32/64gb is "not recommended" any further info about that? Why it would be "not good"? Anyway I just put a 16gb MicroSD card I had laying around. I did not take pictures about the positioning of the ribbon cables and I had to come back to this video to get it right (not the right slots, but the right "ply"), so maybe better listen to the video he got the point!!! I did not glue the MicroSD card (I'm on lockdown and I don't have the right glue for this matter, only superglue and a kind of slow dry silicone...) but the "locker" seems pretty strong anyway. Thanks again.
@davefox56173 жыл бұрын
What is the best 16g card to use?
@draconianjames4 жыл бұрын
No matter what i do i cant get the shell to remove! Please help!
@mauriciorojaspardo3 жыл бұрын
Pregunta : Que velocidad tiene la targeta sd ??? 80mb/s - 98mb/s ?????
@emon1120072 жыл бұрын
HI THERE PLEASE HELP ME I NEED PART FOR Roland SPD-SX SE REAR PANEL TOP PANEL BOTTOM CASE TOP CASE Thanks
@WIRECOOLEY4 жыл бұрын
Hi, Leigh. Thanks a lot for these videos. I ´ve changed the memory card and all seems to work properly but after replacing the card, SPD SX doesn´t connect to the SPD SX Wave manager, I mean, the connection to the PC works, but the wave manager doesn´t recognize the samples that I load. I have loaded several samples, but the wave manager doesn´t recognize them. Do you know what could be wrong? Thanks again
@WIRECOOLEY4 жыл бұрын
Hi. Finally I´ve discovered the problem. I had not updated the Roland to version 1.8. In previous versions, the system doesn´t recognize more than 4 GB. Once the system is updated, everything works perfectly. Thanks.
@WIRECOOLEY4 жыл бұрын
@@cariaddrumsThanks to you. Hope your wife get well very soon
@domainguru4 жыл бұрын
Hello sir I like your videos . I do have a issue with my Roland spd s it shows " memory damage" how do i fix this problem please help and you can in box me than you.
@Beatsmith2005 Жыл бұрын
I just can't get the case off. I can just about see that there are plastic tabs that have now gone white from stress, from me pulling. I just can't seem to get it open. I'm trying to upgrade as the SPDSX keeps tripping up and/or stopping the backing track when using triggers (yes I'm on 1.0.8). I'm stuck!
@Beatsmith2005 Жыл бұрын
I got it. The solution is in looking at the holes at the back. Intuitively you want to pull it towards you, but actually you have to push it away from you, so that it frees the holes for the jacks etc at the back. Basically use the back as a clue! I bent some of the tabs, but none of them snapped off (yet...). Thanks for the videos.
@carlossimmonssds8543 жыл бұрын
I changed mine to a 16GB but once I go to check the memory still shows the 4GB. Did I do something incorrectly??
@JoelCarbonellGonell3 жыл бұрын
Hello Carlos! I just updated the MicroSD card of mine and i had the same problem, the only thing you have to do is to update it to the last Firmware (1.8) and then it will show 16gb (At least it worked for me!) Let me know if it worked! Kind regards, Joel.
@mauriciosantibanez52474 жыл бұрын
Hola! Donde puedo obtener una almohadilla y/o goma para la roland spd sx agradezco tu ayuda gracias..
@sanjeethxavierrodrigues48735 жыл бұрын
Hi. I didn’t get the ‘spit the glue’ part. Pls help. What am I supposed to do once I insert the card, to the two blobs of glue.
@sanjeethxavierrodrigues48735 жыл бұрын
Great. Thank you. I ended up buying a DTX m12. 🙏
@sanjeethxavierrodrigues48735 жыл бұрын
Your content is next level 💯 And you really take the time out to explain like I do. Found my type. 💯💯
@gameoverc62 жыл бұрын
Do you have to format the memory card before you put it in the machine to make it work?
@cariaddrums10 ай бұрын
I did, as long as its clean with no other files it should be fine.
@sashadrummerboy29955 жыл бұрын
At the price of the SE this is a way more affordable solution if you are not too nervous.
@fadibader65024 жыл бұрын
I have a problem that I opened the device for the reason that I changed the skin and it was working but now it no longer works what is the problem
@fadibader65024 жыл бұрын
Leigh Smith I installed them all. I don't know what the problem is
@djaswant5 жыл бұрын
64GB works also!!
@wahzukolosebo12642 жыл бұрын
Saya dari indonesa Saya mau tanya . Kenapa pad roland spsx saya tombol plus minus nya tidak bisa untuk geser tidak fungsi kenapa ya