Rolex Case Tube and Crown Replaced due to Stripped Crown!

Рет қаралды 22,652

Күн бұрын

Hi Guys!
For all of those who will leave comments about how dirty the crystal is? LOL... I did clean it before returning it to the customer! Thanks for watching...
Looking for watches, printers or tools? Check out my Amazon Page for Great Deals!
www.amazon.com/shop/petergrande
Have a Question? Need a watch Fixed? Something Designed?
Send me a Message:
profile.php?...
If you like these videos, please subscribe and give a Thumbs UP!
Every Little Bit Helps!
For more jewelry and watch related repair info, visit my website at
www.myjewelrybench.com
If you would like to help keep this channel funded, consider
a donation at
www.patreon.com/myjewelrybench

Пікірлер: 38

@sdi1111 2 жыл бұрын

Hi Peter, thanks for making it look so easy. I have a 20 ATM Vetta watch with screw down crown, but it looks very similar to the problem you describe in this video, except I can not see any thread on the case tube. A lot of gunk has come out from inside the crown, which includes a disintegrated casket/seal. How do I go about locating parts for this watch?

@24hourgmtchannel64 3 жыл бұрын

Great video. Thanks. So broaching was for older crown tubes that had no grooves for a tool correct? Any idea on the correct tube part number for a 1960 Rolex Oyster Perpetual 1002? I see 24-5300 or 24-520.

@wildernessofzinn17 Жыл бұрын

Thanks much for this video. It is very helpful. But may I ask, how about case tubes and crowns for older vintage Roleces (plural?). Say, 1940s. How does one go about finding the correct case tube and crown?. I see tubes and crowns online, but do these fit older watches?.

@robertgaither7223 3 ай бұрын

Great Video how to you determine which size crown your watch takes?

@govnasir2121 4 ай бұрын

Nicely done

@GentStyle 6 ай бұрын

Great video! My 1500s case tube recently broke off into the crown. I sent you a DM on Facebook.

@4godandcountry663 2 жыл бұрын

Great video!! Clean out out the inside of the glass before putting back together. That’s all🥴

@edgarroman5913 Жыл бұрын

Great work

@robertrios6649 2 ай бұрын

Excellent!!!!!

@louisdon2762 2 күн бұрын

Great Video. I have the same problem and don't want to leave the watch at a local place. Can you give me the part #'S / SIZES FOR A ROLEX OYSTER PERPETUAL DATEJUST 16200 3135 movement (36mm case) if you have them....Thanks in advance.

@appleman29 2 жыл бұрын

how much does this service cost?

@erikroelinkcitizen2302 3 жыл бұрын

Nice and good video

@NorthJerseyFooter 2 жыл бұрын

How much does this repair cost for the customer?

@hwy664444 2 жыл бұрын

Good video

@michaelmaggi7637 Жыл бұрын

Good video. Thanks for sharing. Is it me or that date wheel looks hideous?

@sureshlingabathina 7 ай бұрын

Excellent

@MB-nh3rg 3 жыл бұрын

Hey Peter! I love your videos, please could you show us how to make a rolex watch in blender? Im a content creator and im making jewelry for my avatars in a game which i play!

@MuhButtsBeenWiped 2 жыл бұрын

Why would anyone let their watch get that cruddy?

@macfl3594 2 жыл бұрын

One important question.What if the case tube is is too small and demaged and there is not original tube to replace it?Is it possible to drill the case and put a bigger tube with appropriate crown?I have a watch with NH35 movement and the tube it's very thin unlike the Seiko's tubes wich my watchmaker has but he tells me that is unposible to do.Maybe he dont have the tools for that and he don't want to tell me that's the reason.I'm sure that i watched a video where a watchmaker does exacrly that on one watch.Pls if you can answer to me Mr.Peter plssss

@Aikidobear129 10 ай бұрын

I noticed you didn't get an answer to your question- Anything is possible given time, patience and as you mentioned the right tools- the question is - how much money do you want to invest in your watch to get it done? I hope you managed to accomplish your goal as I've owned watches that aren't what others would consider valuable but to me they're priceless :)

@codyjarrett9685 Жыл бұрын

Hi Peter . Where did you get the new crown and gaskets from

@watchesandjewelry Жыл бұрын

Used crowns can be gotten on eBay. Be aware that you don’t always get really good crowns on line however. New has to be purchased from an authorized services.

@Steve-qs9eq 3 жыл бұрын

What was the clear sealer? Was always taught to use green loctite

@wch4972 2 жыл бұрын

may i know where i can buy/get the tube/stem/crown parts?

@reazallykhan8614 Жыл бұрын

Ebay

@wch4972 Жыл бұрын

how to measure the size to buy the parts?

@j_holtslander 27 күн бұрын

So are the case tubes universally sized? Would a Seiko use the same case tube tool as a Rolex?

@watchesandjewelry 27 күн бұрын

lol. No. Would be nice if there were standards.

@mariagarciagarcia5391 3 жыл бұрын

Hello Peter!. I need your opinion, I’m scuba diver. Do you think that Rolex Twin Lock system is good enough for diving? I have an Oyster Perpetual, I’ve used it several times in my dives and it’s bee ok. Do you think that when Rolex says “100 mts waterproof “ it’s “more realistic” that other brands?? Thank you very much, I really enjoy your vids. Love & health from Spain!!!

@watchesandjewelry 3 жыл бұрын

Hello Maria. I would think that diving with a Rolex would be fine, if you have it tested. The only issues I’ve seen is that used watches are also unknown. Meaning you will not truly know the maintenance of the watch. The weakness is in the case tube and crown. If gaskets fail, that is typically the first place to allow water in. Sometimes only from forgetting to tighten it, but more often wear on those parts. Any Rolex dealer will water test your watch and let you know the condition. It is safe and allows no water to enter durning the test. I also recommend that if you do dive with any watch, have it checked annually as salt water and pool chemicals do damage to the gaskets and sometimes the steel case tube. I dive with mine all the time and only check it when open. It for service. Just remember to keep the crown tight (by hand) and generally you should be fine. A super quick test is to wait for some hot weather, get your watch wet and see if it digs up. Having it checked would be my first suggestion though. Good luck. Thanks for the question

@mariagarciagarcia5391 3 жыл бұрын

@@watchesandjewelry Hi Peter, Thanks for your answer!! I bought the watch in an AD at Playa del Carmen, Mexico, four years ago, brand new, so I know it’s been treated very well, always rinsed with fresh water after sea and pool. Glad to know you dive too! Sorry I don’t understand the “super quick test”. Would you explain please? Sorry for my bad English. Thanks!!!

@davidervin7345 2 жыл бұрын

Thanks for the informative videos. I have a Rolex 6542 with a stripped tube, and maybe a crown. I've ordered a new Rolex tube/gasket. I've taken old watches apart & put them back together but tackling my Rolex is a much bigger risk. For one thing I have seen nothing anywhere about releasing the stem. I presume, since I don't see a release button in online pictures, that I will need to rotate a small screw near the stem. I would like to know for sure before I get myself into trouble. The old jeweler that used to take care of my watches died this year and I'm loathe to send my watch off to some unknown.

@watchesandjewelry 2 жыл бұрын

I believe that there is a screw for the clutch. Get a tube of loctight for the case tube. All you will need is about 1/2 of a drop. Be cautious when inserting the new tube into the case Practice a few times so that you know how to install it correctly. Good luck.

@sdi1111 2 жыл бұрын

You're right for being cautious about where you take your watch. I have a 1960's Seiko Chronometer - one of a kind (+/- 1sec per day) and took it to the local watch repairer. He had it for 2 years and returned it in worst condition. I know he took out many good working parts and then glued down an undersized crystal. The crystal fell out and tore all the hands off when I wore the watch to bed. Ironically, I took it to another repairer who killed it off forever. Hopefully there are a few honest guys left who take pride in their work.