Roller Stamp Your Stamped Concrete Patio! (How To Rock & Roller)

No video

Roller Stamp Your Stamped Concrete Patio! (How To Rock & Roller)

Рет қаралды 83,050

Жыл бұрын

#EverythingAboutConcrete #MikeDayConcrete #rollerstampconcrete
This video shows us using a Rock & Roller stamp to stamp a concrete patio slab.
This is the first time Luke and I have had a chance to use the Rock & Roller from Marshalltown. It's an Ashlar Slate pattern roller stamp.
The patio slab is 24' x 21'. We're using colored concrete with a tinted liquid release.
We had to make sure we started using the roller stamp early enough so the concrete was still quite soft but not soft enough to sink it.
The video shows this process very good. We timed the starting process just right.
MARSHALLTOWN ROCK & ROLLER STAMP:
marshalltown.c...
EMAIL ME - mikeday@everything-about-concrete.com
LEARN FROM ME - PRIVATE MEMBERSHIP AREA:
www.theconcret...
GARAGE FLOOR EPOXY FLAKE COATING COURSE:
www.theconcret...
MY STAMPED CONCRETE COURSE:
mike-day.mykaj...
MY CONCRETE SLAB COURSE:
mike-day.mykaj...
FOUNDATION CRACK REPAIR COURSE:
mike-day.mykaj...
GARAGE EPOXY FLOOR COATING COURSE:
mike-day.mykaj...
VISIT MY WEBSITE:
www.everything...
USE THE SAME TOOLS I DO:
36" MBW POWER TROWEL:
imp.i284638.ne...
ScreeDemon Gas Powered Vibratory Screed:
imp.i284638.ne...
Screedemon Battery Powered Vibratory Screed:
imp.i284638.ne...
14' Screed Board for ScreeDemon:
imp.i284638.ne...
MARSHALLTOWN SHOCKWAVE VIBRA-SCREED:
amzn.to/2tZ79ti
TOPCON LASER LEVEL:
amzn.to/2VrJ3zV
DEWALT PENCIL VIBRATOR TOOL:
amzn.to/2Km5Zis
INVERTER GENERATOR LIKE WE USE:
amzn.to/2XfWfwe
BULLFLOAT:
amzn.to/2U1Kx2F
HAND FINISHING KNEE BOARDS:
amzn.to/2TZmTUj
MAG FLOAT & STEEL TROWEL SET:
amzn.to/2IgmDOq
2" MARGIN TROWEL:
amzn.to/2G33KNn
CONCRETE PLACER OR KUMALONG:
amzn.to/2I00gxp
CONCRETE FINISHING BROOM:
amzn.to/2UytU2B
CONCRETE SCREED:
amzn.to/2WZxtwm
CONCRETE EDGER:
amzn.to/2GbGkEp
CONCRETE GROOVER:
amzn.to/2PaL414
BOSCH HAMMER DRILL:
amzn.to/31AHnaN
MY RECOMMENDED TOOLS PAGE:
www.everything...
SUBSCRIBE to my email list and get my FREE video guide on how to get the perfect broom finish on a concrete patio:
forms.aweber.c...
Follow me on Twitter:
/ creteexpert
Follow me on Instagram:
www.instagram....
Follow my Facebook Page:
/ everythingaboutconcrete

Пікірлер: 106

@ronu6724 Жыл бұрын

Started from wrong end first poured first stamped. Looks great, alot of work for two guys you made it look easy.

@charlesviner1565 Жыл бұрын

👍the sound of the roller made my dog tilt his head 🐶LOL

@GRUBB-MUDD Жыл бұрын

haha, thats funny. u made me laugh today bro... thanks, wd 40

@MikeDayConcrete Жыл бұрын

I didn't realize it was so squeaky when I edited the video.

@mattschoular8844 Жыл бұрын

Looks good. Thanks Mike. It will be nice to see the end result once the yard is finished up.

@MikeDayConcrete Жыл бұрын

Yes it will

@wegotthis2734 Жыл бұрын

I own a few of them but i only use the on sidewalk jobs or doing borders. I don't really care for the solid line it leaves at 3' wide but it definitely takes skill to do it like you guys did.

@MikeDayConcrete Жыл бұрын

Thanks

@jamespalladino9884 Жыл бұрын

I bought the seamless texture last year, I was a little bit intimidated for us to buy our first one and have it have to be kept straight like with cobblestone or asler so we started with seamless as it obviously does not matter, we used it on a couple patios, it’s only 24” but can cover some ground, like you said it is 110% all about timing but if you are good at what you do like you guys are and take your time, there really shouldn’t be any reason why you can’t keep it straight, gonna buy another pattern this year, total time saver, it looks great, good job as always mike👍

@torquer9669 Жыл бұрын

YES I need a small stamped patio badly. Replacing an old deck. Looks great

@MikeDayConcrete Жыл бұрын

Thanks

@rangepro Жыл бұрын

The color was great and so was the roller!!

@MikeDayConcrete Жыл бұрын

Thanks

@fearlesscheshirecat1411 Жыл бұрын

That looked like a really good mix. The last 2 trucks I got were absolutely horrendous. It was supposed to be a 5 inch slump and right out of the truck even adding water, it took 10+ passes with the bull float before it would close everything up…..there was so much rock in it it was absolutely horrendous. And that was 20 seconds after getting it out of the truck.

@pascalgreaney3526 Жыл бұрын

HI Mike Very good job We screw a raised timber from screed to screed in the direction of roll pull the roller backwards only keeping the roller tight to the timber change the timber for each new roll it helps a lot

@rongrose3746 Жыл бұрын

Looks great using the roller/stamper ! Pretty cool attachment !

@MikeDayConcrete Жыл бұрын

I think so too!

@Nate-xf6ns Жыл бұрын

Great video. Enjoy your weekend Mike!

@MikeDayConcrete Жыл бұрын

Thanks 👍

@derek.castle 6 ай бұрын

should have backed your concrete truck in where the half ton is parked. run your bull float perpendicular to your screed pulls. Do longer pulls with your screed board. Spin your roller so the pattern is not the same as the previous pass. you finished rolling where you started placing, thats why its so hard at the end. should have started near the deck. might get better contrast with the powder release than the liquid but it is a lot messier. job looks good.

@anthonysteinebach4596 3 ай бұрын

Good job , well alot for 2 with the heat

@johnfahey7215 Жыл бұрын

Great Job! Never seen that technique before.

@MikeDayConcrete Жыл бұрын

Thanks John

@santiagocastillo9867 4 ай бұрын

Seems like I would have started stamping on the area where I started pouring first. Just the way we do it tho. Looks good and you guys did a great job…!!!👍🏽

@MuddyfeetConcretePumping Жыл бұрын

Looked like it worked pretty well. Good job

@MikeDayConcrete Жыл бұрын

It did, thanks. How's things in TX

@MuddyfeetConcretePumping Жыл бұрын

@@MikeDayConcrete pumping along. Finally got some cooler temperatures for the mornings.

@frontlinediy1814 Жыл бұрын

Man that's a pretty cool tool. New tools are mostly always fun:)

@edstevens9357 Жыл бұрын

Another great lesson

@MikeDayConcrete Жыл бұрын

Thanks again!

@treymann497 Жыл бұрын

Awesome good job

@MikeDayConcrete Жыл бұрын

Appreciate it!

@GRUBB-MUDD Жыл бұрын

thats a nice roller, $$$$$

@MikeDayConcrete Жыл бұрын

Works good on an open slab like this.

@juliahelland6488 Жыл бұрын

Looks great! Thanks for sharing this! 💯

@GRUBB-MUDD Жыл бұрын

luke is like, "why do i have to drag this mike?" good job on this vid bro. fast pace kinda (very smart) great thimbnail. btw this concrete niche is on its "A" GAME (when it comes to making videos)

@MikeDayConcrete Жыл бұрын

Appreciate it!

@notsofast5495 3 ай бұрын

Looks like you have to start the roller at specific place on each run also is that correct. It looks like you had the same size print squares along the starting edge also.

@proconcretecoatings4916 Жыл бұрын

I always wondered why you didn’t use a roller, I had one about 13 years ago. A bit spendy but sure speed things up

@engrsamsonkodjo7038 Жыл бұрын

Wow this is amazing boss

@joer4595 Жыл бұрын

Looks great 👍

@MikeDayConcrete Жыл бұрын

Thank you

@christopherw4527 Жыл бұрын

I'm glad you tried that thing. I've been paranoid to try one out. I doubt I could get the seams any better at the roller ends. I don't think a person could get the seams fixed up to where they could blend with a touch up wheel. Not me anyway.

@MikeDayConcrete Жыл бұрын

If the slab wasn't so wide then the seams are a lot easier to match up.

@christopherw4527 Жыл бұрын

@@MikeDayConcrete Makes sense. I first considered trying one out on some sidewalk pours.

@MikeDayConcrete Жыл бұрын

I think it would work good on sidewalks.

@matthewbacken1785 4 ай бұрын

Hey Mike, I watched another stamping video and I wanted to know what that soft cut saw was.

@jlawlar Жыл бұрын

should have poured a pad for the pool pump, or was that the short video we got the other day ;) nice job, awesome looking

@MikeDayConcrete Жыл бұрын

We should have!

@777cygnus Жыл бұрын

I remember doing a Paving job for a guy invented the First. Aluminum roller. He was asking us how it would work ?and how to get. Texture When stamps where made outa metal ughh. Man I’m old. Lol he was from. Mo or KY ? Cool guy had $$ mighta been better. Heavier. Think filled em w water ?Looks good 😎👍

@MikeDayConcrete Жыл бұрын

Thanks

@BenBNC Жыл бұрын

can we talk about the pros and cons of tinted liquid release vs. straight powder release

@MikeDayConcrete Жыл бұрын

I can on another video.

@notsofast5495 3 ай бұрын

At the 4:40 mark so you guys have a board in the middle of the pour that Luke is running his end of the screed stop of?

@davidvuchetich3045 Жыл бұрын

Very cool

@cranksinatra7810 Жыл бұрын

Always been curious how well these work, thanks for demoing it!

@Eric-yl9mw 6 ай бұрын

@mikedayconcrete what about joints in a pad like this, how did you cut them in after stamping so they didn't look like.... Joints in concrete

@lukemorgan3855 Жыл бұрын

Nice job! Wondering, how come you don’t use a power screed on all jobs?

@gregbenedict3253 Жыл бұрын

Not sure if you've tried prolines magnetic stamps. Can really fly on slabs like this.

@MikeDayConcrete Жыл бұрын

I haven't, I'd like to try them though!

@jacobchandler3443 Жыл бұрын

We always end up with the circles stamped in where the magnets are and my guys can’t line them up as well

@derekbutts1782 Жыл бұрын

Mike, I'm a concrete business owner out of Ohio . I was learnt to do stamping with the powder release . I'm interested in how it's made or what the liquid release is . Seems to be a lot less of a mess. Teach an old dog new tricks eh ? Lol Are you literally adding the tint to a mineral spirits ? And just mixing with a drill or something

@MikeDayConcrete Жыл бұрын

Yes, we add about a cup or two of powder release into a 2.5 gallon sprayer of liquid release. Just shake it, and keep shaking it as you use it. Works great for us as you can see. Very little mess and washing the next day is a breeze.

@Nick33779 Жыл бұрын

I think Id get call backs if I used a roller. Was thinking about trying a seamless one though, I dk

@stegen9008 Жыл бұрын

Can you come to sweden and make this for me 😅 take the roller with you 👍

@MikeDayConcrete Жыл бұрын

That would be a good business trip!

@bman6502 Жыл бұрын

How much time are you really saving vs the potential to have concrete set before you finish??? With stamps, if we get on it a bit late, we can increase pounding..

@steved.5628 Жыл бұрын

Looks awesome, what’s the next step? Seal it ?

@MikeDayConcrete Жыл бұрын

Saw it, wash it, seal it.

@sammydeleon7288 Жыл бұрын

Looks Good! How much time do you need between leveling the concrete to rolling the stamp roller?

@barryrohrmeier2399 Жыл бұрын

Mike did you pick up the bill for the concrete ? Great video as always 👍

@MikeDayConcrete Жыл бұрын

Haha, no, Luke did.

@josuemejia3797 Жыл бұрын

Hey Mike my name is Josue Mejia I do home renovation in Houston in the kingwood area, I’m a subscriber and i see your videos a lot. Something i would like to add to my work is stamping and the question is i would like to know the different ways to purchase your training stamping video. By the way I’m from Honduras. I do thank you for sharing your skills. I believe i can learn stamping just by looking at your videos but also i know if i get your training video i can get the knowledge to do it the right way.

@MikeDayConcrete Жыл бұрын

My stamp course is here: www.theconcreteunderground.com/offers/3hhjPXHx/checkout I also have The Concrete Underground. This is a monthly fee that includes the stamp course and a lot other training.

@moisedia4930 3 ай бұрын

Hi! I need a stamped concrete, how can I get it

@oby-1607 4 ай бұрын

Would be nice if you could add water inside this roller for more weight.

@ryanwright2527 Жыл бұрын

How much black pigment do you normally add to the release agent??

@jcdiaz2xm Жыл бұрын

Awesome job sir.. I have a few questions for you. 1) what kind of retardant did you use to keep that concrete from setting ? 2) what amount of retardant was used per yd?

@MikeDayConcrete Жыл бұрын

No retardant here. You can ask for some if you want to, low dose or regular dose, they put it in when they batch the load.

@darrenminnick9168 Жыл бұрын

Hey Mike. Great videos! Thank you for the great advice. I was just wondering about cracks. Do you have any advice or techniques when trying to repair a crack in stamped concrete. Is there a a certain kind of material that works best for filling cracks or techniques to help blend it in with the texture of the stamped concrete.

@joadojesus4997 Жыл бұрын

its available bro

@joadojesus4997 Жыл бұрын

its cold shika

@bmck-ss3zb Жыл бұрын

How does that work if you are up against something? Like a pad against the house

@MikeDayConcrete Жыл бұрын

If you're rolling along the house, ok. If rolling towards the house, not so good, you'd have that small section with no imprint when you bump up against the house.

@raulzamora8928 Жыл бұрын

I had to see the video twice. I think the roller was singing "rolling rolling rolling rawhide "

@MikeDayConcrete Жыл бұрын

I know, little squeaky.

@joadojesus4997 Жыл бұрын

hw can i getdat roller in uganda

@jeffmason6280 4 ай бұрын

Do you do tint in your release?

@MikeDayConcrete 4 ай бұрын

Yes, we do on some jobs. We did on this one. We put about a cup of charcoal powder release in 3 gallons of liquid.

@sergiosanchez-sj2tp Жыл бұрын

Where did you buy the roller ?

@onetruesoldiervt3686 Жыл бұрын

tip !!! you should give your guys shovels them come alongs arent as near as efficiant than a square shovel guys at work joke about them come alongs saying they are for landscaping the shovel is really great for tight areas but the come along i will say is ok to pull back if you have a big job 🎉🎉