THX for showing ...

It looks fantastic 👍

No boat shop is complete without classic rock on the radio. Good job guys! Man, I miss painting.

Awesome video. Purchasing thanks to this.

unless you are in a in a 72 degree area need to sand with 1000 then buff and keep a bug netting up too before painting

wet sand and buff after works great

Does the thinner help in the self-leveling? What about buffing the final product to get a glass finish?

I've heard that 2 part paint is no longer availablr in Canada. Is this true for your product? I haven't used your paint yet, but your varnish is my first choice.

Nice job

do you have a video how to repair scratches?

I'm interested in this for a small carbonfiber hull. Can you get glass like finishes with wet sanding and buffing after two coats of color?

Nice lil boat! I want one too but it is expensive for me now.

Tell us more about the foam roller, (8:05)

fantastic finish and no tipping?

Can I use a two component epoxy filler in between the sanding and the final finish coat? I have some little pits and scratches that didn’t get filled with paint, I want to fill them after sanding the primer coat.

How much paint do you load the brush with for tipping?

Thx.. like it, is that a '57 Panel in the background

Which color is used? Number 875 maybe?!

That's very nice. Can you feed this paint (and primer) into an airbrush pistol ? Or you have to use the roller ?

No tipping off?

Great video will this polyurethane work on aluminum boats also?

watching that first guy try his hand at painting was painful to watch. It seemed he had informational overload and didn't retain anything as a result.

Why not spray it?

how is the poly urethane strength wise compared to the epifanes mon urethane? I have my boat in the epifanes mono urethane for a number of years now, but it can scratch pretty easy in my opinion. It also developed some cracks in the paint now after i think 5 years of it being on. So i was thinking maybe the poly urethane wil stay on longer? It is a steel boat, so i want the paint to cover it as good as it can because i dont want rust on it.

I have 120 grit for pre primer sanding, and 320 for sanding the primer pre paint. Is that ok?

would it work on Polystyrene materials?

Looks amazing for no tipping! You weren’t left with any air bubbles at all?

dumb question but how do you measure 7 percent of paint thinner

Change the station??? Try working to that type of music and maybe you can get something done. Good music to work to

No link to Purchase?

it says on the can that this product is not for below the water line? why are you painting below the waterline?

So, if there is a repair to do on this later, how easy is it to patch a repair in and does it blend nice or can you not do that?

Never use bare cardboard for mixing. The surface will soak up components from either component and therefore corrupt your mixture. Put some masking tape on the cardboard first.

This taint solutions, poly urethane, can be aplly over epoxy lamination repairs? Thank you so much!

How tough it this paint? Can it be used for other applications? Specifically....can I paint my tractor with it?

Opening 2020 on this video

Where do you get the rollers that don’t fall apart

What brand of foam roller did you use? Is this an epoxy primer?

How come you didn't roll and tip?

Doors 🎶🎶🎶

Why couldn't I use this in a hydrostream Viking speedboat?

This is a Fantastic Video... Great Information... Beautiful Results... ... but.. the background (noise) music was distracting, unnecessary, & annoying... We just want to hear YOU talk... Thank you for sharing this great video.

I wish they would change the radio station.

High schoolers could have done a better job at making this video. Plus I see that you don't bother to answer anybody's questions here in the comments. Maybe high schoolers would be a better choice than you people to do both.

there is no way that is really epafanes paint they are using in that video i just tried epifanes paint on my boat and ill never use it again it wont cover it runs the only way its usable is if u do layers so thin that u can see through them and do at least four coats of primer and four coat of paint i would never recomend this product to anyone

Thanks for the info.....but no way could I work with all that crappy music in the background

If I buy your paints, I don't want to be locked into having to buy your high priced mystery cleaner/ solvent as well. I would like the choice of buying a generic cleaner such as Mineral spirits, Acetone, Xylene, etc. Hiding the chemicals in your proprietary cleaner only makes me mad as hell. This is a form of extortion that will steer me right away from all your products. Its a pity because your products are excellent. But I will NOT BE HELD HOSTAGE TO A GODDAMN SOLVENT!

Pathetic job... but Epifane SOOO forgiving....