No video

Rolling and Tipping,Boat painting, Episode 3 part 1

  Рет қаралды 79,968

Phil Murphy

Phil Murphy

Күн бұрын

Пікірлер: 52
@billmadle1235
@billmadle1235 Ай бұрын
I enjoyed your video and style. I will be doing mine
@philmurphy3549
@philmurphy3549 Ай бұрын
@@billmadle1235 cheers Bill, I hope it goes on well 🤞👌
@susanc.8009
@susanc.8009 9 ай бұрын
Agonizing to see you work that slowly. After painting that bit under the teak with a brush use a 7” foam roller with only enough paint to do about 3’ from top to bottom. Do it quickly. Then come back over it with the roller slowly enough and lightly enough to not cause bubbles. May have to blend that bit under the teak with a brush. Put more paint on your roller and continue like that. It’s like painting a wall, not like painting the Mona Lisa. Speed is important with most paint. Take the tape off as soon as you’re done the last coat, because it can take dried paint with it. If painting outside, what tape you use is important, because not all painter’s tape holds up to the sun as advertised. Test the tape first.
@philmurphy3549
@philmurphy3549 9 ай бұрын
Other than that you liked it 😂
@susanc.8009
@susanc.8009 9 ай бұрын
@@philmurphy3549 yes-just want to let others know how to do it and not be afraid to do it. I’ve painted hulls for many years-it’s easy peasy. I paint mine from a raft. Decks are a bitch.
@philmurphy3549
@philmurphy3549 9 ай бұрын
@@susanc.8009 that’s good to know, trust me some of the other episodes are more comical and less boring, although I have to say, it was slow but really really satisfying, and yes I had lots of time on my hands too, the masking tape did come off ok as I used from memory a good grade, fortunately the boat is still inside so I’ve the luxury of being able to not have weather issues, the deck I’ve not done yet, more episodes are in the pipeline, just have to get some enthusiasm to get back at it…. Thanks for your input 👍 Regards Phil
@coldh4nd
@coldh4nd 3 жыл бұрын
Good work. You should load the tipping brush so it’s damp with paint before tipping. That way it won’t suck paint from the surface and drag it across and away from you edges
@philmurphy3549
@philmurphy3549 3 жыл бұрын
Hi Jimmy, yes I agree, I found in the end that it worked out far better by doing just that dear boy 🍻👍
@johndoyle1455
@johndoyle1455 3 жыл бұрын
Hi, ta for advise, just about to start painting a boat... I understand the nerves you were feeling.
@philmurphy3549
@philmurphy3549 3 жыл бұрын
Once your into it, you’ll be fine it’s quite easy once your in the rhythm dear boy 👌😎
@KZtheFisherOutdoors
@KZtheFisherOutdoors 4 жыл бұрын
Wow this looks so easy .Thanks for the tips .looks Great. NEW SUB 💥👍👊
@philmurphy3549
@philmurphy3549 4 жыл бұрын
Hi KZ, thanks for subbing, and yeah it’s easy once your into a rhythm 👍🍻🙋‍♂️
@SloMo2723
@SloMo2723 4 жыл бұрын
Hi Phil, Great video! One question, If you can't get the whole job done finished in one day, can you come back the next day and pick up where you left off without noticing a difference? Thanks and all the best from California
@philmurphy3549
@philmurphy3549 4 жыл бұрын
Hi Monte, my apologies for not getting back to you quickly, I didn’t see your question until now sorry, I think you’d need to complete the area your wanting to do rather than stop halfway through, because you’ll definitely get a line from where you finish to where you start. If you look at the video’s on the upper section I’ve done, I’ve split that up into painting sections by masking in places you’ll not see, because the area is to large to do ,and keep wet to successfully do in one hit. Hope this answers your question dear boy, stay safe and thanks for your patience . California love to visit 🇺🇸🙏
@SloMo2723
@SloMo2723 4 жыл бұрын
@@philmurphy3549 Thanks Phil! All the best, stay safe
@huseyinhalil1453
@huseyinhalil1453 3 жыл бұрын
hello good work. I would like to learn something. Is the boat painted with acrylic paints
@philmurphy3549
@philmurphy3549 3 жыл бұрын
Hi Huseyin, If you go onto the paint company called “ International boat paint” you’ll find the paint called Toplac, this is an enamel paint, mine is Oxford Blue in Colour. It usually takes two coats for brush or one for Rolling and Tipping, you can use this paint on most boat types, fibreglass,metal, wood etc. The formula is on their website. Hope this helps 🙋‍♂️😎👍
@huseyinhalil1453
@huseyinhalil1453 3 жыл бұрын
@@philmurphy3549 thank you very much my friend. 😊😊
@philmurphy3549
@philmurphy3549 3 жыл бұрын
@@huseyinhalil1453 , your welcome 😎🙋‍♂️🍻
@normanmercer6704
@normanmercer6704 2 жыл бұрын
Hi, just caught this series. Did you thin the paint, if so how much? Is it enamel?
@philmurphy3549
@philmurphy3549 2 жыл бұрын
TopLac by International is the paint and it is Silicone alkyd premium Gloss Marine Enamel, it retains both the colour and Gloss longer than conventional Gloss Paints dear boy 👍
@highlander99999
@highlander99999 4 жыл бұрын
good work finished perfect
@philmurphy3549
@philmurphy3549 4 жыл бұрын
Thanks Highlander , I appreciate your comment 🙋‍♂️🍻
@Kx25020001978
@Kx25020001978 4 жыл бұрын
Loos great what kind of paint are you using ?
@philmurphy3549
@philmurphy3549 4 жыл бұрын
Hiya, it’s paint by International,available worldwide I think , thanks for watching 🙏🙋‍♂️🍻
@pmnfernando
@pmnfernando 4 жыл бұрын
@@philmurphy3549 was it Perfection or Toplac? thanks!
@philmurphy3549
@philmurphy3549 4 жыл бұрын
Yes it was perfection paint 👍
@bee2333
@bee2333 3 жыл бұрын
Stupid question...i know you can polish gelcoat but what about topside paint???
@philmurphy3549
@philmurphy3549 3 жыл бұрын
Nope not a stupid question actually, I’ve polished the cream upper section and it’s looking good, (think there’s an episode on that). Hopefully I’ll be back on it soon, once this long Covid allows 👍 Regards Phil
@JavierCozar-mg3iw
@JavierCozar-mg3iw Жыл бұрын
What kind of paint did you use? Brand? Thanks
@philmurphy3549
@philmurphy3549 Жыл бұрын
Hi Javier, The paint I use is by International Boat Paint, it’s called TopLac and the Colour is Oxford Blue. If you live in a hot country,maybe thin it slightly with white spirit, as this will keep a wet edge as you move along the boat 👍 Regards Phil
@ballygarran
@ballygarran Жыл бұрын
Is there any reason why you decided to roll paint rather than compressor spray? Thanks in advance
@philmurphy3549
@philmurphy3549 Жыл бұрын
Hiya Ballygarran, at the time I was ready to paint, I didn’t have a compressor or spray gear, so I went for the rolling and tipping, I’m actually thinking of flatting the hull off and having a go at spraying it also as I think it would make a good episode plus it would show the two options, I’ve now got the spraying equipment plus, I’ve plenty of time on my hands haha! Regards to you my Friend 🇮🇪
@ballygarran
@ballygarran Жыл бұрын
@@philmurphy3549 thanks for your answer. I’ve never owned a boat but for some reason my wife has fallen in love with the idea so it looks like I’ll have a new project some time in the foreseeable. It will have to be something that needs a fair bit of work as we have a small budget. So your video diary is absolutely fantastic. I’ve watched the first 9 episodes tonight but it’s off to bed and I’ll catch up with the others tomorrow whilst the wife watches some rubbish on Netflix. All the best from Co Galway
@philmurphy3549
@philmurphy3549 Жыл бұрын
@@ballygarran thanks for your kind words dear boy, Remember, if you do get yourself a little project, very little is off the shelf, and it’s going to test your patience and D I Y skills, oh and rather deep pockets too. Well I better get on with some more episodes if your upto number 9 …. 🙋‍♂️🇮🇪🇮🇪
@ballygarran
@ballygarran Жыл бұрын
@@philmurphy3549 any more videos to come? Any more projects?
@philmurphy3549
@philmurphy3549 Жыл бұрын
@@ballygarran yes more videos to come, just need to get filming, John ( cameraman) , hopefully will be able to do some more filming soon, I think we are on episode 31 at the moment. 👍
@JuanGomez-oh3zj
@JuanGomez-oh3zj 4 жыл бұрын
Why can be sprayed?
@philmurphy3549
@philmurphy3549 4 жыл бұрын
Yes I’m thinking it can but you will have to thin it out first. I’m going to try that method 🙋‍♂️🍻
@dougwilliams7667
@dougwilliams7667 2 жыл бұрын
What color blue is that?
@philmurphy3549
@philmurphy3549 2 жыл бұрын
Oxford Blue from International Boat Paint, toplac from memory dear boy 👍
@martizzy
@martizzy 4 жыл бұрын
Interlux suggests you go vertical when u tip
@philmurphy3549
@philmurphy3549 4 жыл бұрын
Hiya mailformiller, I considered that, but as I’ve rubbing straights nearly the full length of the boat, I decided to tip the way I did, I think I got what looks like a good finish thankfully. I think I partly tipped vertically on the upper sides in the cream, and I did see a slightly better finish. Thanks for your comments dear boy 🍻🙋‍♂️
@martizzy
@martizzy 4 жыл бұрын
Phil Murphy - I liked your vid, which was good confirmation of other tipping vids I’ve watched. I’m building a 17’ paddleboard, of which I’m going to paint the hull red (Interlux). Learning about tipping, “maintaining the wet edge”, etc. Probably the biggest frustration is finding out when one should pull off the masking tape - everyone has a different answer! (Going with after the final coat has completely dried, pulling tape 45 degrees away from the paint
@philmurphy3549
@philmurphy3549 4 жыл бұрын
I’d film it, as it’s always useful to see alternative versions of rolling and tipping, as for keeping a wet edge I agree it’s difficult, but where I’m located (north west England) together with being in a warehouse, I wasn’t to troubled with it tacking off to quickly with the blue, but I did thin out the cream by 5% from memory due to the area’s being a little wider. Going onto to the masking tape, I had issues with a cheaper paper brand, but zero with the blue tape, and yes pulling at 45 degrees is a must, I also learnt that using a hairdryer just to put a little softness back into the paint also helps, ( well it did for me, as my warehouse is cold even in summer). Thanks for watching and your comments, and good luck with your project 🙏👍🙋‍♂️
@KScherb1
@KScherb1 5 жыл бұрын
Too hard to hear you
@philmurphy3549
@philmurphy3549 5 жыл бұрын
Sorry about that, I’ve improved the sound quality since that episode was done, welcome aboard KEcherb 🙋‍♂️🍻
Rolling and tipping, boat painting,Episode 3 part 2
33:47
Phil Murphy
Рет қаралды 81 М.
How to  paint hull ,Roll & Tipp Awlgrip
22:29
Kenny's Yacht Maintenance
Рет қаралды 239 М.
Секрет фокусника! #shorts
00:15
Роман Magic
Рет қаралды 45 МЛН
Little brothers couldn't stay calm when they noticed a bin lorry #shorts
00:32
Fabiosa Best Lifehacks
Рет қаралды 21 МЛН
Люблю детей 💕💕💕🥰 #aminkavitaminka #aminokka #miminka #дети
00:24
Аминка Витаминка
Рет қаралды 581 М.
Parenting hacks and gadgets against mosquitoes 🦟👶
00:21
Let's GLOW!
Рет қаралды 13 МЛН
TOP TIPS FOR PAINTING YOUR BOAT!
21:58
BoatworksToday
Рет қаралды 254 М.
Rolling Epifanes Poly urethane
15:03
Epifanes N.A.
Рет қаралды 207 М.
How to paint a car at home with a 3” brush. Please share
12:19
Coach painting cars and vans
Рет қаралды 73 М.
Paint application by roller, laying off by brush
6:18
John Barnard Ltd.
Рет қаралды 189 М.
Rolling and Tipping | Do's & DON'Ts of painting your boat.
19:01
Tiny Boat Nation
Рет қаралды 255 М.
How to Prep and Apply AWLGRIP (awlcraft 2000)
21:02
Boat painting & restoration with Frankie Bushong
Рет қаралды 115 М.
ALL ROLL AND NO TIP ;-) PAINTING YOUR BOAT WITH ALEXSEAL!
46:29
BoatworksToday
Рет қаралды 696 М.
Epifanes: Roll & Tip with Alec Brainerd of Artisan Boatworks
3:12
Artisan Boatworks
Рет қаралды 177 М.
Getting Rid Of Old Screw Holes In Fiberglass
12:53
BoatworksToday
Рет қаралды 326 М.
Секрет фокусника! #shorts
00:15
Роман Magic
Рет қаралды 45 МЛН