rope making

Рет қаралды 488,594

7 жыл бұрын

This video shows how to make rope from recycled twine which had been used to tie tomatoes up in a tunnel house. The rope making mechanism is very simple and can be made from the simplest of tools using wood, no8 wire (0.16" or 4 mm) , rubber bands and
12 mm (approximately) steel rod.

Пікірлер: 43

@markgreen1619 3 жыл бұрын

U have to twist 1 time at the trailer for every 5 twists at the tree to compensate ..hope this helps

@Olga_Slavnaya 6 ай бұрын

Дед всем работу нашёл))) молодец!

@rvalasini9938 3 жыл бұрын

yes. I enjoyed it :). I love low tech solutions. Often Low tech is really high tech in my book .

@reydeang 2 жыл бұрын

Thank you very much. A very informative video.

@russwendel7605 7 жыл бұрын

As you twist from the tree end you have to continue twisting at the machine end , I use a pulley with weights on the tree end to keep tight .

@HerveybaymuseumAu 5 жыл бұрын

Russ is absolutely correct. This is why the rope is laid looser at the twister end.

@marycahill546 6 жыл бұрын

Wow. Fantastic!

@Rustaholic777 2 жыл бұрын

You really should just go to eBay and buy a New Era Rope Machine. I have a couple of them and the gearing really makes rope a lot faster. So far the biggest rope I have made is 3/4 inch and 140 feet long. I made it to drop trees in a very busy back yard .I did a very precise drop right where I told a crowd of people that I had had heard betting I would take a corner off the garage. So easy to do those very accurate falls if you know what you are doing

@Ade-nh6cb Ай бұрын

Yo siempre veo rincón del hoguera costa Rica

@goldendreamer2122 3 жыл бұрын

For every five times you turn the tree end crank you need to turn the other end one time.

@jackal6902 9 ай бұрын

Wonder how that’d go using bail twine? Anyway, for “learning” you’ve done amazing.

@usaleh84 5 жыл бұрын

Interesting video. Loved it

@nuwanchandimal5745 10 ай бұрын

Great job dear sr❤

@Chr.U.Cas2216 6 жыл бұрын

I love to recycle also!

@adviearifi6868 6 жыл бұрын

chru cas

@almazshadkinskiy4651 6 жыл бұрын

Awesome!

@user-md8kt5ez1x Жыл бұрын

the best!!!👍👍👍😁

@qazaqqazaq4665 6 жыл бұрын

Қазақ үй, қазақша арқан есу👍👍👍

@freemy3301 6 жыл бұрын

ขอบคุณครับที่ได้เห็นวิธีพันเชือก

@fernhoppertimberworks8037 3 жыл бұрын

Good job but if you put it on the ground and roll it around with your foot it will get the kinks out as well ...good job.

@mufpower 3 жыл бұрын

Great job dear

@joeorton1218 6 жыл бұрын

Cool my foot has been here

@robertroot3044 3 жыл бұрын

That was great!!! Kids in the US don't know how to do anything, Except use a cellphone. Or credit card. Do you make bull whips too?

@ANNtique 3 жыл бұрын

For the twine what’s the best knot to initially join them together before rope making?

@yawningdog9894 2 жыл бұрын

Matthew walker knot

@rayed51 2 жыл бұрын

Reef knot also called square knot.

@myfriendsgroup8934 4 жыл бұрын

Good

@wagnervieira7598 Жыл бұрын

Oi sou brasileiro eu faço corda também Desse tipo aí

@eliaslazaro1405 6 жыл бұрын

Parabéns 😊

@zloi_kolxoznik2456 4 жыл бұрын

👍👍👍

@user-cd2fs3xq8n 5 жыл бұрын

Klass👍👍👍🇰🇬

@jayj4142 3 жыл бұрын

If you watch this video, he explains what you need to do in order for it not to be loose at the machine end: kzfaq.info/get/bejne/qtWpgq6Azpaoo4E.html

@user-st5pk2og6t 6 жыл бұрын

Ну это что получается придётся 2 дерева рядом сажать,ждать пока они вырастут,потом ещё прицеп покупать.Проще верёвку купить.

@aatmaramnegi5673 6 жыл бұрын

Андрей руки из плечей cultivation of mushroom

@user-st5pk2og6t 6 жыл бұрын

Слабо по русски

@stopdoingthat.hereletmedoi7320 3 жыл бұрын

kzfaq.info/get/bejne/qtWpgq6Azpaoo4E.html At 4:45 they discuss your question in your video at 4:45 about why one end of the rope is tight and the other end is not.

@jayj4142 3 жыл бұрын

And just FYI, there’s not a thing wrong with using geared machines for this. In fact, my geared machine has a 4/1 mechanical advantage. Yours is 1/1, so have fun staying out there running it 4x longer than I have to. lol

@sonnyajvoll5865 2 жыл бұрын

I really like seeing non-mechanical ways of doing things that are usually automated, so I thought this was cool. I'd be keen to see your setup too, it's interesting checking out different approaches to a situation.