Just a quick look at a few new products from @RottweilerPerformance for the KTM 790 Adventure R. WE install the all new Tail Tidy, the Transfer, and the Rear Master Cylinder Guard in this video with step by step instruction
Пікірлер: 52
@mhilde77444 жыл бұрын
👍you cant beat ROTTWEILER. Quality stuff-great company
@P4ddyC4ke4 жыл бұрын
I'd recommend using some dielectric grease in any wire connectors anytime you replace stuff. Helps to prevent water intrusion and corrosion over time. Some cool products there.
@EverySingleSunday4 жыл бұрын
Not a bad recommendation at all, thank you
@8andsk8353 жыл бұрын
The trans saver is a must. Great video!
@EverySingleSunday3 жыл бұрын
Love mine. It also showed me how hard I was always shifting
@8andsk8353 жыл бұрын
@@EverySingleSunday I ordered one yesterday. It really is astounding how fragile that whole area of the ktm is. Still pumped I got the 790!
@march.48094 жыл бұрын
I’m liking that tail tidy. Might have to get one. I put the CRG mirrors on my 790S 2 weeks ago. Love them! Installed them on some bark buster guards.
@EverySingleSunday4 жыл бұрын
I put mine on as well. It's really a neat system they have
@CraigSmith5684 жыл бұрын
I really like this new bike you have. Looks like really good quality parts you are installing. I really like the tail light blinker combination in the plate frame. You are definitely planning on taking that bike in a lot more wicked places than I would ever try.
@EverySingleSunday4 жыл бұрын
The 790 is amazing. One if my favorite purchases I've made in a long time
@finrampe4 жыл бұрын
I'd suggest to add that loctite on those shift shaft screws too. Mine came off on my very first ride and had to shift by hand to ride home where I left the tool bag. Nice stuff from Rottweiler - can't wait for airbox and alu-subframe at some point..
@EverySingleSunday4 жыл бұрын
I've got over most of the bolts that I can access on this bike. I've heard too many horror stories
@caseywillyoumarryme4 жыл бұрын
That transaver is very clever 👍
@EverySingleSunday4 жыл бұрын
It is definitely a neat piece
@gt75004 жыл бұрын
Please be very careful if/when you remove the already tiny stock blinkers and tail light! Glad to hear you are leaving the stock brake/tail light on. Otherwise you may be rear ended.
@EverySingleSunday4 жыл бұрын
This just makes it brighter than before. Blinkers are easier to see as well
@jlsierra852 жыл бұрын
You do realize you mounted the tea saver upside down. The thicker part goes on the top. If not it touches the triangle and when shifting down it does not bounce back into place.
@EverySingleSunday2 жыл бұрын
It rubbed when it was the other way. This was a proto unit. I now have different mounting hardware and it’s the other direction.
@damytzeus4 жыл бұрын
thanks for sharing video. i like the idea of the tail tidy and i'm not sold on the tail tidy. the turn signals don't look very bright. i think that i'll go with the cyclops turn signals and look for another tail tidy.
@EverySingleSunday4 жыл бұрын
To each their own. I always end up breaking stiff off my bike if it hangs off. This one did it for me .
@ronquinlan67054 жыл бұрын
Nice looking products. Wish Rottweiler would use Torx fittings since that is what KTM uses on this bike
@EverySingleSunday4 жыл бұрын
I think they went with the Allen since it had a smoother head and wasn't recessed like the stock part
@jimkonugres8454 Жыл бұрын
Awsome video-Transaver question, do you HAVE TO make the adjustment to the top or can you leave the stock adjustment. Im concerned that I make the wrong 'adjustment' to the top and create a shift issue. Thanks
@EverySingleSunday Жыл бұрын
Unfortunately, there is not an adjuster in the linkage, only if you move a tooth on the top I found that it raised my shift or just a hair and put it exactly where I wanted it
@vicmoca62293 жыл бұрын
Lastima que no tengáis para matrículas de Enduro. Más concretamente en españa. Aquí el tamaño se asemeja a la vuestra pero es más pequeña que vuestro portamatriculas. Las medidas son 132x96 mm.
@eeronieminen4 жыл бұрын
Do you tape over your licenseplate number but then show it from the other side anyways?
@EverySingleSunday4 жыл бұрын
I really wasn't concerned about it. Only did it so I would have an excuse to put some of my stickers on there
@eeronieminen4 жыл бұрын
@@EverySingleSunday In my ccountry there was a dude who showed his face and motovlogged his first rides with 125 2stroke supermoto. High speeds, burning rubber and wheelieing through the town all that. Dude was identified from the video and lost his licence after a week. Happened in finland but might be possible in usa too, doubt it tho.
@EverySingleSunday4 жыл бұрын
Ya, most my stuff is offroad. I'm not too worried about it. But, that would be bad
@PackedandReadyFranco4 жыл бұрын
the skid plate u have doesnt allow for a center stand i beleieve is that something u dont need ? just wondering im new to this
@EverySingleSunday4 жыл бұрын
That is correct. But, no need for a centerstand in offroad :)
@NMdesertracer4 жыл бұрын
Thats a lot of EYE Candy!
@EverySingleSunday4 жыл бұрын
The tail light yes ... The other 2 Pat's are protection (and pretty)
@corecass4 жыл бұрын
wait.. your state isued every single sunday has a different back in print. dont know what you wanna do but might as well do nothing about it than :P
@EverySingleSunday4 жыл бұрын
It's the weirdest thing, but we aren't complaining
@gregorymallory4 жыл бұрын
Looks great. How can we get those Every Single Sunday stickers for our bikes?
@EverySingleSunday4 жыл бұрын
You're local to us, ya? We can meet up and I'd be happy to get you some
@gregorymallory4 жыл бұрын
Unfortunately I live in Georgia. I can message you my address on Instagram. You follow me.
@EverySingleSunday4 жыл бұрын
Please do
@liprippintv48984 жыл бұрын
Your Title has a typo just looking out for you
@EverySingleSunday4 жыл бұрын
I appreciate it, thank you
@liprippintv48984 жыл бұрын
Travis come up to North Idaho! Look up gold creek lodge! It's a restaurant in the middle of the woods! You have to ride to it and it has amazing views
@EverySingleSunday4 жыл бұрын
@@liprippintv4898 I'll be there from June 3-8th for sure.
@colefoubert83534 жыл бұрын
You running a tune from rott for the decat?
@EverySingleSunday4 жыл бұрын
I am now. But I didn't for the longest time. Bike still ran great with the stock map
@colefoubert83534 жыл бұрын
Thank you for the feedback. My head has been spinning from all these Decat threads. So you think my hog will be safe running the oem map with the arrow system? Did you switch to the tune just to smooth out fueling for throttle reasons?
@EverySingleSunday4 жыл бұрын
I ran mine on the stock map for 2000 miles with a decat, and rode it hard. I did the race tune to add fuel to it make make it run better. Now it doesn't stall as much and has more low end power / torque. It does make more power all around, but that's Isn't what I was after
@diesel87624 жыл бұрын
So put metal parts on a plastic tank.. why?
@EverySingleSunday4 жыл бұрын
Tank is very strong... the plastic spigot on the bottom is very brittle and is a known weak point. But, you do whatever you like