Roundhouse Bertie RC conversion

  Рет қаралды 3,398

Geoff Smith

Geoff Smith

4 жыл бұрын

In this video I steam up my Bertie after converting it to radio control using hardware supplied by Roundhouse Engineering. I check for leaks and adjust the servo/steam regulator.
Radio Control equipment (transmitter, receiver, servo and power switch) bought from Fosworks UK.
Bunker and other detailing parts supplied by Locoworks UK.

Пікірлер: 10
@DanzibarDrums
@DanzibarDrums 4 жыл бұрын
Is that the standard Roundhouse safety valve? Seems to operate a lot better than mine which just oozes steam continuously!
@gasmith841
@gasmith841 4 жыл бұрын
I bought the loco new. After about 10 runs I disassembled and cleaned the safety valve and re-fitted it. That seemed to help with the weeping valve...many owner complain about the safety valve :)
@essenceofsteam4822
@essenceofsteam4822 3 жыл бұрын
Where did you buy all your gear from like the transmitter, receiver the switch and the controller?
@gasmith841
@gasmith841 3 жыл бұрын
Fosworks
@essenceofsteam4822
@essenceofsteam4822 3 жыл бұрын
@@gasmith841 thanks. I’ve not sorted it out with roundhouse themselves who are providing me with everything I need from there factory.
@timothyboles6457
@timothyboles6457 3 жыл бұрын
Is there not a reverse on this locomotive?
@gasmith841
@gasmith841 3 жыл бұрын
This loco has a slip eccentric on its valve gear. This means you have to push the loco at least one revolution of the wheels in the direction you wish to travel before opening the steam regulator. All Roundhouse 'Basic' series loco's use this method. Their more expensive 'Classic' series loco's have a fwd/rev control in the cab.
@1953PE
@1953PE 3 жыл бұрын
why do you need to check for leaks, all you have done is put a servo in it
@gasmith841
@gasmith841 3 жыл бұрын
You also have to exchange the steam regulator needle for one suitable for rc. In the kit you get a new steam regulator housing which means new fibre washers. That's the checking for leaks part
@1953PE
@1953PE 3 жыл бұрын
@@gasmith841 Thanks, I made a Accucraft Superior radio contolled years ago and all I had to do was change the regulator handle out and put a servo in, easy.
Roundhouse Bertie Part 6 - Some modifications explained
12:54
Summerlandsteam
Рет қаралды 10 М.
New loco unboxing...we got there in the end
16:23
Geoff Smith
Рет қаралды 1,9 М.
아이스크림으로 체감되는 요즘 물가
00:16
진영민yeongmin
Рет қаралды 32 МЛН
LOVE LETTER - POPPY PLAYTIME CHAPTER 3 | GH'S ANIMATION
00:15
Happy 4th of July 😂
00:12
Pink Shirt Girl
Рет қаралды 39 МЛН
1 or 2?🐄
00:12
Kan Andrey
Рет қаралды 47 МЛН
Victoria BC: 3. Brand New Custom WD Bertie - How to Operate & FIRST RUN! (Plz Sub & See Description)
10:42
Terry’s Live Steam, O, G, Real Trains, & Cobi!
Рет қаралды 1,2 М.
steam Engine HF
4:18
David Ham
Рет қаралды 162
RH George Part 29: Fitting the Radio Control gear (2)
13:36
Geoff Smith
Рет қаралды 1,1 М.
LAST SURVIVING RAILWAY ROUNDHOUSE IN UK! Barrow Hill Roundhouse, Chesterfield
35:32
Doncaster Model Engineering Show 2018
10:47
Matts BitsNBobs Workshop
Рет қаралды 2,3 М.
'Roundhouse The Video' - 1989
29:01
Roundhouse Engineering Co Ltd
Рет қаралды 2,7 М.
Roundhouse Bertie Part 3 - Fitting a Summerlands Chuffer
16:16
Summerlandsteam
Рет қаралды 10 М.
Hornby 00 Gauge Live Steam! - 1,000 Subscriber Special!
12:15
That Model Railway Guy
Рет қаралды 80 М.
We have 2 Chuffs per rev!
1:57
Frankentrain Laboratories
Рет қаралды 73
아이스크림으로 체감되는 요즘 물가
00:16
진영민yeongmin
Рет қаралды 32 МЛН