🟢 Router Table Insert Plate and Router Lift Build - DIY

🟢 Router Table Insert Plate and Router Lift Build - DIY - Part 1

Рет қаралды 3,522,893

4 жыл бұрын

In this video i show you my router table insert plate and router lift build. I made it on the table saw extension wing i made before. As for me it's super simple router lift diy project.
All plans I ever made I collected in one place. Save this link for future - I will add new plans to this collection and don't forget to subscribe to my channel to stay tuned.
drive.google.com/drive/folder...
Support GRINwood:
PayPal: grinwooddesigns@gmail.com
Other table saw upgrades here:
• 🟢 Table Saw Extension ...
GRINwood shop:
www.etsy.com/shop/GRINwood
Follow GRINwood:
/ grinwoodprojects
/ dakhnogregory
/ grinwooddesigns
/ grinwooddesigns
Music:
Clover 3 - Vibe Mountain
Follow The Shadows - The 126ers .
Would you like to use my videos in your media projects?
Please contact me: grinwooddesigns@gmail.com

Пікірлер: 594

@jenelmarian9946 Жыл бұрын

This is a valuable addition to my woodwork collection kzfaq.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.

@fosterechalimbana2160 9 ай бұрын

I just finished building the handrail on my deck kzfaq.infoUgkxfQ5_mgwq6PcudJvAH25t-I4D-3cTPz4z and used this great little router to clean up the top rail before the final sanding and stain. It was light weight but packed lots of power. Either size battery didn't seem to make it top heavy and I'm a 64 yr old women so I really appreciated how easy it was to use...................... CORDLESS only way to go !!

@lesneilson5632 4 жыл бұрын

I have just completed my router lift mechanism based on your approach, so thanks for the simple but effective way of raising and lowering the router in the table, it works well enough to be enjoyable

@richardroehr5020 4 жыл бұрын

What a great design, especially for the small home shops that don't have a lot of money. Thanks for sharing. The camera work is excellent too!

@mortonuser 4 жыл бұрын

That's the best Lift-Modification i have seen in month. Thoughtful, easy, cheap and perfect working. Great!

@GWAIHIRKV 4 жыл бұрын

One of the best router lifts I’ve seen. Also like the use of laminate floor boarding. Brilliant. . . You have a new subscriber.

@christianmuller4027 4 жыл бұрын

Well done! And so much cheaper than an expensive brand milling table insert module. Greetings from Germany Chris

@jeffshaffer1939 3 жыл бұрын

Love the engineered materials. I use it for everything I can in my shop.

@joblaan7068 4 жыл бұрын

What a fantastic solution for the mounting of the router. And what a good idea to remove one spring. Thank you very much

@joebloggs7828 4 жыл бұрын

What else is there to say but, BRILLIANT! What a space saving solution, so clever. Well done, and thanks for sharing this build with us all...

@apmgold 4 жыл бұрын

Nice video, showing enough detail to be instructional, well don and thank you for posting. It is well worthy of the, almost, quarter of a million views in just over a week. Keep up the great videos.

@PastelComGini 3 жыл бұрын

Finally, a solid solution. I've seen so many videos with wobbly wood made mountings...

@SARXIAN Ай бұрын

Many thanks for your sharing of ingenuity, I finally validate an effective method !!!!!!!

@billrogers6863 4 ай бұрын

I appreciate that you shared these insights. My router is a Ryobi RE600. Over 30 years old and was made in Japan. It already has a screw for adjusting depth. But taking out a spring might make it run smoother. You provided some food for thought.

@markgilder9990 4 жыл бұрын

Thanks, I made one following your idea. Used a Bosch 1600 I picked up in the USA many Years ago, now it has a new lease of life.

@sidney001 3 жыл бұрын

Best idea for a router lift I've seen so far Plus I do like your table saw technique, very safe, very sensible Thanks for sharing

@user-ju9vu5xi9t 3 жыл бұрын

Смотрю с удовольствием Ваши идеи и видео, продолжайте в том же духе. Спасибо. Здоровья Вам.

@ruatarengsicolneyrengsi8924 2 жыл бұрын

This is really great work. Thanks so much for putting it for novices like me to see.

@barryl8857 4 жыл бұрын

I love the use of laminate flooring for the work surfaces. Guaranteed no wrapping

@mick2d2 2 жыл бұрын

Brilliant! Thanks for sharing! I love the DIY look of your well crafted tools! Been thinking of mounting my router, and was looking for a way of adjusting it without having to crawl under the workbench.

@adventureswithmaple4459 4 жыл бұрын

This is one of the best diy router lifts I’ve seen! Great video!

@mohamedfallahi9647 3 жыл бұрын

عمل جد جيد احترت كثيرا في كيفية صعود ونزول الآلة لكني وجدة في هذا الشريط الشرح الكامل اشكرك كثيرا واقدر لك هذا العمل 👍👍👍👍👍👍👍👍

@JunkWorkshop 4 жыл бұрын

Straight and simple! I’m gonna make one on my table saw. Really nice job bro

@carlosbaltagil1113 4 жыл бұрын

Congratulations, it's the best diy router lift in the web

@gotzolones 3 жыл бұрын

The sliding system of the router has convinced me a lot. I have it now with a car hydraulics and it is very bulky. Simple but effective.

@Aprendiz-de-Marceneiro Жыл бұрын

*One of the best router lifts I’ve seen.*

@marcciesla9238 4 жыл бұрын

Brilliant!! Le meilleur système 'router table and lift' que j'ai pu voir sur KZfaq. Je continue à dire que l'utilisation des lames de parquet est géniale, Bravo. J'aime beaucoup vos vidéos ainsi que les idées brillantes utilisées pour un travail de qualité. Prenez soin de vous et de votre petite famille. Marc (Paris)

@javierramirez8339 2 жыл бұрын

True carpenters made the own tools.👍

@gernotrieger2338 4 жыл бұрын

Fantastic! No show, no endless talking. Just pictures, who speak for itself! So ist has to be! Go ahead!

@uralaguza7618 6 ай бұрын

Все супер дякую.

@TheOPEREE 2 жыл бұрын

Great video to get inspired of to build a router table! Love it and thanks again for this great content!🙏

@mhc6777 4 жыл бұрын

Great video - It shows woodwork and metalwork can live in harmony! Thanks for sharing your work.

@alainrodrigues5716 2 жыл бұрын

Bravo l’artiste ! Une solution simple, économique et bien présentée. Merci !!

@weekendwarrior9570 4 жыл бұрын

Excellent video and process the music volume was perfect. The whole d--- video was a Joy to watch. Thank you so much. Bless you... I've been thinking of upgrading my new table saw with a setup similar to yours. Your a great inspiration with to the point solutions. Be safe out there.

@gottfriedrauecker6547 2 жыл бұрын

Super Idee, den Fräs-/Sägetisch aus Paneelen zu bauen. Dein Lift für die Fräse ist auch klasse! 👍

@gerardburnol9478 4 жыл бұрын

Une des meilleures adaptation réalisée sur youtube et je les ai pratiquement toutes visionnées !!! simple, astucieux, bon marché et facile à réaliser. Bravo !!!

@MrLemaner 4 жыл бұрын

complètement d'accord du grand art super et simple, robuste! J'ai une defonceuse X krtaft qui est une cousine proche de celle ci, je l'ai aussi mise sous table mais moins costaud je suis sans cesse ennuyé je vais moi aussi tenter de retirer un ressort... Bravo!

@bjorncj 4 жыл бұрын

Neat job. Watching your video is like a therapy. Well made video and Idea. Thanks for sharing.

@massiedesign7275 2 жыл бұрын

Just wanted to say thanks this video help out a lot making my inserts, made the jig you did and worked like a dream

@merrickbreck8226 3 жыл бұрын

Ingenious and well executed. Great video and easy to follow and understand. Always wondered if there were people like me who like to combine woodworking and metalworking. Impressive skill set. Thanks so much

@daveredd9832 3 жыл бұрын

It is good to balance out ones skills.

@boscoclifffernandes8572 3 жыл бұрын

The best router lift I have seen, great idea thanks ☺️ will definitely try to build it.

@radekgemel4946 4 жыл бұрын

Simple great. Fantastic idea. Now I know what to do with my router.

@rolfgolinski229 4 жыл бұрын

Sehr gut und einfach. Ich habe mir erlaubt den Lift nachzubauen. TOP ! Danke

@mikhailmikhail5265 4 жыл бұрын

Sumptuously! Grandiose! The best of what I saw on this subject! Low bow! Thanks a hundred times! Already doing this to myself! Health, success and success, Master!

@allainfrancois 4 жыл бұрын

Well done ! Congratulations from France

@daveredd9832 3 жыл бұрын

You have given me a lot of inspiration with this video. You make it look easier than it is I'm sure. After watching other complicated and convoluted videos on how to use a plunge router in this manner I was coming up with an idea similar to yours. Now I know I was on the right track and you answered my question on how to get the bolt to the top of the table neatly and the absolute best way to attach it to the router. You have saved me hours of screwing around and hundreds of dollars. Excellent stuff thanks for your brilliance mate.

@dorisdreyer812 2 жыл бұрын

Der liftbau ist ist zu umständlich, geht auch einfacher und schneller

@amazingwood 2 жыл бұрын

@@dorisdreyer812 Wo finde ich die Anleitung dazu oder kannst Du uns das erklären?

@wkkpatrick 3 жыл бұрын

This is the best thing I saw this week. Awesome 👏

@unitwoodworking5403 4 жыл бұрын

Its level of completion is high degree. You made well to use in woodworking and It's higher quality than things in the shop👍👍👍

@TobiasJStrand 4 жыл бұрын

Awesome! Was just about to build a tablemount for my router. Going to copy your solution from start to end. Brilliant! Only downside is that I will have to buy a new one to use as a handheld. Wait! Having an excuse to get new tools isn't a downside. Right?!😁

@dimakatsomookodi 2 жыл бұрын

yeah, everytime we mout handhelds means a trip to the power tools store 😀😀😀

@robertbutler8004 Жыл бұрын

This has to be one of the simplest router lifts I have seen built a great job.

@waynevercueil12 4 жыл бұрын

Well done. Excellent idea, execution, and great video work.

@NepsysHypertunia Жыл бұрын

*I just finished building the handrail on my deck **MyBest.Tools** and used this great little router to clean up the top rail before the final sanding and stain. It was light weight but packed lots of power. Either size battery didn't seem to make it top heavy and I'm a 64 yr old women so I really appreciated how easy it was to use...................... CORDLESS only way to go !!*

@GRINwood Жыл бұрын

In Ukraine

@user-om9lm9lo1f Жыл бұрын

Здравствуйте!!! Отличный лифт. У меня такой же фрезер как у Вас. Всё собирался сделать лифт к нему. Теперь знаю как и обязательно сделаю!!!!! Спасибо за Ваше видео!!!! Мастер!! !)))))))

@niklar55 2 жыл бұрын

I like the elegant simplicity of this design.👍 .

@samvimes1482 2 жыл бұрын

Super job, this is the best solution so far. Everything looks solid!

@syedsayeedurrahmanzaini4221 7 ай бұрын

What a simple design for lifting and lowering the router. Thanks for uploading. Best regards

@user-wc5wo1ey7r 3 жыл бұрын

Золотые у вас руки, мастер! 100 лайков!))) За каждое видео!

@vladimirmiraklov5292 3 жыл бұрын

Thank you very much for the interesting implementation of the router installation. I try to do the same for myself

@yairfe 4 жыл бұрын

Great design and execution!

@dlk4318 3 жыл бұрын

Great effort and even better results. Congratulations!

@havelockvetinari9395 4 жыл бұрын

Amazingly simple solution. If I was going to build myself a router lift I would use your method. However I don't need the lift because I recently bought myself a Triton TRA001 which has a Lift mechanism. I will use your router table insert though. Great work.

@lesneilson5632 4 жыл бұрын

I enjoyed your video and will use the hex nut bearing and coupler idea on my router lift - what a great idea and simple to use too thanks

@pgiamel 4 жыл бұрын

UN lavoro meraviglioso, che sogno di realizzare da diversi anni, ma i lavoretti continui a casa mi hanno sempre fatto desistere, penso che dopo il tuo imput comincerò a realizzarlo sicuramente Bravissimo continua così

@andrewford80 3 жыл бұрын

This is a masterpiece. Thank you

@J1I9M7M4Y 2 жыл бұрын

Very very nice router table. I like the use of flooring material!

@scottadams2624 4 жыл бұрын

Incredible! Great job!

@arnaldodoiarnaldo9965 Жыл бұрын

simple, practical, and efficient... cleverly done.

@robmo314 4 жыл бұрын

I always want to do my plunge router like that, thank you

@lesblack413 Жыл бұрын

The best designed router insert and lift I've seen on KZfaq. Just great. Cheers from Queensland Australia!!

@litvinovalexandr31rus 3 жыл бұрын

Молодец, из доступного материала и всё по полочкам.класс!!!!

@adrianburghelea9353 2 жыл бұрын

Great work ! You have a clever mind, good eyes and hands. You are si blessing ! Greatings from Romania, Mister !

@SkipHatchel 3 жыл бұрын

Dude has mad shop skills, nice work!

@samodelkin58 2 жыл бұрын

Отличное решение! Постараюсь повторить тоже такой лифт 👍👍👍

@mikemeadows7312 4 жыл бұрын

That's the simplest lift I've seen, Great idea.

@mikemiller9393 4 жыл бұрын

Nope, this is the simplest routerlift: kzfaq.info/get/bejne/erBkfLF4nMuleYE.html

@mustaphaboudguiga2759 4 жыл бұрын

If I have a workshop like this, I sleep in it. Well done !!!

@greensun2952 7 ай бұрын

So Wonderful !! Thanks~~

@harryshaw3813 4 жыл бұрын

I only have one word about this video AWESOME

@Erbsensuppe22 4 жыл бұрын

Great work, thanks for sharing this. 🙋🏼‍♂️

@HowIDoThingsDIY 3 жыл бұрын

Well done. Very cool. Lots of functionality without a table.

@Anakonda267 8 ай бұрын

Очень просто все и технологично лайк, прекрасная работа.

@mildlemon7866 4 жыл бұрын

Awesome work, well done! 👍

@01hdsilva 2 жыл бұрын

Un capó, hace rato que estaba esperando a que alguien me diera está idea. Gracias

@ssmith954 4 жыл бұрын

Ingenious! I think I have the same router -- going to try to use your design to try to set up the same. Many thanks for taking the time to film, edit and upload this!! Liked and subscribed!

@user-yb5ww9ur5z Жыл бұрын

This is a great design. Many thanks for sharing!

@henryrossouw930 4 жыл бұрын

My prayers are answered.Found the perfect router lift build.Thanks mate for sharing.One good thing from the corona lockdown.WILL build it tomorrow- 28/3/2020

@RockinBarBRanch 21 күн бұрын

Nice job, from America, U.S.A!

@tinom.2455 4 жыл бұрын

Top! for faster change of the reduction-rings you could use magnets...

@baltsosser 3 жыл бұрын

I like that idea. A goid Forstner bit and some Neodynium magndts embedded, and that change is easily accomplished.

@tinom.2455 3 жыл бұрын

@@baltsosser But consider, the reduction-ring could be catched by the router-bit and fly away like a sawblade. A solution could be to add an extra pin in the ring to prevent spinning