Great content, love the commentary and detailed description of the rational and purpose behind the building process.

You are the first person I have seen using tape instead of PT lumber. Don't know if that meets code but it definitely should. I'm proud of you for doing/showing that.

Y’all are just so fun to watch. Top tier infotainment. 👍

Great video! I really appreciate you keeping the camera rolling when you ran into issues on the real life job site and how you corrected or improvised/improved on as you went along. Too many times videos edit that out and that’s just not real. Thanks again, you rock brother!

That’s a Freakin Awesome Mezzanine Brother. You guys done a Awesome job on that deck, can’t wait to see the whole building when it’s done!!!!!!

I like this railing more than the cable one, so count me as a vote for seeing this railing put together and installed.

Thanks for sharing your work and teach us alot of skilfull Trick. Greetings from Honduras in Central America.

I love channels that keep it interesting without talking too much you also do a great job. I am not a carpenter, I’m a writer, but everything looks great to me. Keep it up!!

I believe that the "smile" curls more over time as it dries, not relaxes. (This can be seen more quickly over time with deck boarding placed outside.) Smile up I've seen curl more, ending up with a puddle of water in the center of each board. I believe the boards would be better placed with a "frown" so the high spot remains in the center.

Another fantastic video! Lots of tips to follow on my current build with Paul (Mr. PostFrame).

Nice to see that finally learned how to build a fairly proper set of stairs!

I really enjoy watchin u guys videos. U do great work

Wall mounted toilet will provide more placement flexibility. When this situation arises in the future. Great team work with your subs.

Just 2 months for 2 guys to build this building is crazy impressive! Would you guys be willing to do a breakdown of what this project costed vs what you sold it for? Just want to get an idea for cost.

Nice to see Greg wearing his "Iowa Lakes" sweatshirt!

That wall placement error would have had me sent. How that happens is mind-bending.

That’s is a great job guys I just got curious on the LVL hanging on the back wall just attach to the posts on 8’feet splits

Great job as always guys. 👍👍🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁥󠁮󠁧󠁿

Looks good!! Very quality work as always!!

Can we see a short of kyle having a talk with the plumbing sub about drain line placement?

Love to see the channel growth! Seems like you just hit 1M and now already at 1.5. Shows that your content, quality, and the way you teach is excellent. A couple other channels I watch have mentioned you in their videos because they learned something and are applying it to their build.

I'm not a framer, but I thought you always have to have double top plate to set the floor joists on? Great video. Thanks for great info and entertainment!

I really like this railing over the cable one. Like to see an install video of this one.

Large arrow stickers/decals in bright colors onto which you can write stuff like WALL might be a good investment

That timbertech railing looks boss on this application.

Love the time lapse 👍

Keep up the good work! Love these vids.

What supports your ledger just a couple sds screws into the 6 x 6 with a 2 x 4 underneath not much order support for that size of a balcony. Typically a ledger should be supported 16 inch on center with 5/8 lag bolts started into a solid wall, do you put any vertical pieces going down in between your 6 x 6 post to help support the Legerdemain ?

Love the black ceiling

You guys are amazing

Do you have to adhere to stair railings code of any opening be less than what a 4" sphere will fit? Looks like where your rise and run meets bottom rail is more than 4". FYI those who missed the math about figuring rise, 108.75 divided by the average between (code is between 7" & 8" (7.5") = 14 1/2" then round up ^ to 15 risers, 108.75 divided by 15 = 7 1/4" for each of 14 risers. The last riser will be up to the landing. Take off 1 1/2" for 1st tread at bottom. If you don't round up ^, your top tread will be at the landing height and each riser will be 7 3/4". This is where a lot of people mess up. Code for most places are, Rise 7" to 8", Run 10" to 12" Railing height from front of 2nd tread 36" to top of railing & any openings shall not exceed what a 4" sphere would fit into. Sometimes, also first & last rise can be different, but all intermediate risers shall be uniform. This is because we always pay attention when getting on & off stairs, but rarely do for each step through out.

The wall is off one foot? You may want to explain what burn a foot means. I'm so glad that you are man enough to show that mistakes happen and they need to be delt with promptly and efficiently. Thanks for leaving that (moving the window) in!!

Hallo aus Deutschland! So clean, really nice.

You guys are awesome!! Love your videos!

Outstanding work

The editing on the timelapses with the relevant noises is amazing. great video

I just love your video's Kyle! Keep up the good work buddy! 😁👍🏼😁👍🏼

You got the graim issue with the stair treads reversed. You used the analogy of a smiley face (grain up). Its actually the other way around. Grain will shrink into the into the board resulting in cupping. The proper analogy should have been a frown face. Im sure you know that...just got reversed when explaining. Happens to the best of us. Its a great point though that not all carpenters realized. It didnt really sink in until I started milling my own lumber. With that said, your work is exveptional. Keep it up boys!

I hope I get the opportunity to build my own home. Can't make money fast enough before the world goes to hell, it seems. I'll enjoy these videos in the meantime.

The sound in this reminded me of playing counterstrike.

Woo RR HQ!

This is why you unfortunately have to be there and watch the other trades. Sucks but you made it work.

Good stuff!

Lovin' the Bob The Builder time lapses 😂😂

You guys do good work looks amazing

Great job guys. Keep it up!

I made to 15:45. Invest your focus in building. Let go of the lazer and develope your team synergy. Once you and those around you can filter the communication amongst yourselves the process will become clockwork. Happy Turkey day ; )

This was awesome.

Y'all make it look so easy :P

This was definitely one of those days

What about the fire rating between the shop and office space. I-joists have trouble achieving a 20 minute burn rating because of the 1/2" OSB web failing quickly when exposed to fire. I figured you would have to use drywall or some other fire block under your subfloor to pass building code.

Any chance of a video based on recommendations for flooring over radiant floor. I would definitely appreciate 1. Great video as always. And thanks

What kind of socket bits are you using for your impact when driving the tap cons?

I know I would definitely hire you if I was building something like this…

Let's go!

Nice job. I like the part where you can adjust to the mistakes.

When you setup the laser an inch from the wall and use the receiver to plumb the wall, why don't you just measure from the bottom of the receiver to the target line on the receiver? If the measure is 2 1/2 just put your laser 2 1/2 inches from the wall then you can just butt the receiver to your top plate. Just my 2 cents :) Nice job!

Very nice 👍🏽

@7:00 you discuss how it's just going in a shop. But it's clearly going to have moisture from the concrete itself. Sure your tape helps, but any spill is still going to make it into those studs. I do NOT recommend this tape unless it's additional measure above / beyond treated lumber.

Do you still need to use PT timber on concrete if there is a dpc/plastic under the concrete? I am assuming that there is something under there due to all of the insulation everywhere else.

Question - At the 5:23 mark in the video couldn’t you run a chalk string line at whatever height you need, put your bottom plate in, then put the 2x4 on the bottom plate and raise it up and have the 2x4 touch the chalk line at 8ft and wherever the 2x4 hits the chalk line you’ll have a mark to cut it. Instead doing it the way you have been. Hopefully i explained it well enough to understand. Maybe something to try….🤔

I couldn’t hear Greg, did he say he likes to get splooged on?. 🤣🤣🤣

GOOD VIDEO

Why the vapor barrier inside of the fiberglass? batt insulation? Seems like it will trap moisture at some point, either coming and going. I understand inspectors might demand it, but something permeable would be better.

Do you have any recommendations on who can do post frames houses in Columbia ky area like you guys or do you guys cover up to here . That will be even better

How do you like that metabo circular saw? 🤔

Leave it to one trade to make life more difficult for the next trade through. Age old problem. Darn plumbers. LOL

As a plumber, I blame the electrician 😂😂 lol jk that fella should be running a jack hammer and fixing the issue, unacceptable if blueprints were available

Chainsaw works good when you gang cut.

How tall is that building total and what is the ceiling height on the first and second level?

Can I assume you used screws to attach the inside girts? It just looked like you moved those 2x4’s fairly easily. No tear out from trying to remove ring shank nails.

What are those blue and yellow shoes you guys are wearing?

Architecturally, are those outer posts OK to have that much weight on them when they're already supporting the weight of the roof? I'm doing a similar build myself but instead of putting more weight in the posts which will sag with time I'm framing load bearing walls in-between the posts for the joists to rest on. I see a lot of people putting a lot of weight on post barn posts just doesn't seem like it's a good idea

@RRBuildings, how does the black ceiling reflect light down to the floor for working? Does it make it noticeably darker than say a white or silver cieling? Thinking of doing black ceiling with galvalume walls for my wood shop. Thanks

Where do you get the stops for the bottom of the track saw rail?

Excellent job and very thorough with each item's explanation. I have a couple questions about the I-joists used for this. What is the approximate spacing for them here? Maybe you mentioned it and I just missed it, but I have a similar idea in mind and thought it best to ask. Also, this is probably a really "dumb" question, but what prevents the vertical web from bowing and splitting sideways in a load-bearing application like this?

I BUILD MY STAIRS THE SAME WAY, BUT WOULD HAVE SET THE LANDING DOWN TO ELIMINATE A STAIR ON THE STRINGER.

I see you do these regularly. What are you using for the ledger board on the outside wall both for material, and especially for mounting it? Structural lags? Need something stout to span 8+' between posts and support the weight of the mezzanine.

how do you know the concrete can hold that 2nd level? i'm trying to design 40x56' w/ 2 floors residential, but no videos that address beams, loads, maybe add a pier or 2 in the middle of floating slab? maybe just leger/rim board on gable end walls?

I would never put up with that! The plumbers f’d up. The plumbers need to fix it and at their expense! It’s not what or how the customer wanted. Look how much more time, changes, and “work arounds” now have to happen as a result of their mistake. I get it, people make mistakes. However, if you keep allowing it, it just enables them not to care (or as much) and gives them the impression next time they can get away with it too (if you decide to use them again). Additionally, when it comes to “timelines” I’m firm believer in doing things correct the FIRST time and pushing the timeline instead of “just for nows” having to come back and redo’s later

Nice work guys! What’s your opinion on spray foam insulation?

I was always taught the crown in wood goes up. Am I missing something?

Temp jackpost on landing...hmmm?

FRAMING SQARE…what kind/brand and where can I get that one (shown around 26m 7s)?

I'm sure this question has been asked before, so please forgive my ignorance. But what is that marking pencil (w the green tip) that you use many times. Is that an Amazon pick up? Thanks

Ledger

I’ve got some old used engine oil in a drum. Is it a good or bad idea to paint my white timber with it for protection??

So that’s how they can call it “rock “ wool. It’s made from melted sand, just like glass . So they could call glass “rock glass?”

My question is. Why don’t you post frame interior not being a jerk serious question

looks like you've never framed before, why put the packer on jacks? what if you want to adjust window opening ?

I’d like to see the rail install

Might be a bit of an odd question, but why did you frame out headers for the internal doors that are non-structural? I know the outside wall will need them, but with the internal doors it just seems like a bit of wasted effort and lumber.

Where did you get your railing from

Is there a wood top rail option for the railing system you used?

kyle, that diamondback tool belt rig, which model is it? are you wearing the drywaller?

how many mesuring tapes does wear out in 1 year normal ?

I'm surprised code allows you to not have a continuous handrail for the stairs. Unless its not being inspected of course.

What glue/foam are you using for the stairs? I am starting a house that I am doing a sub floor in and would love to have the floor quiet/not squeaky. Any suggestions?

Qual é o dimensionamento desse galpao?

If its not a bearing wall just cut all the studs the same and shim it between the top plate to the ceiling/roof joists. Cutting everything to exact is better but efficiency wise I feel it’s overkill because of pole/barn construction. Not judging, just conversation, I don’t build 20’ walls so I am not as versed as you guys. Didn’t want my comment feeling judging or demanding as if there’s only one way to skin a cat