Haha. Nothing like sinking all that work in for a beautiful left side with an ugly ass mount!! Definitely need one of those beautiful pieces on my bike to showcase your work.

I chopped the bend off mine and painted the raw metal. Has lasted for 4 years and looks factory. Sand, roughed up, primer paint, krylon gloss black, heated in an oven for a quick dry.

RSWarrior KyleNV where can I find the mount you make?

Hey, awesome tip! If you don't mind, I'm going to add that to the video description as a pro tip. I will also credit you for it as well. Thanks for watching the video and commenting. Hope it was able to help out a little bit and show you the parts needed and process to get it all finished up.

@@RSWarriorBryan yeah cool.. great vid indeed!

No problem brother! Thanks for watching!

Hey John, thanks for watching! I'm not using any bracket right now, and I'm still using the stock motor mount as well. I plan on upgrading to the KyleNV motor mount, but haven't gotten there yet. It really doesn't seem to rattle or rub a whole lot, but may actually look at it and see if I think it could use one. Thanks for the comment and idea! Stay safe!

Ok that's good news, I'll order everything today. I've got my relocation plate now too so I'll be following the pictures of the Warrior forum. Great videos buddy!

Thanks! I appreciate that. Hope they're able to help out!

Definitely want to get a tuner as well. You can get by without one, but the bike won't run to it's potential and likely run lean which would cause it to run hotter. I'd suggest the power pro black, but only because it's completely auto tune. Set it up and never have to really mess with it again. It is pricey though, so if that's not an option, I'd check into a used power commander three or something that will still allow you to change the air fuel ratio.

Hey Alex, thanks for the compliment! This conversation was literally being had on Facebook earlier. I went with Vibrant Performance which is a little more expensive, but there are also many other alternatives. Jiffy Tite also makes a quick release, but in my opinion, none looked as good as the Vibrant Performance does. I had actually ordered mine from jegs, but was searching around and seems they are all pretty much around the same price. Amazon seems a few cents cheaper on the straight connectors, but other than that it's all about the same price. I believe your bike is blue, so don't think you'll want my exact set up. going to include some amazon links to everything, but i'll be doing the black and blue hose, and black and blue connectors instead of black and red. this was the most expensive part of my left side clean up. Like I said, there are many other options that come in cheaper, this is just what I went with myself. Also, you can check with Jegs and Summit as well and see if it's any cheaper. Black and Blue 8an Fuel Line 2 Foot- amzn.to/2CECQKD Vibrant Performance Quick Release 8an- amzn.to/2D4gFyu Black and Blue Male Connectors- amzn.to/2SdIadc Hope these links help, and if you have any other questions get back to me.

Thank you for your reply Brian and being so kind at explaining this!

No problem at all! Glad I could help. A lot of people will swear by an wrenches. The pieces are aluminum and if you're not careful, they will scratch easily. I just used the two adjustable wrenches and made sure that I was very careful not to slip on it. Other than that, the only other advice I have is to be careful connecting the hose to both the reserve thank and the elbow under the tank. The elbow is a known leak point in a lot of bikes, and the reserve tank has a plastic fitting that can snap if not careful. The hose is definitely a tight fit, so be sure to lube it before trying to connect.

Nice! Glad that I already had links for you. Hope the prices and everything on them are still good. Thanks for watching the video also, I hope it's able to give you an idea of how to do the mod. It definitely makes that left side look good, and adds a little more custom look to it. If you run into any problems, feel free to get with me and I'll see if I can help. Thanks again, stay safe!

Awesome tip! Didn't even think about it, but definitely a good way to keep it clean on the end. Thanks for sharing and watching the video. Stay safe brother!

@@RSWarriorBryan for sure. I use heat shrink on a lot of stuff, makes for clean wraps, and looks pretty good, a few different colors available too. Need to stop being lazy and start working on my warrior again.

I'll definitely have to remember that for future projects. Anything wrong with your bike, or just needing to start modding it more?

@@RSWarriorBryan bike runs great! Just needing to start some more mods. Biggest problem I have lately is just trying to find time to work on it, or even ride it that much. I have to pack to much gear around with me for the railroad to really be able to r ride to the yard and back. Free time it's pretty slim right now.

I hear that. It's hard to find time myself and I'm home every night.

Really wish this was answered. Why is there 2 dry brakes?? Whats the point of 2?

Thanks for watching, and thanks for the comment. The dry break is just a quick release for the fuel line for when taking the tank off. Keeps any fuel from spilling out. The factory dry breaks have a tendency to crack after a while so it’s a good idea to at least watch for leaks if not replacing. Thanks again and I hope this reply helped answer your question.

Life of Bryan thanks man. Very helpful. Looking to eventually getting a warrior. Really like what u have done with yours. I have a 09 Kawasaki Vulcan 900 Custom right now. Just need that extra power ya know. lol

Thanks! Have a friend with a Vulcan, they're good looking bikes. I completely understand about needing the power though. This is my second warrior. After selling my first one, I went through five other bikes and none compared. Lessons learned though, I'll keep this one till I can't ride it any more.

Hey Bryan, thanks for the video!! Can you tell me what the left side clean up is for? Whats the advantage? Thanks again, your very good at explaining things.

Hey Alex, thanks for watching the video! As far as the left side clean up goes, it's mainly just for looks. The OEM dry break on the left side can crack after time, but it's just something you should watch out for, not necessarily dire to replace. Many people will actually steer away from the mod because it takes away the left side scoop which helps to deflect air to the rear cylinder. Me personally, I decided running a little hotter was worth the way it all looks in the end. I really appreciate you watching the video and commenting! Ever have any other questions, feel free to ask!

Hey David, tjanks for watching. Mine stuck the very first time I went to pull it apart and hasn't had a single problem since. I have also heard of it happening to a couple of others. One said that when he pulled his apart, the rubber o ring inside was halfway out and he had to send it back to be replaced. Can't remember exactly what I did to get it apart, but maybe tried putting it back together and pulling it apart a few times. Definitely keep me posted on of you can't get it apart and I'll se eofno can figure something out.

OK so that exact same thing just happened to me with the o ring but ripped inhalf. I've been talking to vibrant racing and seem they will replace for me also still only 3 months old and fails first time

I'm sorry to hear that! I will have to watch for more of that in the future and if it becomes a problem with many more people, I'll have to put something in the video telling so. Thanks for bringing it to my attention, and definitely keep me posted on what Vibrant Performance does.

@@RSWarriorBryan hey just an update they did warranty it they just needed to see a receipt to process

Hey Martin, thanks for watching! I apparently need to update that link. There is another link for just black line in the description also. The size is actually AN -8. I believe that is something like .44" inside diameter. You could probably go with a half inch inside diameter and be okay, the -8 is pretty snug. Hope that helps out! Thanks again!

Thank you! So exited I just picked up an 07 warrior and I’m about to start working on it!